How to Make Real and Powerful Battery, DIY Battery (5 Years Lifespan)
Vložit
- čas přidán 24. 06. 2024
- Diy project, how to make a battery at home, in this video l will show you how to make diy battery, it is long lifespan. #diy, battery, #homemade, #diybattery
How to make battery at home,
How to make diy battery,
How to make powerful battery,
Homemade battery,
Battery,
Aluminum air battery,
Aluminum carbon battery,
Aluminum copper battery,
How to make Aluminum air battery,
make battery,
how to make battery last longer,
how to make battery electrolyte solution,
make a battery pack,
make a battery with salt water,
how to make your own batteries, - Věda a technologie
Awesome build. Simple, cheap and a long lasting. What more could anyone ask for?
Nickel Iron sulfuric: A battery with no electrode deterioration at all. Edison's circa 1900 batteries supposed to still work.
Sodium hydroxide dissolves aluminum and releases hydrogen, and I'm pretty sure Na0H has a similar reaction with copper. By, "5 years lifespan", do you mean when stored before adding the electrolyte? ...Otherwise it seems that the aluminum, (and possibly also the copper), would be dissolved if left sitting in a solution of NaOH on a shelf for a while. Thank you for taking the time to share this. I've always been fascinated with batteries that can be made at home. Robert Murray-Smith also has some very interesting videoS on this subject as well as many other subjects in this field of study.
Thanks brother for your comment. Let me illuminate one point. Until 60 percent sodium hydroxide solution has no considerable effect on copper 👍
I was going to highlight the same point: aluminum dissolves in caustic soda generating gaseous hydrogen and oxygen. They are highly flammable and even explosive. Perhaps it would be possible to use them through a burning valve. In the case of a larger scale, of course.
Could the solution be contained separate from the chemical? Have tab at the bottom that breaks the seal? Flooding the chamber when your read to use it? To extend battery life.
This will be like a sealed pudding can pull the tab, it's filled in! He separated container straight to the bottom.
i wondered this and thought would lead be better
That’s really amazing. Thanks a lot bro.
No problem
I was expecting maybe 1 volt at .250 amp. To get a solid 1.25 volt at more than 1 amp is impressive my friend. I will be building 100, 50 in series, remains in parallel. A very cheap and simple power plant my friend. Thank you for sharing.
They can run indefinitely with a flow of 10-20% NaOH. But when I removed the NaOH the oxidation on the aluminum was such that it would not work again. Yes, the electrolyte turns to sodium carbonate in about 6 hours. Fresh electrolyte will keep it going. But if it dries it didn't work anymore for me. Nice clean work. Thanks!
you could use a baking soda/water mix and clean off the aluminum oxide with some gentle scrubbing before reusing. hope this helps!
Something I've tried that actually seems to work is to rinse the anode with vinegar. It stops the reaction of alkali on the anode. But it must dry completely or be rinsed with water before refilling with electrolyte or else it neutralizes the electrolyte. It does preserve the aluminum.
@@evanriddle1614 I imagine that the vinegar has to sit on it for a while, right? i would think you would need to scrub at least a little, and since the aluminum in this example is so thick i'm not against scrubbing a bit for it to work at full capacity.
@zatnicatienth just contact with the KOH or NaOH neutralizes it. Baking soda is for acid. Vinegar is for alkaline. The vinegar has to dry completely or be flushed out with water. The aluminum can be used again and again. I got 10 hours out of about 2 Sq cm .025" thick for a total of 1.5 ah. 2 hours one day, 5 hours the next day and the rest was consumed in 3 hours final day. About 150 mA
Can you charge the battery
doesn't Lye eat aluminum? I have used it to clean my end mills gummed up with aluminum because i just let the bits sit in the Lye and it then dissolves all the aluminum.
That is cool and doable, now I would be highly interested in how to make a large rechargeable iron oxide battery (55 gallon barrel) that would run 110 volt 10 - 200 amp appliances in case the grid goes out. And how long it could run one 10 amp appliance, then just 50 amp appliances, then the time it would last running 200 amps at once. I know hardly anything about electrical things, so if you make it, a lot of detail and simple instructions. Also, that could be expanded by simply adding more identical units by its' side to double or more how long it held a charge.
