F-150 Adaptive Cruise Control Install
Vložit
- čas přidán 21. 04. 2024
- You can find the referenced information on Brotato's Lightning forum thread below:
www.f150lightningforum.com/fo...
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
S550 Mustang Digital Dash Install **INTERIOR COMPLETED!**
• S550 Mustang Digital D...
Heads, Cam, and Supercharger Upgrades on my Corvette Z06 **THIS CAM CHOPS HARD**
• Heads, Cam, and Superc...
I Wrapped My Corvette Z06 **BRONZE DISEASE CAMO**
• Video
C7 Corvette Burble Tune **POPS, BANGS, & CRACKS!!!** Deep Dive
• Video
************************************************************
Please SUBSCRIBE!
Follow me to see what I'm up to:
INSTAGRAM: / robshouseofficial
FACEBOOK: / robshouseofficial
RUMBLE: rumble.com/robshouse
ODYSEE: odysee.com/@robshouse:7
Rollers by @sages.media
************************************************************
MUSIC (No Copyright)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Track: Jim Yosef - Moonlight [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Jim Yosef - Moonlight ...
Free Download / Stream: ncs.io/Moonlight
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Track: Diamond Eyes - Stars [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Diamond Eyes - Stars |...
Free Download / Stream: ncs.io/Stars - Auta a dopravní prostředky
I was hoping i could have added it to my xl stx without messing with the factory harness adding pins and wires.... thanks for the guide
Yeah unfortunately you'll need to do that extra step. I believe on that thread people figured out which pinned wires to order from ford. So, you could just buy those, plop them right into the associated pins in the connector, and then you have a bare wire you can solder to once you run a bunch of wire through the firewall and whatnot.
That’s what I’m doing right now… about to hook everything back up and test. Going from ccm to ipma should work. My xlt had the ccm wiring already
@@RobsHouse yes turns out I have the 4 wires in the ipma female side of the harness so I think I’m going to take the ccm plug and wires from new harness and just pin them into existing ipma male side. I’m a little worried about depinning crimping and doing that as it’s my first time
Great info, I just got a 23 lariat and I miss the adaptive cruise from my Yukon. I’m going to do the this on mine.
Awesome! Glad it helps. It shouldn't require additional wiring on the Lariat. It's straight forward. Just take your time when you do the FORScan portion. Make sure you preserve your existing functionality while adding the new functions the guide tells you to add.
@@RobsHouse Hi Rob. When you say "doesn't require extra wiring", you still mean the harness for the bumper is required, right? I have a '24 XLT with the 360 camera, so not sure what will be required. Guess I have to tear into it.
Thanks!
@@wy2sl0 sorry, the bumper harness is always required. The extra wiring is what I mention toward the end of the video. Any trims below the Lariat will need additional wiring from the bumper connector into the IPMI module. The lariat already has this because ACC is offered as an option on the Lariat. So for joshua4411, he will only need the bumper harness. For an XLT, you will need to do some additional wiring as described in the forum thread I linked to. Start around page 3 or 4 and read for that information :)
I need this done to my 23 charger rt.
Do they make this for 17-19 f350?
subscribed!! great explanation and good callout on the CCM IPMA connector. I have a 2023 XLT so I think I'll need the extra wiring. I've read through the different posts on this in various forums and this is the one thing I wasn't clear on. Thank you!!! what tires/lift are you running? That's my next project after adding ACC
Oh wait... I see your other video where you described adding wheels
I appreciate the support! Yeah I think you'll need to do the extra wiring unfortunately. It doesn't look super difficult. Just time consuming removing trim panels and running the wires.
The wheels are American Force DC01 Vibrants. They're 22x12 with a -55 offset. Tires are 33s (Nitto Recon Grapplers). 33x12.5. They fit well, but you do have to trim the pinch weld behind the wheel and a small bit of the front bumper and bumper liner. As for the lift, it's not lifted. It's just the Roush full suspension upgrade which comes preset for a 2 inch front level. So, it's leveled, but not lifted.
Doing this mod on my xlt now and I’ve referred to this video numerous times. Thanks again. I created a pigtail to add into my current harness.. adding crimping pins and hopefully all goes well. Also nice guitar playing …I’ve been in a lot of metal bands over the years (singer and guitarist …\m/
@@johnnyutah8374 I'm glad it helped man! And thanks! I've been playing since I was 10 haha. Music has always been a huge part of my life. Plenty more music content coming too :)
What trim was the ford. I have an XLT 4x4 I’d like to add it to. But not sure if it is capable.
Mine is a Lariat
Any chance you could possibly help me with DTCs that wont clear?
If they won't clear, you probably enabled something that you're not equipped with in FORScan