Making Epoxy pieces with silicone We can be reached at any of the links below. Etsy shop/ www.etsy.com/s... Instagram/ @sweetcraftingmermaids Facebook Group/ www.facebook.c...
This is the best video I have ever seen regarding this DIY! It's people like you that make a difference for everyone else. I rate you a 5⭐! Keep it up.
Thank you, I am just learning how to make these for co workers, this helped alot.. btw I got 100 badge reels on amazon for 23$.. that look just like the ones from dollartree
Please make the videos for how to make the molds and cutouts. Just subscribed, looking forward to future tutorials. Wonderful job and thanks for sharing😄
TYML hello thank you for watching and subscribing. The video on how to make the molds is in the channel 😃 I will upload a video on how I cut my pieces soon 😉
Great video very informative 👍 i have a few questions though I want to try out but not how to go about doing so my questions is more with the paint and vinyl
If what your using to make the car emblem is resin/epoxy you can use paint to mix with your epoxy as long is not an oil base type of paint. You can make the piece mix paint into it once dried insert your vinyl the do a top coat of cleat epoxy/Resin on top of your finish piece. It’s what we call doming your piece. Hope that makes since. The only issue I would see is the epoxy/resin doesn’t do well in high heat. Some do but not all of them.
There are some epoxy/resins that withstands certain amount of heat. But I honestly don’t recommend a piece for outside only use. Maybe you can try fiberglass.
Then the design is sent to cut on our Glowforge laser cutter 😃 we use 1/8 acrylic to make our master piece. Once that is done we move to the next step which is molding 😃
With that type of silicone that you used for the molds, does it ever make the resin come out cloudy on the side facing down? That’s the issue I keep having with the liquid rubber I used to make my molds.
The cloudiness you are referring to means your mold is not shining, there are shiny molds and opaque molds. The shiny molds makes your resins piece to look shiny and vice versa. Hope I explain that correctly and didn’t confuse you.
How thick are your molds? The bus looks thinner in the mold then your actual bus you showed with how you put on the vinyl and then resin them. The scrub looked thicker in the mold. Also, where did you get the heart and half hearts to make the straw mold? Do you create?
In the video I used promarine, now I’m using kresin or artistry epoxy it all depends really I don’t have a preference but all three mentioned are good.
You can get a good used out of your mold depending on the care you give it. Always wash them with soap and water only. Don’t use torches or toothpicks to bust bubbles.
Loved your video and I subscribed. How do I get the svgs you are putting on the scrubs for the girls and the men? I enjoyed watching you make the molds. How do get the plastic shapes to use to make a mold?
Thank you for watching! The resin I use the pieces are ready to be demolded in 12 hours. UV light it’s not recommended with the type of silicone I’m using.
Hello, no worries 😉 yes we do sell our molds on our mold Etsy shop. Can’t copy the link here on the comment but it’s available on the video information.
Hi! Thank you for watching! You can change the color of the mold only if your using the white or clear silicone as in Dragon Skin silicone for example. The mold star 15 slow cannot be colored changed.
This is the best video I have ever seen regarding this DIY! It's people like you that make a difference for everyone else. I rate you a 5⭐! Keep it up.
Thank you 😊
You should be teaching classes….. in two videos…I’ve learned an entire skill set…… So Grateful !
Thank you 😊
Thank you, I am just learning how to make these for co workers, this helped alot.. btw I got 100 badge reels on amazon for 23$.. that look just like the ones from dollartree
Thank you for watching! Thank you for letting me know I will definitely check it out.
By far the best informative video
Thank you 😊
I ordered 2 scrub mold and the svg yay can’t wait to
Thank you so much for your support 🤗
Loved your video. I just ordered the T-shirt mold you make!! I cannot wait to get it...
Thank you for watching! 😊 and for your purchase 😃
Thank you, this is great information for me just starting out with resin. :)
Thank you for showing us how you make these.
Thank you 😊 for watching!
Do you sell or have the .svg’s available for the bus, scrubs, and postal delivery truck? If not, where can we get them?
The white pearly scrub tops are beautiful! If you could will you please show us how! I love your videos!
Thank you 😊 the white pearly scrub it’s white paint and recollection fine glitter mixed into the epoxy.
Please make the videos for how to make the molds and cutouts. Just subscribed, looking forward to future tutorials. Wonderful job and thanks for sharing😄
TYML hello thank you for watching and subscribing. The video on how to make the molds is in the channel 😃 I will upload a video on how I cut my pieces soon 😉
@@sweetcfmermaids1790 Thank you very much.
Do you have a tutorial on how we can make our pieces for molds? Thanks!
any vids on how u made the molds?and how do u get the vinyl to stick when adding epoxy
Thank you for watching 😊 yes there is a video on how to make the molds as well as how to complete the pieces with the vinyl 😃
can u show me how to make the vinyl in the cricut (scrub Life )
i already buy the svg from you but i am new
Hello, can you please make a video about how to make the acrylic blanks. Thank you.
Great video very informative 👍 i have a few questions though I want to try out but not how to go about doing so my questions is more with the paint and vinyl
We can help what is your question regarding the paint and vinyl?
