Video není dostupné.
Omlouváme se.
Headrush Rig for Every Gig - for Prime, MX5, Pedalboard, Gigboard
Vložit
- čas přidán 18. 08. 2024
- Make a donation to support the channel: paypal.me/peter...
Compatible with Headrush Prime, MX5, Pedalboard and Gigboard. Download: drive.google.c...
0:00 In use at a Gig
0:41 Intro Blah Blah
1:08 Compatible Headrush products
1:20 How Scenes work
1:32 Clean tone demo
1:51 Two Scenes per foot switch
2:18 Crunch tone demo
2:35 How Presets work
3:43 Dirty tone demo
4:10 Using Compressor and EQ as gain boost
4:22 Lead tone demo
4:41 Tape Echo Delay
4:52 Tape Echo tone demo
5:07 Blah blah Vibrato
5:23 Vibrato tone demo (clean)
5:43 Vibrato tone demo (dirty)
6:03 Presets are powerful!
6:10 "Always on" 800ms ping pong delay
6:35 "Always on" reverb
6:47 Cloud reverb tone demo
7:25 switching between 1/4 note and dotted 1/8th note delay
7:40 Octave Up
8:04 What should my next video be?
8:24 Playing outro
I love your content! I’m a pastor and use the MX5 for our worship services. Your Every Gig Rig covers every tone that I would use in a worship set. Thanks for sharing and keep playing for the glory of God!
Thanks Andy, so glad you find it helpful!
Why does your worship team need another guitar player with you playing? You can cover all the parts brother! Beautiful setup you have there.
@@im58woody yeah but I LOVE playing with my guitar bros. We always have a great time working out the parts, playing off each other and talking about gear!
LOVE your tone! Pls make a video about dialing in various tones in HeadRush, like the ones you used in this vid. Thx!
I’m happy to see the Headrush getting some love from the P&W world! It’s been all Helix! I just got the Prime 2 months ago & absolutely love it. Had the OG Headrush before & loved it too
That is awesome!
I love your content just the way it is! I would love to see you upload more often and share your rigs more often.
Once again, you've put up the best effects ever, and your instructions for installation were so simple. Thank you!!!
Glad you like it!
Had never seen any of your content, someone suggested it. Your level of explanation is perfect for me, I’ve just purchased an mx 5. The loaded presets most are pretty rubbish!!! So I need a good starting point. This vid has helped me no end!!
Have subscribed and will be looking through your vids now. Thanks again
I am so glad you find these videos helpful 😀
great video, to me there's a good balance between the playing and talking. everything is well explained. I subscribed to your channel.
Awesome, thank you!
Yes, it's a perfect balance as it is now!
Great video man. Whatever way you do the video I’m sure will be great. God bless
Thank you so much for your content and open sharing. I'm a fellow worship player/singer. I am new to the Headrush platform
Really useful content, talking level fine.. would love to see content on use of looper or playing tracks for practice or live run with Rig elements used
Aye, thanks. I downloaded the rigs. I find myself using it often. Mostly on bluesy stuff. I changed the reverb and delay to fit better with my work. But this sounds great. Thanks again
Hey, it’s Aaron from the Headrush group. Just uploaded the Silvertone clone that we discussed✅
Your videos are pretty ideal at 10 mins. Good mix of tone examples, downloadable rigs as well as useful applications. I like the focus on Headrush so I’ve watched all of your videos. Keep up the good work!
Thanks for uploading that Silvertone, Aaron. There was one for $500 at a GC store that I played years ago. Still kicking myself for not buying it! Now I get to have one (virtually) all these years later 😀
@@forthecreator1 very cool!
Also, an idea for content would be some simple guidelines for eq and frequency cutoffs. Your following is naturally going to be worship style players so signal paths will always be interesting since it’s common to layer many effects for those big sounds.
In my opinion, you have created a great resource for headrush users my brother!!!!!
Thank you very much!!!!!
You are the best! Help us a lot!
If you've played around with controlling the Core with MIDI, would love to see more info. I'm having a challenge finding info about how to set up and change rigs and cc parameters on the Core over MIDI. Thanks for sharing your knowledge. Beautiful tones!
Sorry, I have not experimented with external midi control.
Wow, I just played Firm Foundation two weeks ago but not near as good as you. And your Hillsong Worship intro was dead on. Another great video. I posterd on your other video that I'll be getting my HRPrime tomorrow and I will surely be looking for your videos. I play the same songs as you do I'm sure. Yesterday was a Phil Wickham day. I plan to clone my Plexi, Julia and Volante and save for the next time. Again Great video. Love the in ear monitor also. Forgot, you are an excellent player, exactly like the original.
