You to call each other what ever you want. It's your channel. If people don't like it turn your volume off if they don't like it! Keep doing what you do. Love the Channel.
It's fitting Putting the International engine in the Ford DT444 is basically a power stroke. FYI 6 plus one, the plus 1 is Low gear Love the show, keep it up.
Absolutely brilliant guys, we love watching you working together. Cory obviously enjoys working for you Hannah, must be the pizza!. Take care great looking truck. Love from the UK.
I call my wife Red and she calls me Older. That’s what it’s been for 48 years and it works for us.🤷🏼♂️♥️👍🏼 Love what you guys do and thanks for sharing. 🙏
Drop that rad, enlarge the opening for the top of the engine, and drop that cab 8" to 10" !! It'll take up the gap between the cab and fuel tank as well as the back. Cut the headache rack down to match, stretch the deck another 6" and voila !! Sexy welding/pulling truck😊
Cory can you flip that front axle to lower the frame some? Also its going to be a lot of work lowering that cab down over that frame but work has never stopped you to get it looking good.
This going to be an incredible swap. Can’t wait to see this one on the road. I love Hanna’s excitement. Y’all are an awesome couple. Keep the vids coming.
I wish they would've had ytube in the early 80s, I could've had over a million subs , I bought a motor home chassis, like a 1and 1/2 ton , 454 , turbo 400 combo , 19.5 tires , put a 1957 chevy cabover body on it and made a car hauler bed assembly for it . Customized the wheel opening on the front , so they didn't look to big for the tires and it was just beautiful . Redid the interior really nice , the outside was original with priner spots and drove it for a couple years to every swap meet around FtWorth , Texas, didn't even have it for sale, but was offered a large profit several times and finally sold it , because the offer was just to much to turn down , should've built many more , I could've sold them all , but life got in the way , and I got lazy .watching yall is inspiring, but at 62 don't know if I still have it in me
Hey Hi again Corey and Hannah from the D Michigan hey the motor city 😅😊 thanks for your time and video on your new project I ❤ appreciate details you add, you make it look easy 😅🎉😊😊
Cool old Ford, from the looks of the slide out mirror frame on the roof, it may be an old mobile home toter that was turned into a welding rig. Whatever its history, look forward to seeing what you guys do with it. Really enjoy the channel, keep up the great work.😎👌👍🇺🇸🤘🔥🔥🔥🔥🔥🔥
The BT466 is one of the best engines International ever built. I would convert the Snap on Truck to that chassis. Seats, I recently bought a set of Mini cooper seats. I am 6-1 & @ 230 not a little guy. The seats fit in my 1950 Ford F1 that has a 5" deep setback on the fire wall. That cabis about 52" wide at the B pillars. Once I removed the in cab fuel tank I fit fine. Check them out for a build as they are really a gerat seat for long distance, and in that wide cab I'll bet you could use an old Coke cooler for a console.
Yes I definitely have to agree with you both on how tall it is for sure!!! I think I would at least get the cab down flush with the top of the frame if possible!! And see what all you would have to move to do so!!! The higher it is the more top heavy you will be also!!! I’m also definitely not a Ford guy what so ever but I do have to say that it definitely isn’t looking to bad at all!!! I think that has to be because of how old of a truck it is!!! You definitely can’t get as cool of a truck today like they was made years and years ago!!!! I definitely love the older trucks for sure!!! You no Cory you should see if you can find one of the really old willys trucks with the big old flat fenders or even the bigger trucks with the flat fenders and build a truck out of one of those really cool trucks!!! You showed a couple of them when you and Hanna went to a salvage yard and they had two or three of them!!! Those trucks are definitely very very very awesome for sure!!! I can’t remember the name of them though??? Awesome video you two and I would definitely say that you both got a bunch done in two days for sure!!!!!
If they hadn't pulled the Hannah Wheats Customs truck out to start with. It might have been the best video that the two of you have made to date. 😅 You two make a great couple, seems you'll do a lot together. Love your videos, I watch every one. 😊
This thing with some of them 46” Michelin military tires would be killer!!! I think they would go good with the lifted, oversized type look it has going for it already?!?! And IMO to add to it even more and really take the “welder rig” theme over the top and finish it off just right y’all could add to it with a sort of a lifted, off-road, Moab, rock crawler kinda vibe. A BAD ASS…. ‘HANNAH WHEAT MOBILE OFF-ROAD WELDING’ 😉 “We can weld where no one else has welded before” ANYWAY IDK JUST A THOUGHT GUYS?!?! Keep up the killer work and I’ll keep watching!!! 👍🏻
Love y'alls sense of humor and engineering skills. So amazing. Looking forward to meeting you both if y'all ever decide to appear at a show in Tx or maybe next year Pigeon Forge. Until then keep the great videos coming.
