🌎 Bosch Dishwasher Motor Stuck - Just Hums - EASY FIX ✨
Vložit
- čas přidán 12. 09. 2024
- ✨ Bosch Dishwasher Motor Stuck - Just Hums - EASY FIX ✨
Easy way to remove glass caught in circulation Impeller. Doing this yourself you should save over $200.00.
✨ If the video was helpful, remember to give it a Thumbs Up 👍 and consider Subscribing. New videos every Saturday ✨
-Subscribe Here: / @scottthefixitguychannel
🛠- Do You Need Any Additional Help? Become A Member of Our Channel Today and Get LIVE HELP from Scott With Your Appliance Repair. Pick #1 FIX-IT FAN for Just $4.99 and get Text, Zoom, Email or FaceTime Live Help. Non-Members pay $45.00 for Live Help. Just $4.99 for Channel Members. Click Here to Join Today: / @scottthefixitguychannel
-Facebook: / scottthefixitguy
-Twitter: / scottthefixitgy
-Instagram: / scottthefixitguy
-CZcams Channel: / scottthefixitguychannel
-If My Advice Has Helped You…
Please Click Here To Donate: www.paypal.com...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
-GREAT PLACE TO ORDER O.E.M. Genuine Parts for Your Appliance - Click Here: fix.pxf.io/MmrxYY
-Need Expert Appliance Repair Help Today? Click Here:asqme.com/@sco...
-Good Place to Buy Parts: bit.ly/3wD4L5W
-List of Tools used by Scottthefixitguy: • ✨ Scott The Fix-It Guy...
-Need More Expert Help with Your Repair? Click Here To Schedule a 15 Minute Meeting with Me Using Zoom 💻 : calendly.com/s...
Disclaimer:
Because factors beyond the control of Scottthefixitguy, I cannot guarantee against improper use or unauthorized modifications of this information. Scottthefixitguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Scottthefixitguy recommends safe practices when working on appliances and vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Scottthefixitguy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Scottthefixitguy.
Thank you 😊
PLEASE HELP TO KEEP THIS SERVICE GOING - THANKS SO MUCH😀
www.paypal.com...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
CLICK HERE FOR GREAT DEALS ON APPLIANCE PARTS: bit.ly/3wD4L5W
USE THIS CODE TO GET 10% OFF : M5PV3CLC2X
Please CLICK Here To SUBSCRIBE: / @scottthefixitguychannel
Join Our Channel To Get Access To Perks:😊
/ @scottthefixitguychannel
Check Out Scott’s over 600 Appliance Repair Videos At Our 2nd CHANNEL:
/ @quickandeasy5minuteap...
CHECK OUT OUR NEWEST APPLIANCE REPAIR CHANNEL BY CLICKING HERE: / @fastfreefixes
CLICK HERE TO SEE OUR NEW TESLA 🚘⚡️ CHANNEL:
/ @teslamodel3newowners
NEED MORE EXPERT HELP WITH YOUR REPAIR? CLICK HERE TO SCHEDULE A 30 MINUTE MEETING WITH ME USING FaceTime📲 OR Phone Call☎️ OR Zoom💻 Meeting: calendly.com/s... .
.
CLICK HERE FOR GREAT DEALS ON APPLIANCE PARTS: bit.ly/3wD4L5W
USE THIS CODE TO GET 10% OFF : M5PV3CLC2X .
.
DISCLAIMER: This video or description may contain Amazon affiliate links, which means that if you click on one of the product links and buy the product, I’ll receive a small commission. Thank you for supporting this channel.
Scott The Fix-It Guy *
*
🐔 Check Out Our New Channel Dedicated To Showing How To Raise Your Own Backyard Chickens: / @raisingbackyardchickens ***
***
Scott The Fix-It Guy - Appliance Repair Videos Do you need More Appliance Repair Direct Help from Me? Visit me at:AsqMe.com@ScottTheFixItGu and I'll help you get your appliance working again quickly.
