I saw a video where the guy used air pressure. I was skeptical until I tried it. Blew me away. I had tried heat, a puller on steroids, and it wouldn’t budge. I applied a little air to it through the lube fill hole (I made a special fitting), and it not only came loose, it flew out 3 feet. I am now a believer.
Do you have a video on checking the internal parts or a video on how to re-install the bearing carrier? Did you hammer it in with a PVC pipe?? THIS DIY IS AMAZING!!!!. Liked and Subbed instantly!!!
Salt water or fresh water motor? Mines is saltwater motor I used chains and heat and all kinds of stuff can’t get it out. Does the drive shaft need to be pulled first?
Great job! I'm looking for a homemade solution to pull the upper seal carriers that are just underneath the water pump do you have something for that thanks
Just use a "T handle" style seal puller, but be careful not to score the housing wall that the seals abut. There are 2 (identical) seals underneath the water pump wear plate. Note their orientation for re-installation.
That is the best idea yet! Saved me on buying a hundred dollar tool. Thank you! 😅
Hell yeah. That’s a good way to do it . Maybe $10 in parts at a hardware store vs $200 carrier tool. I’ll try it out tomorrow
Absolutely ingenious. I spent a fortune on a tool for this. Made one the same and just works perfect. Super. Thank You for a great simple idea
Glad it worked for you.
I tried it yesterday. works like a charm. TY
Good job, Captain, you're awesome. A thousand greetings 👍👍👍
I saw a video where the guy used air pressure. I was skeptical until I tried it. Blew me away. I had tried heat, a puller on steroids, and it wouldn’t budge. I applied a little air to it through the lube fill hole (I made a special fitting), and it not only came loose, it flew out 3 feet. I am now a believer.
This method is so cheap it doesn't even require shoes. Beat that!
Do you have a video on checking the internal parts or a video on how to re-install the bearing carrier? Did you hammer it in with a PVC pipe?? THIS DIY IS AMAZING!!!!. Liked and Subbed instantly!!!
I seen one today want me to send video
It is really awesome this one we are watching
Salt water or fresh water motor? Mines is saltwater motor I used chains and heat and all kinds of stuff can’t get it out. Does the drive shaft need to be pulled first?
That’s freaking awesome thanks man.
Awesome idea but unfortunately my 12" half inch hooks began to straighten out. My carrier was so stuck!
How did you remove the retaining nut?
do you just push it back inside to reinstall? or is there something special you have to do?
Yes
Just push it back in
Great idea. Did you have the tool for the spanner nut for removal/reinstall?
i would watch that one!!
Yeah definitely not 1/2” eye bolts they don’t fir
Old school at its finest
Thank you
how long are the eye bolts you started with ???????????
Not sure. I think they were about 8"
@@floridaoffshore2725 THANKS !!!!!!!!!!!
Florida man wins again!!!!
How long on the I bolts
Overall length is 10"
I like it
Great job! I'm looking for a homemade solution to pull the upper seal carriers that are just underneath the water pump do you have something for that thanks
New School Piano I do not
Just use a "T handle" style seal puller, but be careful not to score the housing wall that the seals abut. There are 2 (identical) seals underneath the water pump wear plate. Note their orientation for re-installation.