Thank you for sharing your knowledge and creativity. Blessings for the Holidays!🙏🙏🙏❤💐
Thank you so much 🙏
I am truly amazed. One amp out of a home made battery with 1,25 volts is a great achievement.
Thanks for sharing, have you thought about doing any experiments with geopolymer mixtures for the purpose of making capacitors?
Not only that but also l have a lot of great ideas and projects. But l am very busy for some personal issues for the time being. I will make videos about those projects soon. Thanks for your comment.
@@joyofelectronics9782 that's awesome I'll stay tuned...just take care of life first. Also when you get the time since I'm no expert take a peek at a palygorskite clay + indigo blue dye mixture. ✌🏾
@@elkanahprivate7954 sure. Take care yourself too.
Thank you , going to try this out . Best wishes, Nico .
Thanks
New subscriber always watching your videos thank you many learnings😊
Thanks brother.
Can you make this battery for 12-volts ? . What about if this battery discharges like other electroite batteries. Can you reharge it and how?.
The electrolyte is an instant charge there is no charging needed this is the beauty...also yes you can series and parralel n step up or down too any volts you require
Very Nice!
I found this video very interesting and informative.
Can this also be made on a larger scale to produce more current?
Also I would like to know why you have 2 holes in the lid of only 1 is needed?
Yes you can make a larger one to get more current. I had two holes to position the aluminum more easily and neatly.
I also wondered why the 2 holes?
It was a fair enough question, also a pretty good answer, cheers.
When I was young a neighbor got a new color tv. When he got it the dealer tossed in a little do -it-yourself Kit for his kids to play with. All his kids were little, so he gave it to me. It was from Burgess battery company, a make - your - own D size batteries kit. It was basically the older way they made D batteries in a kit form, enough stuff to make two.
It used a metal can filled with electrolyte paste and a carbon rod down the center. I used them in a flashlight for quite some time and when they got pretty weak I took them apart, broke down and re-mixed the electrolyte with a little water as it was mostly because of drying out, and packed them back together again to use some more.
Then the electrolyte was getting pretty gnarly so I couldn’t do it a third time.
حقا رائع . يوجد لدي ملاحظة لتكمله مشروعك . يمكنك استبدال الكربون والجرافيت بثاني اكسيد المنغنيز وتخلطة مع الغراء الابيض . سوف تلاحظ ارتفاع الفولت الي 1.85 والامبير اعلي . فهي بطارية غير قابل للشحن . الغريب في هذه البطارية الفولت يبقي ثابت مع الامبير حتي يذوب الالمنيون الي ان ينتهي بالكامل . لاكن احذر الابخرة الناتج عن التفاعل الكميائي .
Thanks a lot bro you are right about what you said👍
Misschien iets voor scootmobiel?
I think the best part of this is the coopper material,
Where did you get it, from NASA? Do they sell coopper?
Well done. Now if I could make a suggestion. If you make this a two chamber battery then you could just tip the electrolite into the other chamber between uses then have it return when needed. That way you will not be continually handling the corosive liquid.
That’s Right but you can’t use the same electrolyte for a long time. You need to use new one bro👍
@@joyofelectronics9782 how long can it last if in use for at least 6 hours daily? Does it matter if not poured out when not in use?
@@nnejiamaechi9385 yes it is need to be poured out. And using 6 hours a day you can use it for about four years if your aluminum is thick enough 👍
@@joyofelectronics9782 Ok. To me it does not matter if I does not last dat long by using it 6hrs a day and did not pouring it out. What I would prefer to do is to change it whenever the electrolyte is weak and it can be determined by the reduced voltage.
@@joyofelectronics9782can you use an automated spray system too keep the electrolyte topped up rather than a soak n toss method...its just a part off my ideas you seem too be on the same thinking as me but yh like a small solar powered electrolyte sprayer that sprays once every 10 minutes forever would that solve this issue maybe with an arundu board and a mechanical trigger off some description...cheers..get back too me if want too bounce ideas
*me: what kind of foil ?*
*joy: cooper foil!*
*me: thanx*
Interesting and educative video.
My question is, will the battery also work fine without the activating conduct materials used? More also, what is it function?
