Beginner scroll saw troubleshooting!! Jumping wood.
Vložit
- čas přidán 28. 06. 2024
- Beginner scroll saw troubleshooting!! Jumping wood, is a video inspired by the comments you share with us.
For any beginner scroll saw user, wood jumping about in the scroll saw can be detrimental to your scroll saw projects, confidence and progress in learning how to use a scroll saw in general. In this video, we share ideas that might be contributing to wood jumping around in your scroll saw and offer possible solutions to reduce the chances and amount that the wood jumps during your scroll saw projects.
This video is a must watch for beginner scroll saw users, wood jumping can be extremely off putting for any scroll saw user. It is a leading cause of scroll saw projects being spoilt and can destroy your confidence as a scroll saw user. Thankfully there are methods and factors that can significantly reduce this scroll saw problem.
If you would like to have a go at making scroll saw projects yourself, I have attached a link below to a page on our website that includes Free scroll saw patterns for you to download, print and use yourself.
www.thelovespoonworkshop.com/...
For more information about our family workshop check out our website www.thelovespoonworkshop.com/
For regular updates about the things we are doing find us on Facebook, Twitter and Instagram by searching for The Lovespoon Workshop.
Remember to take care and ALWAYS ensure your own safety when working with wood working tools and machinery. If in doubt don't do it!!
#scrollsaw #scrollsawtroubleshooting #scrollsawbeginners - Jak na to + styl
Good video, I'm a beginner and this helped a lot!
Good video with some good tips for a beginner. The clamp you mention to hold down your workpiece is supplied standard with most, if not all scrollsaws but most serious scroll saw users usually discard this pretty quickly as it gets in the way and blocks your view which becomes very annoying to say the least. I note you have the Hegner scroll saw and being an expensive saw it is my experience with that particular saw that the blade changing method used is disappointing and a newby would be very frustrated trying to line up a blade correctly as you demonstrated in this video.Anyone viewing this video and thinking of purchasing a new saw, my advice would be to make sure it has a quick release blade mechanism which will enable the user to change the blade very quickly.
Hi John, great to hear from you. The Hegner scroll saws all have the option of a quick release clamp. It's a fantastic, quick and efficient quick release system and has done a great job for us over the past 20+ years.
The clamp option is an additional extra that can be purchased for Hegner scroll saw. Whilst it is not my own choice to use it, my brother chooses to always use it as he finds it makes the process easier for him. It basically comes down to what works best for the individual. If used correctly it does not obscure your line of sight as its position can be adjusted. Usually it would be positioned slightly to the side of the blade. For beginners it can make a significant difference as it proves assistance with holding down, allowing them to focus on following the guidelines and cutting successfully.
Thank you again for sharing your thoughts and supporting our CZcams channel. All the best from us all here at The Lovespoon Workshop. 👍👍
Thanks this is soo helpful. I’m in like my first two minutes of ever trying to use one of these machines
Delighted to hear that the video was useful. Hope you enjoy working with the scroll saw.
Thank you for supporting our CZcams channel. All the very best from us all. 👍👍
A very helpful video. Thanks for the great tips and techniques.
Thank you, delighted to hear that the video is useful.
Thanks for supporting our CZcams channel. All the very best from us all. 👍👍
These videos are helpful as right now I have to use these in 7th grade middle school (which is kind of crazy to me) and I have trouble and sometimes get nervous because of the jump lol
Glad to hear that the videos are useful. Thanks for supporting our CZcams channel. All the very best from us all. 👍
What would cause the blade to keep twisting even though the blade is tight and sharp? For example, I tried to cut into a piece of wood and I noticed the blade had trouble getting into it because it looks like it wants to twist.
Hi Regina, a few possible causes for that come to mind. Firstly, a blade that is not suitable for the job. I recommend a Niqua Speed or Niqua Pebecco number 9 reverse tooth blade for working in hard wood. In the USA it might be easier to get the reverse tooth number 9 blade by flying Dutchman. It's basically the same blade. The other possibility is the quality of the blade you are using. If tension is correct and the machine is set up correctly it is likely to be a blade that is of poor quality or just not suitable for the task in hand. The type and thickness of the wood are other possibilities. The speed you feed the wood through the scroll saw is another possibility. Bit of trial and error involved in getting that one right though.
gracias e aprendido mucho con sus videos feliz navidad y un prospero año nuevo
👍👍🎄⛄✨🎅
Thanks guys!!
