Video není dostupné.
Omlouváme se.
How to make 5V 25W soldering iron at home/Aamar Tech/amazing diy easy project idea/USB solder iron
Vložit
- čas přidán 2. 07. 2021
- How to make 5V 25W soldering iron at home/Aamar Tech/Amazing diy project idea/Handmade easy/AC/DC/Soldering iron/Soldering machine /100% Working/school project/nicromewire/heater coil/usb soldering iron.
#aamartech #diy #soldering #solderingiron
#2020 #2021 #how #howto #amazing
#handmade #handmade #new #ideas
#heating #useful
Visit to my channel: / @aamartech01
Please like, comment and SUBSCRIBE my channel.
************** Thanks for watching *************
Hebby
very nice
Good video
Nice video 👍👍
Wonderful
10 swg copper wire how to get
You have to apply tin on all the usable tip area before the cupper oxidize, because it don't get solder when oxidized, and has to grain to clean the cupper and do the right thing, only a small part of the tip has tin.
Bhai mera pass tu 10swg wla wire nahi hai
What is power supply
220V AC ?
Used 220v to 5.2v stepdown transformer. Thank you.
@@AamarTech01 5.2v 10-20A Transformer 😄
Nice video
#25wat
#Elemenent_setrika
#Cosmos
Fues wire kaha se milega
Can I use adaptor 12 volt output?
It's dosent work
When it hot produce too much smoke
Very very very bad iron👎👎👎👎👎👎
Produce smoke is normal on any iron when using for first time, you need use proper isulating material to this work, I have my own 5V 20W made of cupper cable, a wooden cable, a insulation of Kapton tape, this tape can deteriorate after a long time, but when it happen, the resistor area is oxidized and don't conduct anymore, don't happening a short circuit, and I've use a pen spring as a heating element.
I made another 12V using mica as insulator and part of a 1000W 120V resistor as heating element, when well done works, and I even have an original Hikari power 50+ iron.
I've put an epoxi mass to hold the cupper wire on the wooden cable, the cable is weak to hold the heat without enlarge due heat.
I have a PSU and a transformer.