Thank you!!…. I’m new to headrush and this is what I was looking for!… i just got a HR prime and I’m loving it
Enjoy it!
fantastic tones and great playing!
Thanks for listening!
Great content and wonderful sounds. I hope to incorporate into my HRPB. Thank you. Peace to all.
loved the video!
Thank you!!
nice work!! thanks 🙏🏼
Thank yiu so much for the tutorial and the tone patches. ❤❤❤. Sending love from the philippines. Godbless
Happy to help!
Amazing....God Bless you
Awesome!! Thanks and keep them coming please!!
Great content! you got some fantastic tones!
Thanks Travis!
So helpful
I would love to see/hear how you setup your reverbs, meaning how you apply the settings to get what you want to hear.
This is a great suggestion! It’s something I’ve been working to improve over the last couple of years.
Awesome ideas, thanks for sharing!
Glad you like them!
muchisimas gracias
Another GREAT!! Sounding Rig!!! Thanks
Glad you like it!
God Bless You :D
I love the simplicity of your rig😂
Do you connect straight to a DI box?
Anyway I can copy your rig tone?
Thanks
You can download the rig I’m using, from the Description section on this video
Thank you!😀
Thanks for sharing, just found your channel and subscribed.
I play drums and guitar in my church worship group. Quick question but does the gigboard have balanced outs so run straight into the mixing desk?
All Headrush have balanced outputs and can be connected directly to the console, HOWEVER only the Pedalboard and Prime have XLR outputs. The others have balanced TRS 1/4” outputs, so you would need TRS to XLR cables, in order to plug into an XLR input
Mx5 have such deley when switch..😢. But thanks for your help 🎉❤
Great video!
Thanks!
Hi Peter, thank you for the rigs, you have obviously given them a lot of thought. I noticed that you mentioned the Marshall tone but you have this mixed with a Bogner Blue, is this just a pairing that works. I was also interested to see no gain staging, but the combination of the Bogner and Marshall create a great sound, also a clever idea of engaging the graphic to pull some frequencies out, and tame it back a bit. I think your presentation is great with a balance of playing and talking and about the right length. I think someone asked about reverbs and more of an in depth dive - I think this would be a good idea. Can the HR sound like some of the most used reverb settings on a Strymon Big sky for example.
Keep up the good work.
Having different amps left and right gives the sound a width in the stereo field. If the amps are too similar it doesn’t seem to work quite as well. Eg. Vox and Matchless didn’t give me the width. I actually have a Headrush vs Big Sky video shot already, I just need to record an intro jam and edit it. Hopefully get that posted in a few days
That’s great Peter. I have been listening and tweaking your rig using headphones but I am only able to play in mono at Church, so I assume it will sound differently? W
@@warwickgb I havent played in mono for several years so I’m not really sure if tweaks are needed. Maybe reverbs and delays will need to be turned down slightly?
You can talk a lot because it all make sense..❤
I think the content you put up on your channel is very helpful👍 was wondering if maybe you could do one about the programs you use to practice with that has all the cues etc. Is it the same program the rest of the band use? Do you stick to the cues etc. Something along those lines😉would be very interesting and helpful i think😊
Good suggestion for a video, but in the mean time here is where you can find out more: Www.multitracks.com. If your church already has a subscription they may be able to give you your own log in. Or if you just want your own subscription there is the SOLO PRACTISE BUNDLE app for $4.99/mth
Any new Headrush content coming soon my friend?? 🙏🏼
love your vids! btw how did you make the jumping delay mixed with quarter and dotted 8th?
The delay that bounces left and right is the Dynamic Delay set to 800ms (fixed). You can download the rig and then you would have all the settings for your own use
Great video, are you using the global eq on the MX5? And if you are, how do you have it set, sounds really good!
I never use Global EQ. When you download the rig, it will sound exactly the same as in the video
@@forthecreator1 Thanks for replying! 👍
Hey bro thanks for the content. I've been thrown into some last minute worship sets lately and your rigs saved me. How do you handle multiple guitars? I find the same rig sounds drastically different if I go from my tele to my gretsch or strat, for example. I've been using the global eq settings on the mx5 but what do you do?