It will work but not as long as the same lifespan.
Creative video, well done, thank you for sharing it with us :)
You’re welcome ☺️
Better to use lead instead aluminium pipe. Because electrolite solution will spoil the aluminium. Electrolite don't have negative effect on lead.
@@jamalfuzail4369 you miss a point. That’s not the case. It’s something different you said.
What would be if one tries with Al(0H)3, Ca(0H)2 ,KOH, Mg(0H)2 as electrolyte dissolved in Organic electrolytic Solvent ???????
ياريت توضيح وشرح مفصل النتائج
Can I use water or the same acid to mix the graffite
But how did youvmake the graphite and carbon mix?
knowing that aluminoum works as an alternative to lead used on lead acid bayyeries is good . Thatmmeans we can replace shrinkin lead plates with aluminium plates on defective lead acid batteries and teyll work better then old days
Is it possible to use another material for electrolyte that is not so corrosive and mix it with some material to make a paste rather than liquid?
Pls can I get heigh voltage by increasing the container and using iron rod for negative and copper/rod for positive instead of allumium and copper sheet
Good idea. Can you list the parts for us?
Hello my friend? You need to post the names of the thing you are using. Because every time you keep saying ( copper foil ) it sounds like your saying ( cooking foil ) and cooking foil would be aluminium foil..... So this is a great video and thank you....
tnx 4 sharing knowledge , how 2 make 12v from it?is it rechargeable?
When you said it last for 5 years, did you mean 5 years in storage or 5 years of continuous use ??
Not both of them. I mean with a normal use the aluminum will deplete after five years. If you use very rarely you can use maybe ten years in storage.
@@joyofelectronics97827:22 Good. Meaning it's not rechargable? What is the Amp? If the size is increased will produce more volts and amps? Can this size run a DC fan or motor ..small size?
@@nnejiamaechi9385 this size of the battery can provide up to 1 amp. l measured and showed in the video anyway. The voltage will be the same when you enlarge the size of the battery but the current will increase. If you want to increase the voltage you can make more than one of this batteries and put them in series (2 batteries = 2.8 volts, 3 batteries = 4.2 Volts)
Couldn’t you switch the materials and get the same result? Like instead of copper foil and aluminum pipe, use aluminum foil and copper pipe?
Yes you can. It doesn’t matter.
@@joyofelectronics9782 ah, thank you! Also, I had another thought about your design. Couldn’t you get more energy out of it if you added more layers of foil/papers in the container?🤔
I's much cheaper the way he did it. Copper is expensive. Aluminum is cheap.
Thanks Bro, the video is really educating but i want to know the substance use as the paste to paint the copper sheet
In this video l told everything in detail: czcams.com/video/dq7tG_2dlg0/video.htmlsi=rd7_p7-evo2NYP8H
To all who may want to create their own battery...
...Be very very careful in doing any of this. Simple carelessness could lead to catastrophic scenarios.
'Catastrophic scenarios'...? Do explain ?
@@jshaw4757 isn't the word catastrophic self explanatory already? If your question is referring to how it may become catastrophic, then I suggest you use your imagination or just dig up some past events that weren't supposed to have happened but did due to some silly careless error, human error. So, its best not to go all out trying to create a battery someone showed randomly on the Internet all for the reason of wanting to save some few bucks while risking own or others' lives or limbs.
Innovation must go on, but not all matured enough to know the difference between need and want.
@@aaronsingh6496 Well I've made countless batterys from many means and the info came from the Internet just like info came from a book one n the same belive it or not books are only wrote by humans and the same info or full book can be bought or read online...and no catastrophic isn't self explanatory it's a perceptional word what is catastrophic too me would be a volcano erupting n killing 1000s off people on the other hand a minor chance off a small shock maybe or a slight burn off some description if you don't pay attention too me is not catastrophic...you can chop a potato n harm yourself if your not careful may even loose a finger but I don't see anybody putting warning signs about chopping fruit...same too be said about purchasing a car I would suggest driving a car is vastly more dangerous too you and others than building a small battery with a volt or so and maybe half an amp or two will do you no harm yet a lack off concentration driving a car can wipe out ten people n ruin ten familys in a second so would you suggest such a catastrophic warning when buying a car ?