You're welcome, hope it was useful. Thanks again for supporting our CZcams channel, all the best from us all here at The Lovespoon Workshop.
Great tips wish when I started scrolling 40 years ago it was even difficult to find any information I pretty much got my first scroll saw was on my own where I lived blades weren’t easy to find few places had them not much choice once I got to knowing what I needed mail order was the best
I read articles I could find an kinda created my own technique great video
Hi Jerry, great to hear from you as always. Amazing how much information is available now. Dad spent many years working with the coping saw. He had a fret saw that was controlled by foot pedal instead of a motor. Needed strong legs for that one. Discovering Hegner was a game changer to be fair.
Thank you again for supporting our CZcams channel and sharing your insight. All the best from us all here at The Lovespoon Workshop. 👍👍
I'm new to scroll sawing. Just wondering what you use to fix the paper to the wood so you can work on your design?
Hi Anthony, great to hear from you. We use pva glue to stick the design onto the wood.
Thanks for supporting our CZcams channel. All the very best from us all. 👍
i have a craftmans 16" scrollsaw, had not used it in a while and the bellows dried up and cracked, anotherr thing i noticed is that when using tabless blades the bottom screw is at the side the table tilts down making it harder to replace blades
Hi Richard, Great to hear from you. You can often get replacement bellows, you certainly can for the Hegner scroll saws we use. It's the same with the clamps, you can often get replacements or upgrades like quick release clamps.
Thanks for supporting our CZcams channel. All the very best from us all. 👍
Thanks for the video, really helpful.
I also have a Hegner 2s with the clamping attachment, it's great. Could you tell me the purpose of the modification on your clamping attachment?
The one that looks like a sturdy bent paperclip?
Hi Ian, thank you for the positive feedback, delighted to hear that it was useful. As far as I can remember we didn't make any modifications to the clamping attachment, that was how it came when we bought it.
I will check with dad to see if he made any adjustments but I think it was like that when we bought it.
Thank you again for the positive feedback and supporting our CZcams channel. All the best from us all here at The Lovespoon Workshop. 👍👍
@@DailovespoonsThomas Thanks for the quick reply, really appreciate it.
Maybe my clamp is just incomplete, I got it used. If your dad doesn't remember I think I'll have to go on a hunt on CZcams and some forums, because I currently can't fathom how this part of the clamp functions.
Hi Ian, just had a chat with dad and he thought it might be something to do with the blade being square. Having said that we just checked and either ours has been bent or it is not square. 😂😂 It's a mystery to us. We will have to do some research into it.
Thanks again for supporting our CZcams channel. Great to hear from you, all the best from us all here at The Lovespoon Workshop. 👍👍
Half way to my Hegner boys!!!
They have certainly served us well over the years. 👍👍
Hi, can you please tell me where you got the dust hose from? I have a clear plastic one with metal end and it's no good. Thanks
Hi Geoff, great to hear from you. The hose is the one that came with the Hegner scroll saw. If I was buying a replacement, I would contact Hegner here in the UK. The purple hose is the later design (post 2003 if memory serves) and is better than the other machine we have with the clear plastic tube because it blows the dust away to the side as opposed to directly in your face.
Thank you again for getting in touch and supporting our CZcams channel. All the very best from us all. 👍👍
👌
👍👍
What saw do you used and were did you get it
Hi Daniel, great to hear from you. We have two Hegner Multicut 2s scroll saws both over 15 years old and still doing a great job.
I have attached a link to Hegner UK where I bought them from. I have no association with Hegner other than using their fantastic scroll saws.
www.hegner.co.uk/
Thank you again for getting in touch and supporting our CZcams channel. All the best from us all here at The Lovespoon Workshop. 👍👍
Glue to stick paper on wood? Super glue?
Pva glue, saves us time when marking out the project.
Thank you for supporting our CZcams channel. All the best from us all. 👍👍
Unik srcroll nya. Kurus tapi kuat 😁🤭
Thanks Jember, hope you enjoyed the video. All the best from us all here at The Lovespoon Workshop. 👍👍
Where is the reset button
What does it cost
Hi I, great to hear from you. Not sure what you are referring to? If you are asking about the price of the Hegner multicut 2s they cost between £700-900 new but you can get hold of them second hand for as little as £200-300.
Thank you for supporting our CZcams channel. All the best from us all here at The Lovespoon Workshop. 👍👍