My issue exactly. Was hard to see but your video made me look better. Thank you
Awesome m,
Thank you 😊👍
Huge thanks to you Scott. Even after 3 years of this video, it's helping. I found a piece of plastic and a pistachio pit lodged in the impellar. Your video saved me hundreds of dollars for service call and added a victory to my Do it Myself list.
Great Job Brent😊
Thank you for the video. Although there was no debris in the impeller on my Bosch, I checked the whole area and found that the rubber check valve on the drain side was stuck due to not having used the dishwasher for a while. The symptom was the same as you describe in the video.
Nice job Bruce👍
Thank you so much Scott you just saved us hundreds of dollars in “repairs” and labor. Appreciate it!
Thanks Kurt👍🌲⛄️✨
Thank you! Many hundreds of dollars saved thanks to this video. I used a shop vac to remove whatever was in there, which worked well since my model has a pretty small opening.
I can’t thank you enough. You saved us from throwing away a really expensive dishwasher and also saved us having to buy a new one. We didn’t have a piece of glass stuck but a silicone muffin mould thing. Again, thanks so much.
Thanks so much Ivy👍
Scott - Thank you so much for this really helpful video! I had a piece of plastic blocking the impeller and was able to pull it out using a needle nose plier just like you showed!
I love it😊
Thank you Scott! You probably just saved me a couple hundred bucks! Did what you recommended and indeed found a little piece of clear plastic that must have broken off some dish, removed it and now she's humming again! Merry Christmas!
Thanks for the feedback👍
Thank you! Didn't find anything but I got the impeller moving again. Running fine now. 👏🏼
Thanks Matthew👍
Great video....both impellers should be cleaned with screen and filter off. Recommend wet vac to suck out water, with small hose and nozzle, and use it once any glass or debris is dislodged from impellers. Your pry too
Is perfect for this job! New subscriber!
Thanks so much David😊
Thanks Scott, I did not find anything debris wise, but did spin the impeller about 10 revolutions and cleaned the screens and it works.
How did you spin the impeller? I didn't find any debri and could only move the impeller a little bit with my finger. Think I may make a wire hook similar to a dentist tool?????
one more to the list of those who got their machine running again. damn, as easy as it is. great.
Great job Paul😊😊😊
YOU just made my day. THANK YOU!
Thanks so much👍
When you touch impeller with your finger, should it move freely and easily or be really hard to spin?
It will have magnetic drag for half the rotation and then it will spin easily 😊
Gunna go home and try it,iv been struggling.hopfully it helps out my problem
Thank you so much. This is the same model and exact issue I had!
Thanks Jeff
Meant to say pry off tool/dentist pick, which BTW....i just today used your video to free up my drain pump impeller. Bosch is the best and quietest d/w i have owned, but also one of the MOST expensive. Bosch should design a better filtering method to avoid impeller jamming....should be a 2 stage filter, because as u noted, glass, and debris easily gets under main filter if not seated correctly. Historically i use a compressor fed air gun, after the filter is sprayed w Simple Green to loosen up the filter gunk, then blow it out, rinse Simple Green out w w hot water. Second stage filter , could even be a fine mesh screen in front of pump impellers. The very least w the Bosch hi tech control panel, they should have a sensor in the filter/monthly reminder to clean it. Unless there motive is for users to call a repairman and make revenue on spare parts? Hope not...great brand, but for $$$, they need to protect these plastic impellers from jamming a lot better!!
Hello, HELP i cant get the glass out. How do i solve this problem if i cant get it out?
Your video is super helpful. I recommend them often. Now i have an issue i cant solve 😢
Thanks Nancy,
Can you contact me at: scottthefixitguy@yahoo.com
Hey Scott. After watching your video, I decided to tackle this job. Machine had gotten loud then stopped filling. I just replacing my motor. Upon completion, no water. Valve under sink is on. I heard line to dishwasher pressurize. Powered up and machine control panel lights. Start cycle and hear nice quiet hum, but no water.