So the answer is he doesn't know what could go wrong. He's just a mom saying be careful
@@Michaelsmercedes Fair play nothing wrong with warning people....putting people off from trying seems too happen alot though from certain warnings it's good too warn n advise but I would suggest try not too put people off from trying...and using words like catastrophic in a situation that cannot cause any harm I feel puts people off...cheers
great thanks for useful videos................can I ask about if it is chargeable or not?
No it’s not rechargeable but reusable
great thanks dear sir@@joyofelectronics9782
Dostum tebrikler Elektrolit olarak alüminyumu hidroklorik asitte çözerek hazırlamayı deneyebilirsiniz. Yani şunu demek istiyorum %37lik HCl içerisine HCl tükenene kadar alüminyum çözseniz . Bakır folyonuz sadece akım toplayıcı olarak çalışabilir. Alüminyum iyon batarya yapmış olursunuz sanırım. Alüminyum hava pili yerine. Biraz araştırma yapmıştım alüminyum klorürü üre ile derin öteklit olarak sıvılaştırıyorlar ve elektrolit olarak bu sıvıyı kullanıyorlar. Çalışmalarınızda başarılar dilerim. Vaktim olsa kesinlikle bunu denemek isterim.
Sağol kardeşim bilgi için deneyip sonuçlara bakacağım. Güzel bir çalışma olursa videosunu yaparım. 👍teşekkürler tekrardan.
@@joyofelectronics9782 kardeşim deneme imkanın oldumu acaba? eğer hidroklorik asit kullanmak istemezseniz alüminyum klorürde suda çözünüyor. onu deneseniz çok memnun olurum. birde bakırın yüzeyine sürdüğünüz iletkenin direnç değeri nedir? son olarak yapım videosu varmı acaba?
@@ozgurkaygisiz1562 kardeşim bu aralar o kadar yoğunum ki bu işlere inan ayıracak vaktim olmuyor. En kısa zamanda deneyeceğim ama.
@@joyofelectronics9782 teşekkürler sonucu yorum olarak paylaşırmısınız kolaylıklar dilerim
Pls since i cannot see copper for to use and to which u sugguedted i used lead or stainless stiii. I waam to use lead.please can i coat it with a a mixture of charoal, electrolyte, carbon from finger battery and possibly use leas acid of sudium hydrocide as water
Thank you❤
dostum burdaki alüminyumu demir ile değiştirebilirseniz sanırım elektrolitteki OH iyonları demiri paslandıracak elektrolitteki OH iyonları tükendiğinde ve şarj edildiğinde yüzseydeki pas tekrar OH iyonlarına dönüşecek ve şarj edilebilir bir pile dönüşebilir. Aslında edison piline benzer bir sistem. Sadece nikel yerine siz iletken boyalı bakır folyo kullanmış olacaksınız. Böyle bir 750 w/kg kapasiteli batarya tanıtım videosu izlemiştim.. Deneme imkanınız olurda bilgi verirseniz çok memnun olurum. Kolay gelsin
Çok teşekkür ederim kardeşim. Edison pilini biliyorum ama dediğiniz şekilde denemek aklıma gelmedi. Fırsat bulduğumda deneyip bilgi veririm kardeşim
@@joyofelectronics9782 aslında bu videodaki hazır sistemi dönüştürmeniz çok zor olmaz. En son Fe3o4 ile yaptığınız iletken boyayı biraz kalın bir şekilde alüminyum boru üzerine uygulayabilirseniz bu durumda alüminyum elektrod akım toplayıcı olarak çalışmaya başlayacaktır(bu videodaki bakır elektrodun akım toplayıcı gibi çalıştığı şekilde) . Fe3o4 sudaki OH iyonları ile reaksiyona girip paslanacaktır diye düşünüyorum. Fe3O4 + 8NaOH → Fe(OH)2 + 2Fe(OH)3 + 4Na2O gibi bir elektrolit reaksiyonu gerçekleşecektir. Buda şarj edilebilir bir bataryaya dönüşmesini sağlayacaktır. Eminimki son yaptığınız boya çok düşük bir dirence sahip olduğu için ciddi bir akım oluşacaktır bu dönüşümü sayesinde. Denemeniz için sanırım herşey elinizin altında :) Bilgi verirseniz çok memnun olurum. kolay gelsin kardeşim.