I switch between a Gretsch and a Tele…and make no EQ changes whatsoever. The two guitars sound very different from each other, but I embrace those differences and adjust the way I play, to match the natural tone of the guitar
How do you connect the headrush pedal? In my case, the dirty sounds extreme compared to what you show on this video. Wondering if Im doing something wrong and my rig sounds super harsh. I connect my headrush to the Power Amp In on my katana mk2. Should I use the regular Guitar IN instead of the Power Amp In? Thanks
COOL
Hello @forthecreator1. I really appreciate your content. That's very good. Then, if i want to use these presets for worship, how can i have them ?
Scroll up from where you are reading this. There is a DESCRIPTION section in CZcams. Open up the DESCRIPTION section and you will see a download link
@@forthecreator1 okay Thank you
Question I see there is 3 different amps within the rig. Do I need to click those to switch through the scenes or as I click the buttons are they switching through them?
The footswitch changes the scenes, and the scenes change everything (including which amp is used, which IR is used, the EQ setting, the compressor setting etc)
so good
Thanks George. Did you see my Headrush vs Big Sky video? Your earlier comments were the catalyst for that video
Great! is there much difference between MX5 and new Core (amp-wise)?
MX5 has plenty and I can (and have) gig with only the MX5. But Core does have a lot more choices. If you can afford the next gen (Core/Prime), go for it. But if your budget is tight you’ll get still get excellent results from MX5
Are u going straight into the desk. I went straight into the desk with the hotone mp100 and sounds terrible. I upgraded from the nux mg30 and both no good. So I had to pull back out my valve amp of cause anything sounds good threw a real valve . As we just play in a duet at present was hoping to get rid of the valve amp weight and room. Have 2 line aray pa threw a 8 Chanel mixer. Try the xlr out andquter jacks still terrible. Do u think the head rush mx5 will cut it
Yes, I believe it is possible to get excellent guitar tones from the MX5. Some people have difficulty creating those tones (due to lack of experience), and for them the best option is to start with some pre made sounds that others have created. I have no experience with the other pedals you mention, so I can’t comment on those
I bought a midi controller for mx5 and it gives me 4 extra footswitch. I thought the logical way to use it giving 4 different rig for extra fswitches and using scene+pedal on off combinations from mx5. What do you think and how can I use it differently any ideas? Maybe using 7 pedals in preset but i have to add different amps then in one rig maybe.. thank you for contents and videos.
I would probably use the footswitches on the MX5 to change scenes, and the external footswitches to turn individual effects on/off within those scenes
Hello, we just got the HR core recently and we will need a basic mixer to make all the needed connections; 2 singers, guitar & one keyboard (drummer has to hear us also) so trying to figure out what would be the best way of connecting the headrush to the mixer (mixer balanced output to PA speakers & at least one monitor for some upcoming small outdoor gigs). Not sure if you need your own mixer but wondering if you have connection suggestions...
I simply have two XLR cables going from Headrush to two channels on the mixer(channels are panned left and right). For monitoring I have a mix coming out of the aux output of the mixer, to a headphone amp, using in-ear-monitors. Alternatively, you could take that aux output to an FRFR
@@forthecreator1Hi, thanks for the reply! I just found out that there are some adaptors for XLR called inline pads to make sure to match the mike inputs levels on a mixer, which I was concerned about. Do you use those or a DI box? If we want to keep the vocals & guitar outs separate, I guess headphone outs could work for monitoring?
I do not use a DI box or a pad. If the signal is still too hot after turning the gain on the mixer channel to zero, then I turn down the master volume knob on the front panel of the Headrush. Yes you can arrange your monitoring outputs however you wish. I recommend each person hasvthri own aux send: that way they can each have a difference mix, hearing whatever they need
@@forthecreator1Last question, did you need to get a high end mixer not to mess up the sound quality or tone from the HR? Right now we won't be able to afford more than a basic mixer (possibly berhinger), I'm hoping by not adding anything else than the faders (and maybe the DI), that it will remain reasonably transparent...thanks again!
Thanks great video! How can you access the extra delays and reverbs using the mx5 it seems you have to have the larger pedalboard to engage those. Thanks
That is not correct: the MX5,Pedalboard and Gigboard are equally powerful. Download the rig and try it for yourself.
I really like your patch. Can you make a demo in headrush prime only brother?
I already did. czcams.com/video/p5M1n9t40Ec/video.htmlsi=UmaOspJRz7lTOfY7
Im sorry brother, what I mean is, can you make a video tutorial on how to put your files in the headrush prime and a tutorial on how you apply it to live worship?
