DHS Locking Plate
Vložit
- čas přidán 2. 12. 2015
- The DHS Locked Plate features - The DHS Locked Plates have a low-profile design, reducing the
risk of trochanteric bursitis. The DHS Locked Plates are made of 316L stainless steel and
are cold-worked for strength.
• The DHS Locked Plates are available in a wide range of
sizes and barrel angles, with standard or short barrels,
for varied clinical situations.
• The Dynamic Hip Screw is designed to provide
strong and stable internal fixation of a variety of
inter-trochanteric, subtrochanteric and basilar neck
fractures, with minimal soft tissue irritation.
• Two flats within the DHS Locked Plate barrel correspond to the
two-flat design of the DHS/DCS Lag Screw, preventing
rotation of the lag screw within the barrel. The two-flat
design also eases insertion of the plate over the
DHS/DCS Lag Screw.
• DCP® (Dynamic Compression Plate) holes in the
DHS side plate:
- allow angulation of 4.5 mm Cortex Screws and locking option for 5.0mm Cortex Locked screws, for lag screw fixation of medial fragments, and
- allow axial compression and multiple-screw fixation
of the main fragment in subtrochanteric fractures
with shaft extension.
.The DHS Locked Plate is indicated for the following fractures of the
proximal femur:
• Intertrochanteric fractures
• Subtrochanteric fractures*
• Basilar neck fractures
Thanks for uploading
Nice video
ممنون،عالی
Thank you sir
perfect video perfect view
Nice démonstration on non broken saw bone !!..the taping of the cervical screw was done without the guide ..? Also the plate was not exactly placed against the femur? What about IMN by gamma nailing...easier
...no blood loss etc.
Super performance sir 🙏🏼
Nice
اذا اريد استورد سيتات شلون طريقه التعامل والتواصل معكم
I've never used Sharma kit before. Did you use 4.5 locking or cortex screws?
Tornillos de bloqueo 5.0mm. Los de cortical son 4.5mm
تعال للناصريه بالعراق. شوف الشغل الخطأ بأستثناء د راجي
Sarjical ham bhi bnate hai sir
Dear sir, thanks for uploading video.
I do have three doubts pl kindly inform.
1. What is the best diet for bone strength after DHS
2. How long the patient have to wait to remove DHS screws ?
Regards.
tell me also please
Usually do not need to remove them unless mal union, nonunion, plate fracture or cut out.
y there is no sound
من الممكن ان يحل محل هذه الثقب الكبير مسمار بحجم اصغر واللعلم هذه الشريحة لا تاخد اكثر من وقتها لحين التام العظم وبعد ذالك تتشال من مكانها ويبقا هذا الثقب الكبير وياخذا الانسان فترات بل سنين حتا يلتام هذا الثقب ولحين امتلا هذا الثقب يكون معرض الانسان فى ايه لحظه الكسر فى مكان الثقب الكبير لانو العظمه ضعفت بعد ثقبها
audio not there
Super super
Plz add sound in video. Without sound or without explaining of the video.
ONLINE EDUCATION IS FUTURE EDUCATION...
احسنت
Hospita kaha ha apka
Audio por favor...
هذه العمليه خطا كبير اولا الثقب الكبير لا داعى منهو لانهو بعد ثقب العظام بهذا الشكل تكون العظمه قابله الكسر بابسط صوره لانهو اضعف العظمه بهذا الثقب الكبير فى طرق متقدمه اكثر من هذه الطريقة
الثقب الكبير لقشرة العظم فقط لا داعي لدخولها لعدم إضعاف العظم
I se phir niklwana pasta hai ka
Mostly nhi
After how many days can dhs plate and scroow be removed (If infection is happening?)
27 days
As soon as . Once the infected near to implant. Infection won't heal soon, after giving antibiotics too.
@@Left_ventricle2011 nope
@@Udit838 nope
@@devinthomas4866 yes
DHS DCS plate Neil screw kwar since pin box sir ham se bhi le liya kro
Sir kitne ki at h
@@amitkushwahakushwaha5422 DHS plate 400
@@amitkushwahakushwaha5422 kwire 15
@@amitkushwahakushwaha5422 since pin 50
@@amitkushwahakushwaha5422 ph no dedijiye sir
nothing to add in new orthopedics
Mere Bhi DHS Hua Hai 2 Month Ho Gaye Hai Kab Tak Chal Pauga
Quita
طب انت أخرس يعني ازاي الناس حتفهم يعني