Hi Chris, can you send me a video of the first 4 minutes of start up to scottthefixitguy@yahoo.com
I’d like to listen .
Many thanks!
You’re welcome😊
Your video helped define the problem but mine looks totally different in the bottom after the filter is removed there was a mysterious hollow tiny black rubber foot/bumper (?) shaped like the top of a mushroom floating in about 3/16th inch of H2O. The plastic piece on the right front of the filter well is white while a dark gray roughly 1/2 inch tall by aprox 2.5-inch long curved piece fits along the back neither piece responded to wiggling or tugging so I did not try further to remove them. I did find a piece of plastic from the bottom rack of the dishwasher a bracket/guide pivot doohicky for the flip-up dish rack halfway in the outlet. Removing it turned up some stainless steel strands from a scrub pad stuck together with what is apparently Dog hairs... Questioning the Dogs elicited no confessions but testing proved the repair worked. So thank YOU! I don't think a repairman would show up without $$$$$$$ Lucre until after this Covid-19 paranoia. Again thanks Scott for the fix.
Great job Donald👍
I think this may be my problem with our Bosch. It just started today. Fills with water, then doesn't wash. Drains fine if I cancel. I can hear the machine humming. I did find a small piece of broken glass in the bottom of the washer. Removed filters and the little cover in front of the impeller. I can't feel any pieces in there--going to see if my bore scope camera can see anything. One thing, though. I can feel the impeller but it does not spin. Which direction should I be trying to spin it in to get it to move--clockwise or counter? I have a feeling there is something jammed which is why it won't spin . . . hoping I can see what it is and remove it.
Yep,
It’s jammed with that broken wine glass.
The impeller should be able to easily move in either direction.
I hope you can get that glass sliver out.
Maybe your bore scope and needle nose pliers👍
I got cut doing that once (before I watched this video). Live and learn.
Glad it helped😊
Still just humming. Nothing found. Spun both the impeller on right and the little white wheel on left side. Cleaned out water below filters as well. DW is still only humming when turned on. Any other ideas?
Does it let in any water?
The hum might be from the fill valve.
@@ScottTheFixItGuyChannel I am stuck at the same as @kdougery. For me yes it does let in water but we are back at step 1.
The circulation motor in my dishwasher seems to be phasing out. It will stop then I tap it with a wrench and it starts back up. Do they normally phase out like that or something else causing it?
You’re right,
Time for a new motor.
The circulation motor on my beko is going "bump bump bump" and the water is shaking inside. I'm trying to work out if the pump is buggered, but this seems to match my problem!
I have a Bosch dishwasher I ordered a new control module for it and the sanitize and rinse aid refill lights are blinking and won’t let me do anything else does the module need to be programmed
Legend!
Thanks so much
Should I feel anything at all in there??? I can feel something at the end of my finger when I put it in there.
Can you please send that same question to my email at: scottthefixitguy@yahoo.com
This! I feel something like plastic/silicon nipple at the end of the tube. Is that cap of impeller or something else?
Ohh, nvm it was just blade on impeller.
Thanks for the video Scott. I was able to pull out a small piece of plastic. But the motor still hums and won’t move beyond 3 minutes in any cycle. What else could it be?
Thanks Phil,
There’s still something blocking the impeller .
So thinki that's my problem -- not sure what I'm supposed to feel when I put my finger in there though. I am thinking that there's a big piece of glass that might be difficult to dislodge. There are screws around the sump -- can I pull those off to get easier access?
Hi Terry,
Can you send a picture of that to: scottthefixitguy@yahoo.com
can you hook a vacuum up to the hole and suck out debris??
That might work. Just make sure it’s a wet/dry vac.
Use a water vacuum and the pice may come out !!!
