XP Deus II (2) - An alternative way to use the WS6 headphones without them hurting your ears!
Vložit
- čas přidán 22. 08. 2024
- There is no doubt that the WS6 headphones are amazing and the puck is a class bit of kit on its own, but some people struggle with the over the ears design that it entails. this is a relatively inexpensive way to cure this issue and protect the puck.
We were lucky enough to get a XP Deus 2 on launch day! We paid full price, and over the next few weeks we'll be going through things that we like, dislike and tips to make your detecting easier and more fun. Stay tuned to see more.
my Facebook page - / griffindsuk
Anyway, thanks for coming to my channel. I hope you enjoyed my video. If you did, why not treat yourself and subscribe and SMASH that bell.
Music under licence from Kodu_promusic and SFXvalley, with incidental music from JBanks on a standard licence through Envato Market.
Ignore me I'm here for the algorithm #Program #noneofthefollowing #Roman #Hammered #Gold #Silver #coins #Celtic
XP Should just let us pair bluetooth headphones like Minelab.
Yeah, agreed. 👍
Triple double agreed
Quadruple agreed. The XP designers have over-engineered this and ended up with two expensive control units - each of which needs mastering and twice the chance something will bust.
100% spot on. Would love to use my BT bone conducting headset with this unit.
Yet another very useful tip for deus or would be deus users. 👍
For those who don’t know. The Deus II will be sold later this year/next year as a Deus 2 WS6 master. Basically it’s a Deus 2 but without the RC but will be able to buy a new headphone coming out called WSA 2. And those will connect to the WS6 puck wirelessly.
That's some awesome information. Cheers ☺️
@@GRIFFINds so basically the WS6 puck will attach to the stem clip and the WSA2 will be used for sound wirelessly with basic volume controls like the WSA ORX headphones.
The price isn’t confirmed on the ws6 master as yet.
Genius mate... They should let you work for XP... I'd buy loads from you!!!
Very kind words coming from an awesome channel like yours. Wish I could pull out Romans and Saxon coins like you do. Thank you and good luck in the fields. ⭐👍
@@GRIFFINds bless you mate thank you! I’m very fortunate to have that land!
Absolute genius! Bravo 👏
Thank you so much. Your channel is one of our favourites, btw. Grif 💙
@@GRIFFINds right back at ya mate!!
Awesome.
I did this for ages with first deus when i thought it was too much money for a full deus. Put some tape around it and fixed it to the shaft. Found a lot more with that cheapest kit than with the dedicated sea detectors i used later lol.
It would be better zu adapt the WS6 to the WS1/2 Headphones, they was sitting perfectly, especially if you wear glasses. I dont know why XP switched to the uncomfortable WS4/6!
Iam waiting for the WSA2, perhaps they have another hanger, perhaps like the WS1...
Thanks for great idea
No problems at all. Glad to help ☺️
how do you go about charging? Is that done through the 1/8'' jack? Thanks.
Hiya, no the access port is still accessable as there is a cut out in the stem mount case, so the access flap/cover can be opened. Hope this helps. ⭐👍
This is absolutely genious!! Again though like the last tutorial I think it would look much nicer filmed in day light and in focus. No need to rush these cool tutorials, take your time. If you get these right they will do wonders for your channel 🔥💥🔥💥🔥✅
What is genius, you can read this on the XP website too...
@@hubsi5263 Welcome to the 21st century buddy, a world where we don't have to read anymore 🔥💥🤺
Thanks Gareth. Unfortunately, Dad works from 8am until after 5pm so it's difficult for him to film in the daylight as there is none when he's home. I didn't want to wait until the weekend to put out these tips we have, as it's time lost while the iron is hot. Thanks for the feedback, as always. Henry 👍
@@GRIFFINds while the iron is hot 🔥 Fair enough mate, failing that then use fake lighting, desk lamps, torches, anything, improvise. Its the little things that make the difference in this game
Would I be able to connect an audio port to bluetooth adaptor to the puck and use my wireless bluetooth headphones? as opposed to wired headphones? My deus 2 is coming this week finally.
Yes using the jack provided on the adapter I speak about in this video.. However make sure your adapter is low latency or you'll have a lag on the signals in the buds. 👍🏻⭐ Thanks for watching ⭐👍🏻
Thanks. I wasn’t sure if the ws4 adapters would fit.
No problems at all 😊
Excelente equipo amigo
Hi, thank you for sharing. Please can I ask if I can run the same setup with my earbuds but with the wsa II.
So I would have the main control unit, wsaii. I don't have the ws6 puck. And wouldn't want to buy it just to wire in my own earbuds.
Thank you.
Unfortunately the only way to use your own earbuds is to use the puck with the adapter and a wireless receiver. It's a shame that XP do this. I suppose it's to decrease latency and to keep you buying XP products 😞
Thank you for watching and being part of this community 👍🏻⭐⭐⭐⭐⭐👍🏻
@GRIFFINds Thank you for replying so fast. The wsaii also have a detachable control unit. Which states on xp website that you can connect a hard wired headset. But do they mean their own wired headphones or any wired headphones or earbuds? If I have the main deus ii controller. What's the difference between the ws6 and wsaii as they both have a detachable control unit and both take the jack.
So confused. Appreciate your time and videos. Thank you.
Ah, now I understand. I would believe that as long as a jack can be inserted into the WSII headphones, I would suppose that a Bluetooth receiver could be inserted into the jack... But I don't know if it will add any latency delay to the tones. Sorry I can't be any more help. 🤔😔😊
@GRIFFINds Yes you can insert the jack into the wsaii. I don't want to use bluetooth, only my wired earbuds.