Ayrıca düşündükçe insanın aklına geliyor. Sodyum hidroksit elektrolitin derişimini bu dönüşümde düşürmelisiniz yada Fe3O4 iletken boyayı yeterince kalın uygulamalısınız çünkü demir oksit iletkenin tamamı pasa dönüştüğünde elektrolitte halen OH iyonları olursa bu iyonlar sanırım Alüminyuma da saldırmaya başlayacaktır. Ya OH iyonları tükenmeli yada Kaplama boya yeterince kalın olmalı.
Bu dönüşümün bir diğer avantajı demirin pası elektrolitte çözünmeyecektir. Fakat bu videodaki sistemde yani alüminyumun OH iyonları ile oluşturduğu Sodyum Alüminat elektrolit içerisinde gayet rahat şekilde çözünebilmektedir. Elektrolitin uzun ömürlü olmasıda sağlayabilir.
At least, this works. It's not one more perpetual motion machine, or infinite battery that doesn't work.
Good afternoon,
What is the alternative for the copper foil?
Lead or zinc
@@joyofelectronics9782 Thanks.
One can make enough of these to make 12 Volts. And dry store them in a remote cabin..
At 1.2V you need 10 of them!
And when shyte hits the fan, one can bug out in comfort..
As I have tested larger versions of these, with stainless steel and aluminium.. We got over three years, with a lot of amps..
As in should be able to run one radio and a 12 v LED light strip...
Bigger ones could run a small freezer, to keep your food fresh.
* This consumes the Aluminium, that is the main cost!
Excellent 👍
Would distilled vinegar work?
Yes but not as efficient as sodium hydroxide.
Good luck sir 🎉
Thanks brother
👏
Is that a "copper sheet"? I know you said it many times, but I just couldn't make out what you're saying. I'm assuming it is a small sheet of copper. Is that correct?
Right
What is it that determines the voltage of the battery? Also, what is the capacity of this little unit?
The chemical reaction between aluminum and sodium hydroxide is determine the voltage. If you make it larger you get higher current.
Nice project on home made battery, can we use zinc instead of aluminium?
Yes 👍
@@joyofelectronics9782 can you please tell how did you make Compound paste with Activated charcoal and Graphite, and the Binder.
Make the white tube 2× more length, now the electrolythe is at the bottom, when you want to use the battery, just turn the battery, now the electrolythe is in contact with electrode. Put somes instruction on the tube : on off and " turn the battery to make contact".
Very nice brother but you miss a point. The main idea is not separate the electrolyte from the electrodes, you have to renew the electrolyte time to time. Because after for a while the ability of the electrolyte to deplete aluminum will end up. At this point you have to replace the electrolyte with new one👍
18:00 holy sh*& i thought it was gunna fly awy
What is cooper foil?
copper foil
What is black solution?
Is there any alternative to cooper coil cos I can't see it to buy?
You can use either stainless steel or lead
@@joyofelectronics9782 should I make the lead into square and roll or?
U did not ans? Should the lead be coated too?
@@joyofelectronics9782 I asked if the lead should be coated too
how much time it will run your blender continuously(how much watt of blender), & after fully discharge how much it will take time to recharge again ?
The answers to your all questions are exist in video. But l will explain again: this battery is not a rechargeable battery, l mean you don’t need to charge it. When you put electrolyte it will work. When it has electrolyte it can provide electricity for 6 hours. After 6 hours you have to renew the electrolyte. So it can run the blender for six hours.
@@joyofelectronics9782
He asked the ampere hour capacity of the battery .I am also eger to know it connecting additional cells in parrallel,is it possible to run higher loads?👈
@@harikumar4418 bro the the voltage is 1.25 volts the current is more than 1 amp so the battery can provide this current for six hours. It means the battery has 1x6 = 6Ah. Yes if you make more than one battery of this and connect them in parallel and serial you can handle higher load.