You two are an amazing couple & team. Hannah is a perfect forklift operator. Can't wait to see this project when it's complete, I don't think pterodactyl would survive in our time I wouldn't WORRY!!! Anyway take care and see you on the next video...
Love that truck but I would have to get everything off that bed. The front half alone is going to look sweet. I’d just make it a flatbed with the side boxes. Way it sits is too busy. Just my preference. Awesome project however you go with it.
On the welder truck, can you mount the fenders further out to cover the wheels? I think it could look cool and should work as the headlamps are on the front panel not the fenders.
You guys are my favorite HOMIES to watch on CZcams! Keep up the good videos!
You two were made to spend your lives together. You compliment each other perfectly. Keep being yourselves and each others Homie.
Thank you so much !!
Hannah , you are one of a kind, you are a treasure to Cory. You two are so good to each other. Keep up the videos!
Oh gah-lee well thank you I definitely got blessed with a man that will put up with me haha
Hannah, that’s gonna be a great new ride!
Cory, you better up your game or Hannah Wheat Customs is gonna be looking for a new fabricator! 😂😂😂
Corey was sooo happy to hear that Hannah would be happy with 3 inches😂😂😂😂
You to call each other what ever you want. It's your channel. If people don't like it turn your volume off if they don't like it! Keep doing what you do. Love the Channel.
This oil rig truck is Kool, looking forward to seeing how it comes put and how much of the original rig you keep
I really enjoyed this video. Love the vision you guys have for older trucks and adding modern drivetrains.
I don't know why, but I really LOVE the fire truck at the beginning of this video.
Gonna be very cool guy's ! Nice little jig Hanna had going on there😊
It's fitting Putting the International engine in the Ford DT444 is basically a power stroke. FYI 6 plus one, the plus 1 is Low gear Love the show, keep it up.
lol but does anyone really use low gear I count reverse as the plus I know that ain’t what it is but I like to think that
How COOL is that truck! Can't wait till next week you guy's!
You guys were grinding hard, that was a huge undertaking for 2 days.
Looking forward to the upcoming episodes.
Absolutely brilliant guys, we love watching you working together. Cory obviously enjoys working for you Hannah, must be the pizza!. Take care great looking truck. Love from the UK.
Thanks!!!
Well Both of you do a great job as husband and wife love all your. U tube channel shows. Keep up the great work 😊👍🙏👀
I call my wife Red and she calls me Older. That’s what it’s been for 48 years and it works for us.🤷🏼♂️♥️👍🏼 Love what you guys do and thanks for sharing. 🙏
I was hoping you guys were going to get to this truck soon. That thing is so freakin cool. Cant wait to see what you guys do with it!
Drop that rad, enlarge the opening for the top of the engine, and drop that cab 8" to 10" !! It'll take up the gap between the cab and fuel tank as well as the back. Cut the headache rack down to match, stretch the deck another 6" and voila !! Sexy welding/pulling truck😊
That was a great video, and I liked how long it was.
Cory can you flip that front axle to lower the frame some? Also its going to be a lot of work lowering that cab down over that frame but work has never stopped you to get it looking good.
I was thinking/planning the same thing
This going to be an incredible swap. Can’t wait to see this one on the road. I love Hanna’s excitement. Y’all are an awesome couple. Keep the vids coming.
Great Team work and Thanx for Sharing your thoughts 👍
Have a Great Day 👍
7 spd. I worked on a bunch of those. Great trucks. I would definitely move that radiator down and lower the cab down at least 10 inches.
You guys are awesome love watching lot's of hard work keep it up and I will keep watching God bless.
Thanks so much!!
Guys you always do such a great job with your videos and they are just super fun to watch
I wish they would've had ytube in the early 80s, I could've had over a million subs , I bought a motor home chassis, like a 1and 1/2 ton , 454 , turbo 400 combo , 19.5 tires , put a 1957 chevy cabover body on it and made a car hauler bed assembly for it . Customized the wheel opening on the front , so they didn't look to big for the tires and it was just beautiful . Redid the interior really nice , the outside was original with priner spots and drove it for a couple years to every swap meet around FtWorth , Texas, didn't even have it for sale, but was offered a large profit several times and finally sold it , because the offer was just to much to turn down , should've built many more , I could've sold them all , but life got in the way , and I got lazy .watching yall is inspiring, but at 62 don't know if I still have it in me
Dang ! Would love to see that !! Thanks for sharing your story!!
