3D Printed Spin Ball Toy | Best Things to 3D Print

3D Printed Spin Ball by RuvenBals
Printed On Bambu Lab X1-Carbon Using Filament eSun PLA+
Printed without Supports, Printed without Rafts, Infill 10 %
There are 2 versions, one with only printed parts and one uses regular skateboard bearings.
All Printed Version: You need: 8 Gears 1 Heart 8 Connectors
You can just print the All file.
Print settings: no supports needed. Just print with a standard profile. I used a brim for better bed adhesion.
Assembly: Push the connectors into the heart and then put the gears on top.
Bearing Version: You need: 8 Gears 1 Heart 8 Regular skateboard bearings
Since this version is very tolerance-dependent, I provided many different versions. Start with the 8mm and 22mm version and if that does not fit, go bigger or smaller. Make sure to use the actual filament for the test.
Print settings: Use supports for the gears. The heart does not need supports but maybe a brim.
Assembly: Push the Bearings in the heart and then the gears into the remaining hole of the bearings.
STL
kady3dprinting.com/model/3d-p...

[@TheLastRealPanda]

My brain just purred

[@gaming2.0no14]

Make Beyblade 😅

[@frankjohnson8006]

Fun project for an aspiring engineer

[@Ulthane-40k]

That one is cool might have to make one

[@user-ii9bs9gv8z]

Я чуть ли не крашнулся

[@abudik777]

Make a Rubik's cube out of this, pleaseput different colors

[@janaans6938]

وااااااااااااااو

[@0marhamada386]

فلسطين حره 🇵🇸🇵🇸🇵🇸

[@ericavaldivia6999]

Está muy hermoso una obra de artista y te felicito por todo lo que hiciste también❤❤❤❤❤

[@FranoBarac74]

Cool

[@umarfarooque8500]

Making useless things! Okay

[@Kady3DPrinting]

It’s very useful