Im sorry brother, what I mean is, can you make a video tutorial on how to put your files in the headrush prime and a tutorial on how you apply it to live worship?
Im sorry brother, what I mean is, can you make a video tutorial on how to put your files in the headrush prime and a tutorial on how you apply it to live worship?
Im sorry brother, what I mean is, can you make a video tutorial on how to put your files in the headrush prime and a tutorial on how you apply it to live worship?
Hello sir.. can you share some of your worship rigs and IR thank you so much 😊
Yes, I have already shared all rigs featured in these videos. Look in the DESCRIPTION section, which is directly below each video
Hey sir I’m brand new to Headrush and was wondering how many scenes there is for this rig? As well as do I need to be in a certain mode to click through the scenes?
Welcome to Headrush! This is quite a complicated rig for someone new to Headrush, so I hope it hasn’t discouraged you. It uses 10 scenes (I think). You want to be in STOMP mode
When I go to download what do I need to download exactly? Just the rig file or all the files? Help is much appreciated
This doesn't work for me... WHAT AM I DOING WRONG?!?!
Are these compatible with headrush eleven?
These are not compatible with Avid Eleven Rack
I'm planning on buying a Headrush Pedalboard, is it a good gear even in 2023?
Absolutely. You can’t clone amps, but I’m not currently using that feature anyway
@@forthecreator1Nice! I'm playing mostly worship kind of music, I was worrying about stereo effects and good amp simulation and mods...
Is that a peavey reactor tele you are playing in the video?
Indeed it is! Replaced pickups with Fender Vintage 64, electronics with switch craft and CTS and tuners with locking Sperzel. This is by far my cheapest AND my favorite guitar
@@forthecreator1thanks for the reply!👍😉much appreciated! I have seen one going pretty cheap so maybe ill buy it and do the same. Sounds great!
Hi! I definitely followed every step of the download. However, the IR is still telling me that it is corrupt or missing. Can someone help?
Most likely you have the IR in a different folder from where I did, so Headrush does not know where to find it. You can tap on the IR block and manually find the correct IR. You only need to do this once, after that the Headrush will know where to look
Thx I'll try that. I have been using this rig for a few weeks now for worship with the IR from your previous rig. This rig is a dream! Thanks so much! @@forthecreator1
Which IR are you using for this rig?
I don’t recall the names of the IRs but feel free to use the link in the description to download the rig. The rig will load the correct IRs
Hello friend, in order to download the cool sounds you have for headrush, how much should I pay to your PayPal account? thank you
Thank you so much for considering a donation. The most common donation amount is $20, but any amount (or nothing) is fine
Meu amigo, esses presets podem ser usados na core?
Yes!
@@forthecreator1 Show! Muito obrigado! Vou baixar
Where is the link
In the DESCRIPTION section of video. Scroll up from where you are reading this. You’ll see the title of the video and the word MORE. Click in MORE and you’ll see the download link
So is it normal when im switching scenes that it makes a little buzz.
When switching from the clean scene to dirty: if you have a delay or reverb sustained across the change, the reverb/delay will come out louder during the changeover
@@forthecreator1 Ok thanks. Also for the song Firm Foundation in the intro what scene would i use for that.
For volume swells? Switch the reverb over to the PW SWELLS preset, and turn on both delays. Use the expression pedal to fade in after you hit the strings (do volume swells). I also have this rig you can download: czcams.com/video/U5WuScPHcHc/video.htmlsi=95v4tXj8pk-sSs3U
Download the files again: I have just added a second Rig that has the PW SWELLS reverb on by default. That will make it easier for MX5 and Gigboard users.
Worries me that all the headrush demos are so wet sounding. Are we hiding the core tone of these things?
Funny you say that: My earlier videos are much dryer, but (based on comments section) that was not what people wanted, so I adjusted
Are these stock cabs?
Yes, these IRs come stock in the latest firmware
@@forthecreator1 maybe i have mis seen it but are you using three different amps? I cant seem to do that on my gigboard! Maybe im missing an update? It will only let me have to amps. And how do you save different parameters to different scenes? I have made a scene and want to make another one on the same preset with different amp settings but when i tweak the amp in changes it on both scenes🤷
Yes, Gigboard can run 4 amps in a Rig. If you use the link in the description to download the files, the rig should load up in all 3 amps, all the presets and scenes etc. Were you not able to download the zip file?
Немає в світі такого скасибі яке хочу висловити ! Спасибі !