My bosch dishwasher is doing the same thing, fills up and when it gets to the wash cycle it doesn't wash, just hums. I checked the filter and even removed the circulation pump from the dishwasher, pulled the cover off and the impeller moves freely. No blockages found, nothing anywhere in the sump housing of the dishwasher. I applied 120 volts to the motor and it just hums like when it was installed. I installed a new pump, same thing. I tried a new control panel with no change. It seems to go through the complete cycle but no washing, you can even hear the soap dispenser open when it should during the wash cycle, heater appears to be working, steamy inside when close to finishing. Any ideas? It is a SHX46A05UC/14
Can you send me an email at scottthefixitguy@yahoo.com so I can give you more detail on the fix?
@@ScottTheFixItGuyChannel Will do! Thank you for the assistance.
Hello, great video!...I have a Maytag Quiet 100 with a similar issue. Fills but then just hums/muffled buzz 3 or 4 times, then shuts off. It drains when I cancel the cycle, but won't run. looked under the unit, but can't see any way to manually turn the impeller...thoughts? Thanks in advance.
Try this video: m.czcams.com/video/Y-fTOnWZi8g/video.html
Scott, I know this is an old video, but could you please, please help me? My Bosch dishwasher was off. All of a sudden by ITSELF, it started making this grinding sound. There were no lights on the panel and I could not get it to shut off. I turned it off at the breaker. Called Bosch, it's 14 months old out of warranty, she basically told me to call the service repair guy. I paid $630 for this machine, have hated it since day one as it does not dry the dishes and always has a musky / moldy spell.
Do you have any suggestions on what's wrong, or should I just throw it out and get a different brand? If so, what brand would you recommend that will actually dry your dishes? Thank you so much for any help.
Hi Debbie,
Some water got into the drip tray underneath the dishwasher and is activated the anti-flood system.
As long as it has power it’ll just keep draining and won’t let any cycle start.
If you remove the bottom panel and unplug it you can use a sponge to remove all of the water in the drip tray and then it will work.
Hi. Thank you for this video. In my case I tested the pump with a voltage meter and it's receiving 120 volts..but the pump makes no noise what so ever and I can put my hand on it and don't feel vibrations of it working or anything... Is this normal or does this mean I have a bad pump? This is my first dishwasher and I brought it used.. I've never heard what a normal drain pump sounds like when it's on.. but mine makes no noise what so ever
Thanks Milton, it is getting voltage👍
I would check to see if something is blocking the impeller from spinning.
@@ScottTheFixItGuyChannel thanks for the reply .i haven't got home to try this but , by looking at a replacement motor online, I just realized that the magnet on my motor is facing the wrong way (not placed so that it will engage the impeller shaft).. I'm guessing a novice tried to do some work on it before and put the magnet back on facing the wrong way.. I'm hoping upon correcting this it will fix my problem .thank you very much!
Hoping you see this. I was cleaning or smelly dishwasher and removed the impeller cover and they sprayed some Dawn dish detergent in. Big mistake. Of course it oversuddsed. Got rid of sudds but now motor hums but no water will come out and start washing. I tried shutting off breaker to reset. No change. The impellers seem to be free, no debris. Was working fine before I tried to clean it. What do I do? Help!
Can you start a cycle and after 5 minutes open the door and pour in 1/2 cup of vinegar to break up the suds. You can just let it run a normal cycle with no soap.
hiI got an issue with Bosch dw, the error code is c4 and was getting to the valve like your next clip but I dont now if my is new or yours but i didnt have any valv ther. Do got an tip i can sendcan picture ?regards Samet
There’s a good chance your fill valve is stuck open and it is flooding your dishwasher .
It’s best to replace that valve.
How did you remove "the little grey cover"?
Just pull it and it comes of easily and then you can just snap it back after your done with the cleanup.
Once I dry everything off and restart the machine it starts filling for a few seconds. Shortly after the tray starts filling up again and it makes a radling noise. First time this happened there was smoke coming out. Wonder if the motor is done. Appreciate any advice!
Don't get that Rolex anywhere near the impeller motor - its highly magnetic.
Thank you, can that hurt a Rolex?