@@sweetcfmermaids1790 I want to try something with lime green paint and vinyl not sure if it will work tho its for a car emblem
If what your using to make the car emblem is resin/epoxy you can use paint to mix with your epoxy as long is not an oil base type of paint. You can make the piece mix paint into it once dried insert your vinyl the do a top coat of cleat epoxy/Resin on top of your finish piece. It’s what we call doming your piece. Hope that makes since.
The only issue I would see is the epoxy/resin doesn’t do well in high heat. Some do but not all of them.
@@sweetcfmermaids1790 so the resin/epoxy can't withstand outside temperature at all
There are some epoxy/resins that withstands certain amount of heat. But I honestly don’t recommend a piece for outside only use. Maybe you can try fiberglass.
How did you make the original design in order to make the molds
I design my pieces on my computer I use Corel draw
Sweet Mermaids okay, then after you design on the computer, what’s next? I’m soooo new to this
Then the design is sent to cut on our Glowforge laser cutter 😃 we use 1/8 acrylic to make our master piece. Once that is done we move to the next step which is molding 😃
Where do you get the decals? Stickers
Hello 👋 thank you for watching we design and cut them ourselves with our silhouette cameo cutter. We have the svg available in our shop.
Just purchase your molds on Etsy!!! Thanks so much!❤️❤️❤️❤️
Thank you so much for watching and your purchase 😊
Where can I get the vinyl measurements?
Hello thank you for watching! The measurements are listed in the svg file on my Etsy shop.
How do you make the clear pieces that you are creating molds from?
Thank you for watching! They are made with our silhouette software made into SVG then cut with the Glowforge laser.
With that type of silicone that you used for the molds, does it ever make the resin come out cloudy on the side facing down? That’s the issue I keep having with the liquid rubber I used to make my molds.
The cloudiness you are referring to means your mold is not shining, there are shiny molds and opaque molds. The shiny molds makes your resins piece to look shiny and vice versa. Hope I explain that correctly and didn’t confuse you.
How thick are your molds? The bus looks thinner in the mold then your actual bus you showed with how you put on the vinyl and then resin them. The scrub looked thicker in the mold. Also, where did you get the heart and half hearts to make the straw mold? Do you create?
The acrylic pieces are all 1/8 all our acrylic pieces are designed, and cut by us with our laser cutter.
What type os resin do you use
In the video I used promarine, now I’m using kresin or artistry epoxy it all depends really I don’t have a preference but all three mentioned are good.
Where did you get your molds from😮
Thank you for watching! We design and cut all our pieces for the molds.
How many times does the mold last. Just wondered the longevity of the silicone mold.
You can get a good used out of your mold depending on the care you give it. Always wash them with soap and water only. Don’t use torches or toothpicks to bust bubbles.
What epoxy brand do you use
Hello, I don’t have a specific brand of epoxy to use but I do recommend artistry epoxy it’s the latest I been using and so far it’s a good product.
Please show how to make the acrylic pieces!
Loved your video and I subscribed. How do I get the svgs you are putting on the scrubs for the girls and the men? I enjoyed watching you make the molds. How do get the plastic shapes to use to make a mold?
Thank you for watching, the acrylic pieces we cut ourselves with our laser.
Cute, how do you make those clear pieces that you put in your silicone?
Thank you for watching! We make our own designs and cut them with our laser cutter.
@@sweetcfmermaids1790 your welcome, do y'all sell them?
@ashley Cortez yes we do 🤗 they are available in the Etsy shop
Did you ever make the tutorial on how to make the acrylic piece to make your mold?
Thank you for watching, I did make one I just haven't gotten to upload it :-(
Hi thank you for your video. How long do you leave them in the mold for? Or do you need a UV light for them to get hard?
Thank you for watching! The resin I use the pieces are ready to be demolded in 12 hours. UV light it’s not recommended with the type of silicone I’m using.
@@sweetcfmermaids1790 thank you. What resin do you use if you don’t mind ?
I use ProArt Resin by ProMarine
Hi, Sorry if I missed it but do you sell the actual moulds on Etsy? And do you have a link for your Etsy page? Thanks. ☺️☺️
Hello, no worries 😉 yes we do sell our molds on our mold Etsy shop. Can’t copy the link here on the comment but it’s available on the video information.
What do you use to make your acrylic shapes?
I use a Glowforge laser cutter
How do you cut your acrylic? Love your tutorials!
Thank you for watching 😊 we cut our acrylic pieces with a Glowforge laser.
@@sweetcfmermaids1790 Ooh, I have been craving a glowforge machine...is it as amazing as it looks? 🙂 Btw, love the Bustelo canister!!
jessica Velazquez Yes it’s one of my best investments I have made 😃 Lol! Bustelo all the way 🤩
Where do you get your medicine cups? Are they expensive.
I get them on line I’ll look for the link and post it for you. They are not to expensive.
I would love to know too! The ones I ordered have the notches in the bottom and I hate them.
@Melissa hello thank you for watching. The medicine cups where purchase at
Allegromedical.com
Hello i have a question what kind of epoxy are you using
Counter top FX epoxy
Thank you for answering 😊
can you change the color of the mold? Please share new follower Thanks!
Hi! Thank you for watching! You can change the color of the mold only if your using the white or clear silicone as in Dragon Skin silicone for example. The mold star 15 slow cannot be colored changed.
Why do you not wear a mask???