Are u saying at 1,3v with over 1amp it can carry blender and to the extent of 6.hrs
@@joyofelectronics9782 you are good in ansg questions and will increase your followership
Domanda , la catramina che si trova al brico , non va bene ?
looks a lot like the Bagdad , if it made today, with all bit would rotted away over time still intact
Won't d sodium hydroxide destroy the separator?
No
Thank you sir. But one thing l wanted ask is, will the electrolyte flem pressure effects after few hours of chemically reaction inside the plastic container ? 👍👍👍
There is ventile hole on the battery. Probably you missed that part
There is ventile hole on the battery. Probably you missed that part
What's the black stuff po?
Good job my friend, but how much current does this battery output?
I showed in the video. It’s more than 1 amp.
@@joyofelectronics9782 Can the voltage be increased?
Concept of video is amazing but Please Write all materials name used in Project
You have been told about the materials in detail during the video bro.
@@joyofelectronics9782 sorry but I can't hear properly So please its my Humble request
Very cool!!!!!!!!!!!!1
Your videos are quite interesting. I want ask what quantity of water can i put to mix 500grams of sodium hydroxide?😊
Thanks brother. You can put regular potable water.
@@joyofelectronics9782 I mean the quantity like cm or litre
@@nnejiamaechi9385 l wish you said amount of water ☺️it doesn’t matter the solution should be not fully saturated
@@joyofelectronics9782 ok but is l
One litre of water ok or too much for 500grams of sodium hydroxide?
Make one as tall as a lampstand, and put an led lightbulb on top and see how long u can make it light.
When I say led lightbulb, I mean an led lightbulb like u use in ur everyday life, not these tiny lil indicator lights that just happens to be led. If that's what a person thinks of when they hear "led lightbulb" then they don't understand reality.
If one increases all the component sizes by for example 5 times will the voltage still be about 1,25 Volt or will it increase? Thanks.
The voltage will be the same but the current will increase 5 times.
@@joyofelectronics9782 Thank you friend.
How to rechsrge that battery sir?
You don’t have to charge it. When you fill with electrolyte it starts to produce electricity when you empty it it doesn’t produce. That’s all, it’s so simple.
What happen if did not remove electrolite. It will explode or drain?
It will be unreactive after sometime
I would highly recommend a pipe cutter.
Pls what did u pour into the water?
Sodium hydroxide
How many VOLTS and AMPS .. IS there any way to add or decrease the VOLTAGE and the AMPS ??
1 amp 1.3 volts. You can connect in serial or parallel to adjust voltage and current.
Başarılı bir video olmuş devamını dilerim
Sağol kardeşim
Im just curious to ask the commentators here , has anyone done such or in a bigger scale ,, and has it really work ? And how much watts volts generated.
Lighting, it's the key to videos. Omg.
Laser induced graphine
Can we recharge after discharge
No
What happened if you used sulphuric acid
the hydrogen gas needs a vent to escape or else the cell can explode if used for a long time
You are right and l touched on this in the video brother while sealing the battery box
Can you charge this battery? To what capacity?
It’s not required to be charged.
So does it take 12 to make a 12 volt battery?
Yes it is.
Survival emergency power at its best.If you have a place to keep them dry when not in use, these things will last a long, long time
Absolutely
I can't find "Cooper Foil" anywhere.
You can order on internet
What is that, that you mixed
Five years under load or five years on the shelf still good ?! What as a binder ?!!!!
You can use regular white glue
How I corespong with you for u advice to me
What electrolyte you use, water + alcl3 ? , The alcl3 have yellowish like milk, its sign impurity of Iron, I dont think its aluminium will survive in it, i have try 3 week aluminium foil dissolved completlely, and i try ionic urea/alcl3 the aluminium foil not dissolved in 4 month but there are sign of corrode like many small holes, because there a bit water from air (moisture) exist in electrolyte forming HCL, and it corrode aluminium, the solution i think is use high purity aluminium like more than 99.92% and 99.98% electrolyte purity, and free from moisture/water, i guess the impurity will make new side reaction, and the electrolyte must free from water
I used sodium hydroxide. This is a typ of aluminum air battery so it’s normal the electrolyte deplet aluminum, the battery produce electricity via this way. But as the aluminum is very thick it will take very very long time to depleted completely.