It's so cool to see two people doing what they love to do. keep the videos coming😊
Always look forward to your videos ever since I found you guys. I always make time to watch your next adventure, Keep up the great work.
Awesome! Thank you!
I think Hannah has been taking dance lessons from Puddin's Fab Shop.
Haha we should have a dance off!
It’s amazing how small the cab is once y’all got it off and on the ground.
i could watch you guys all day , but i have to work on my Rat ROD
Well I might have to subscribe so I can follow this project. Very interesting 🤔 Content. Thanks 👍 for sharing.
You Guys are off to another adventure...thanks for taking us along
Our pleasure!
Hello guys, I still ❤️ your videos and your pups, keep up the great job Love Jim J&R mobile service and God Bless
great job, your both very hard workers & l always enjoy your videos
Thank you so much!
awesome couple!can't wait ur next vid,avid fan from the Philippines 🇵🇭
I am from Hutchinson, Kansas, I know Salas and his father. I live in Wichita, Kansas now. Good luck with that truck
Thank you!!!
I love N model fords I have one to mine is a 1966 N1000D 220 Cummins 10 speed looking forward to this project
Awesome video you guys are a hoot 😂. Thanks for sharing 👊!
Put air bags on the front axle like they do on peterbilt's & kenworth's, that'll drop it down a few more inches
What we are planning to do also
My favorite TV show by far, hope to meet you sometime.
That old Ford is ultra cool !!!!!
I love watching you guys working together. You look like you have a lot of fun. I love the old Ford, I can’t wait to see it again soon.👍🏻
Hey Hi again Corey and Hannah from the D Michigan hey the motor city 😅😊 thanks for your time and video on your new project I ❤ appreciate details you add, you make it look easy 😅🎉😊😊
Cool old Ford, from the looks of the slide out mirror frame on the roof, it may be an old mobile home toter that was turned into a welding rig. Whatever its history, look forward to seeing what you guys do with it.
Really enjoy the channel, keep up the great work.😎👌👍🇺🇸🤘🔥🔥🔥🔥🔥🔥
Awesome project ✌️ thanks for the video guys🤙
Lookin' forward to this build. I worked for International for 10 yrs and I love any thing International. Gonna be a sweet rig for sure!
Don’t ever get rid of your truck Hannah.That Viking of yours is one of the coolest trucks on CZcams
I am impressed that is going to be one bad to the bone truck. Hannah will be jamming the gears soon, areal trucker.
The BT466 is one of the best engines International ever built. I would convert the Snap on Truck to that chassis. Seats, I recently bought a set of Mini cooper seats. I am 6-1 & @ 230 not a little guy. The seats fit in my 1950 Ford F1 that has a 5" deep setback on the fire wall. That cabis about 52" wide at the B pillars. Once I removed the in cab fuel tank I fit fine. Check them out for a build as they are really a gerat seat for long distance, and in that wide cab I'll bet you could use an old Coke cooler for a console.
Great start looking good
Lovin the build.
Thanks for sharing with us.
Thats a solid drive train you're using , going to be awesome 👌
Glad i found you guys. Good stuff
Excited about the weldin truck! Gonna be awesome when y’all get it rollin!
You are both cool! Awesome collection you guys are building.
Yes I definitely have to agree with you both on how tall it is for sure!!! I think I would at least get the cab down flush with the top of the frame if possible!! And see what all you would have to move to do so!!! The higher it is the more top heavy you will be also!!! I’m also definitely not a Ford guy what so ever but I do have to say that it definitely isn’t looking to bad at all!!! I think that has to be because of how old of a truck it is!!! You definitely can’t get as cool of a truck today like they was made years and years ago!!!! I definitely love the older trucks for sure!!! You no Cory you should see if you can find one of the really old willys trucks with the big old flat fenders or even the bigger trucks with the flat fenders and build a truck out of one of those really cool trucks!!! You showed a couple of them when you and Hanna went to a salvage yard and they had two or three of them!!! Those trucks are definitely very very very awesome for sure!!! I can’t remember the name of them though??? Awesome video you two and I would definitely say that you both got a bunch done in two days for sure!!!!!