Thanks 👍🏻
* Subscribed * Wonderful tip especially as I wear glasses this setup will be more comfortable, the small case ( Not the rubber one) that you put WS6 in any links where i can please purchase from... Thank you.
Hi, this case is really old, like 7 years old. However, this case below measures the same so should be fine. Good luck in the fields. 👍⭐
Sukisuki Earphone Mini Zipper Case Headphone Storage Bag Box USB SD Card Hard Pouch (Silver Grey01) www.amazon.co.uk/dp/B081VPVBGR/ref=cm_sw_r_apan_glt_i_4DWZ8DKWRXGEW2P48G87?_encoding=UTF8&psc=1
Thanks for the sub. Any case 3.2" in diameter by 2" high should be fine ☺️
@@GRIFFINds Thank you very much for your help :)
No problems 👍
Hi, the case was one of these from Amazon.
Sukisuki Earphone Mini Zipper Case Headphone Storage Bag Box USB SD Card Hard Pouch (Silver Grey01) www.amazon.co.uk/dp/B081VPVBGR/ref=cm_sw_r_awdo_J9KPM0ZNJ77P1GPCC6J4
The plastic puck holder was from Regtons. regton.com/xp-ws4-stem-support.html
I hope this helps. Thank you for watching and supporting our channel. Cheers
Great video and thanks for the tip. If you get a chance reply please let me know where you get the little puck from in the US.
Hi, the case was one of these from Amazon.
Sukisuki Earphone Mini Zipper Case Headphone Storage Bag Box USB SD Card Hard Pouch (Silver Grey01) www.amazon.co.uk/dp/B081VPVBGR/ref=cm_sw_r_awdo_J9KPM0ZNJ77P1GPCC6J4
The plastic puck holder was from Regtons. regton.com/xp-ws4-stem-support.html
I hope this helps. Thank you for watching and supporting our channel. Cheers
In the US it'll be called a stem support in the USA. bigboyshobbies.net/xp-deus-ws4-stem-mount-support
Any case 3.2" in diameter by 2" high should be fine ☺️
Do you need the the rc like why do they also sale the rc ? What does it do differently?
The RC is there for you to tailor your own programs and gives the machine much more flexibility. At the moment there are no plans for a Deus 2 lite. Thank you for watching ❤️👍
Where did you buy the little case from?
It's called a stem support. They're available from eBay. Unfortunately Dragon Detecting don't stock these at the moment, otherwise I'd send you there for your 10% off. www.ebay.co.uk/itm/234689686110?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=45HUHZTFT6u&sssrc=2349624&ssuid=boiggsz0sug&var=&widget_ver=artemis&media=COPY
If you're looking for the fabric case I think this one should fit.
www.ebay.co.uk/itm/255077609444?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=FkHd4yVUSGu&sssrc=2349624&ssuid=boiggsz0sug&var=&widget_ver=artemis&media=COPY
Thank you for watching and supporting my channel. 👍⭐
@@GRIFFINds Thank you for the reply and links.
I’ve been looking for the fabric case, but couldn’t seem to find any. I’ll pick that one up now. Thank you again 👍
Just measure the unit and get the measurements off of the case you're buying just to make sure that it will fit inside. The one I have is no longer available but I'm sure that there are other ones that are similar size. Thanks again!
I can't help thinking what on earth the point of this Puck is? Surely, the main control unit transmits signals to the puck, so just use any headphones that uses the same protocol. As for XPs own protocol being 10 times faster than Bluetooth, my reaction is so what? Bluetooth on every machine I've used (the Equinox 800 being the latest) has never been a problem, is more than fast enough. Making something even faster to avoid latency in signal transmission is just over-engineering a solution to a problem that doesn't exist.
I have no doubt the Deus 2 is a good machine but back to the original question - what is the point of the Puck?
Where did you buy the WS6 case bud
You mean the rubber casing? It's actually for the WS4 but the WS6 fits. Available from most XP retailers. Type in WS4 stem mount. Hope this helps. 👍⭐
Sorry no the actual camo case you put ws6 in
Hi, this case is really old, like 7 years old. However, this case below measures the same so should be fine. Good luck in the fields. 👍⭐
Sukisuki Earphone Mini Zipper Case Headphone Storage Bag Box USB SD Card Hard Pouch (Silver Grey01) www.amazon.co.uk/dp/B081VPVBGR/ref=cm_sw_r_apan_glt_i_4DWZ8DKWRXGEW2P48G87?_encoding=UTF8&psc=1
Nope that’s interesting. 🙂
Hi , where can I get the puck holder ?
Regtons if you're in the UK. Here's the link.regton.com/xp-ws4-stem-support.html?gclid=Cj0KCQiAu62QBhC7ARIsALXijXS3XG_c7pzL39S3yURTBSMU2CPTX2Q47Pd6w48QpS2MwIf7pwFXuRsaApPYEALw_wcB
@@GRIFFINds thanks
No problems at all. Happy hunting 😁
It's called a stem support. They're available from eBay. Unfortunately Dragon Detecting don't stock these at the moment, otherwise I'd send you there for your 10% off. www.ebay.co.uk/itm/234689686110?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=45HUHZTFT6u&sssrc=2349624&ssuid=boiggsz0sug&var=&widget_ver=artemis&media=COPY
If you're looking for the fabric case I think this one should fit.
www.ebay.co.uk/itm/255077609444?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=FkHd4yVUSGu&sssrc=2349624&ssuid=boiggsz0sug&var=&widget_ver=artemis&media=COPY
Thank you for watching and supporting my channel. 👍⭐
Eureka👎🏻
Thanks for watching!
@@GRIFFINds 👍🏻