Puedes traducir a Español, Spain, 🇪🇸 Gracias
@@maykaGM debes aprender a copiar y pegar un texto en internet y usar el traductor de google
How many amp hours will it produce. Have you done any experiments with it?? I could see several of these together for motorcycle battery
@@drewrinker2071 6Ah with same electrolyte
13:01 you state to only use 1 wire, then proceed to cut to the next clip with two wires soldered together. Whats with that?
The output Of the wire must be one solid one
@@joyofelectronics9782 Thank you, I couldn't get past that part ❤
Are you trolling us with the Cooper foil thing?
Let it be love, what kind of word is that?
1 Amper? NO se mide así.
Does anyone else see why he got those readings?
เอาเสตนเลสได้มั้ย
Is it rechargeable?
It’s reusable
Alt yazı Türkçe seçeneği de olsa idi daha güzel olacaktı.
👍
dostum kolay gelsin bu videondan şöyle birşey aklıma geldi sürekli elektrolit boşaltma gereği kalmayabilir. 500 ml lik iki adet pet şişenin kapaklarını sırt sırta yapıştırsan kapakların ortasınada kısa bir pipet koysan alttaki şişeye bu pili yerleştirsen. Daha sonra üstteki pet şişeyede sıvı yağ koysan. Pil kullanılmadığında pet şişeler ters dönse ve anot ve katot yukarıda kalsa. elektrolit sıvısı sürekli özgül ağırlığından dolayı aşağıdaki pet şişenin içinde kalacaktır. pile ihtiyaç olduğunda anot ve katotun bulunduğu pet şişe aşağıda kalacak şekilde tekrar çevirsen.bu sayede sürekli olarak elektrolit boşaltmak zorunda kalmasan...bilmiyorum anlatabildimmi?
czcams.com/video/Qio_QS7Z_F0/video.html&ab_channel=BasfiileDeneyselBilim bu videodaki gibi. Videodaki başlangıçta mavi sıvı diye anlattığı pet şişenin içerisinde elektrotlar ve elektrolit olsa üstteki petde ise sıvı yağ olsa. Pil kullanılmayacağı zaman ters çevirsek elektrotlar yukarıdaki pet şişenin içerisinde yağın içerisinde kalsa, elektrolit ise ağrılığından dolayı aşağıdaki pet şişede kalsa???
Merhaba kardeşim evet çok iyi anladım ama olay şu ki bu elektrolitin sürekli yenilenmesi gerekiyor, boşaltmaktaki maksat sadece pil çalışmasın diye değil. Çünkü alüminyum eridikçe elektrolitteki sodyum hidroksit tükeniyor ve yeni elektrolit eklemek lazım. Yoksa fikrin harika 👍
@@joyofelectronics9782 bu yolla hızlı şarj olabilen süperkapasitörleri boşalmaması için elektrolit içerisinden çıkartırsak ihtiyaç olduğunda kullanılabileceğini düşünmeye başladım
@@ozgurkaygisiz1562 olmaz o 😀elektrolit olmazsa çalışmaz onlar
@@joyofelectronics9782 hibrit kapasitör videosu izlemiştim çinko sülfat ile yapılan .kendi kendine boşalmaması için bu yöntemi düşünmüştüm
Is it true and useable?😯
aktif karbonu nasıl yapacaz
İnternetten satın alabilirsin. Evde kendi yapman çok zahmetli ve kalitesiz olacaktır.
Idk if u want to make hydrazine for five years Holmes
Doesn’t sodium hydroxide dissolve the aluminum and form hydrogen ?
Yes it is. So that’s why we left a tiny hole on one of the battery pin. So you have to be careful about this produced hydrogen gas.
a hose from this device to a balloon to collect the hydrogen produced would allow you to create more energy
I read through out all the comments to see if someone mentioned this,
surely, the reaction between Aluminum and Sodium hydroxide is very aggressive and used produce hydrogen to be used as fuel, it also creates a lot of pressure inside the cell and with a hole in it can let the electrolyte to spill out and causes damage to its surroundings.
also, the Aluminum electrode will be dissolved very rapidly even if the battery is not in use.
anyway, the instruction were good and maybe using another electrolyte can result in a safer battery.
Regards!