That ol squarebody looks like my old one. Your build looking good!
If they hadn't pulled the Hannah Wheats Customs truck out to start with. It might have been the best video that the two of you have made to date. 😅 You two make a great couple, seems you'll do a lot together. Love your videos, I watch every one. 😊
Awesome adventure as always brother and little sister so much action lol !!!!
My grandpa always said not to eat those persimmons unless the frost hit them
Great… well I’m still alive 😅😅😅
the bumper and grill on the Welder Truck is priceless
This thing with some of them 46” Michelin military tires would be killer!!! I think they would go good with the lifted, oversized type look it has going for it already?!?!
And IMO to add to it even more and really take the “welder rig” theme over the top and finish it off just right y’all could add to it with a sort of a lifted, off-road, Moab, rock crawler kinda vibe.
A BAD ASS….
‘HANNAH WHEAT MOBILE OFF-ROAD WELDING’ 😉
“We can weld where no one else has welded before”
ANYWAY IDK JUST A THOUGHT GUYS?!?!
Keep up the killer work and I’ll keep watching!!! 👍🏻
Love y'alls sense of humor and engineering skills. So amazing. Looking forward to meeting you both if y'all ever decide to appear at a show in Tx or maybe next year Pigeon Forge. Until then keep the great videos coming.
I think y'all calling each other homie is hilarious. Keep up the good work
Great job guys, looks like Hannah Wheat Customs is already in a halfway.😀 Looking forward for the next "episode"!👍
You two are adorable. I love the way you two work together. Nothing wrong with being homies
Enjoy your projects and vison of revamping old trucks, My wife and i watch together, Talk to your dogs more they feel left out, lol
You two are perfect for each other I love how you both pick at each other what a blessing you both are to each other 😊😊
Can you move the axle on top of the leaf springs to help fill the gaps? Great Progress🏁
You two are an amazing couple & team. Hannah is a perfect forklift operator. Can't wait to see this project when it's complete, I don't think pterodactyl would survive in our time I wouldn't WORRY!!! Anyway take care and see you on the next video...
That truck is going to be bad ass!! Love it
Great work!
Its gona be awsome! 😃👍
Yep....this will be an awesome build.....as usual! Can not wait to see what twists Hannah comes up with!!
Looks great so far nice job you guys and girl 😮😎🤪🙏
Gather all those up, get in the house, and make some persimmon cookies asap.
People just can't let you be yourself. Don't let people tell you how to be. I love your personalities! It's your show!❤
Keep up the great content that's a TUFF LilUnit😊
I got your fudge round joke Cory. Wonder how many people did. 😂
Love that truck but I would have to get everything off that bed. The front half alone is going to look sweet. I’d just make it a flatbed with the side boxes. Way it sits is too busy. Just my preference. Awesome project however you go with it.
Your videos are very entertaining. You two are an amazing couple
Looks like a great project. Just found y’all. See if we can keep up.
On the welder truck, can you mount the fenders further out to cover the wheels? I think it could look cool and should work as the headlamps are on the front panel not the fenders.
Hannah,you need to take the long tubes that you mentioned about sign posts for exhaust stacks.
Beautiful 😍
I loved Corys nick name for you Hannah , [ SHORY BOTTOM ] 🤣🤣🤣🤣 1st time watching great video
You need a dumpster on site just for cleaning out trucks!
Go Hannah!
Price of the truck - $1,500
Price of the body swap ?
Look on Hannah Indiana's face priceless.
Gonna be a schaweet ride
Geezous Cory, you couldn't have a larger disc for that death wheel...lol
I’ve gotta good friend that was from abbyville. He said Robert was a great guy
Ya'll should call the truck Buford lol Big Ugly ford😂 gonna be a sweet ride when yall are done!
Very Cool Truck
Yall are doing a great job homies
exited about the welding/oil truck have fun ...............
Throw the flaming accelerator pedal by the propane tank... PERFECT LOL
Guys as always another awesome video really enjoy watching a man thanks y'all there great videos
Awesome thank you!
Round goggles are for torch work you can get all the replacement parts at any welding supply store.
eric from off road recovery calls his Shorty, SEAT COVER!!!!
Well I like it tall remember that is a road tractor frame hang in there and make it work thanks for the video
Of all your projects, I like Hannah's viking best, I was manufactured the same year : )
How about C&H Customs?