Thanks Greg, I just got a 14 SUV and in the process of setting it up. I had previously seen your video and was remembered that there was some adjustments underneath the table to get the blade completely square. Thanks again for the great tips.
Thanks, I have seen this almost 2 years ago when I got my 18BX and set it up, now I am calibrating again and it seems unbelievable that there is not any other source to how to calibrate the front/back tilt, just THIS video..thanks for that, it took me a while to find it, I will now make sure it is bookmarked. Not even Laguna official videos show how to calibrate that, just right/left. Thanks again.
Good info on table setup but did not check if all four trunnions were precision ground into the exact same plane. In other YT videos at least one of the four trunnions were not in the same plane and/or were poorly finished, requiring trunnion casting replacement. And, wheel runout is not checked. In other YT videos the lower 18BX wheel had excess runout and vibrated requiring replacement of the entire assembly. No safety support when table tilted.
Good video. I'm going to look at one of these today. Lightly used. I've been wanting a large band saw for quite some time. The tips on doing the adjustments are priceless. This is very good information for anyone that has one of these machines.
Hi Greg, I bought my 18BX right after your first video getting mine mid december. I didnt have a single one of your issues and after dialing it in ...wow. Impressive how well it cuts logs! I built my own outfeed table for those longer logs. Table alignment was puzzling at first but you found the same allen screws I did. Keep up the great videos.
Thanks Duane, once I got it dialed in I had a similar reaction. What really encourages me about your commet is that you had no problems. I like to think that maybe they got a handle on their quality control. Thanks for your encouragement, more videos are coming. I built a gantry to handle the bigger logs, amongst other things. Enjoy your saw!
I too was in the market for a bandsaw. After watching your videos, the BX18 was ordered along with the carbon toothed 1" blade (and others). Seems this saw does 98% of what's needed. The other saws would be 75-80%, always just a bit short of required. Thanks for the tips.
Greg...your video comes as I try to decide on a new bandsaw. I was looking at this model and had made the decision to purchas the 18BX. Unfortunatley, I caught a bug that was going around and ended up watching videos on the Laguna instead of concluding the deal. SO knowing what you know now, would you recommend this saw? If not what would you recommend? If I am paying for a Mercedes, I don't expect to have to go through the hoops you went through. I live in Maple Ontario, just up the road from you...if you use the 407 I guess. So please let me know your thoughts. Who would you recommend as a dealer?
Awesome video I appreciate the information random question how tall are you I’m looking at same bandsaw trying figure will fit in my shed it’s on slab of cement with a 2x4 bottom I still keep on it because of Field mice
Thanks for the great tips. I noticed the miter slot on my saw isn't parallel to the blade, and I was wondering how to adjust for that? Also, if your table isn't square to the back of the blade, what kind of cut problems would that cause?
Hi Jason, it's a bit complicated to explain. You have to get access to the bolts on the casting where the trunnion sits. It requires removing and reinstalling the table a few times to get it right. Both problems can be resolved when doing this. I also reached out to my Laguna rep regarding this issue, and he was kind enough to offer to walk you through it. He asked me to have you reach out to him through text, and to set up a call to fix your problem. Just make sure that when you have the call, your table is removed to start the process. Good luck.
@@wood4thoughtbygreg526 great, thank you very much! I’ve written down his number in case you want to remove it from the comment. I’ll try giving him a call next week after I’ve had a chance to disassemble it this weekend. I also have questions for him about how to align the fence to the blade because every time I tighten the bolts it jumps from where I had it set.
Hey, thanks for this video. I’m deep in the middle of research on a new bandsaw. I’ve heard the blade guides can come loose on the laguna bx saws, have you had this issue? How do you like the guides having had the saw for so long? Thanks again
Hi Jason ,yes they can come loose. I just make sure I really tighten them down before using it and recheck once in a while. I do however like them, especialy when I compare them to my 14''.
Hi Patrick ; the short answer would be yes , after working out the bugs I find myself falling in love with this machine all over again. I hope this helps and let me know what you decide on. If you have a chance check out my website wood4thought.com. (I'm slowly building content as I work full time and I'm new to this.) Greg
I would buy again, the saw performs excellent as it was expected once the problems were fixed. I was so happy with it ; I decided to buy their jointer and planer. That being said it helped to have the support from the laguna sales rep . That alone gave me the confidece knowing he had my back because I still was unsure about their customer service dept. I hope this helps .
I’d like to get this but have one question about lower guides. One reviewer was very critical of access to those guides. I have that problem now with my jet which is why I’m getting rid of it. Thanks
Hi Paul ; the commet from the other reveier is right, my big mitts have a hard time getting in there.The trunnions are in the way and the knob for the back cooling block can be used on the outside. However, if you need to tilt the table you then have to screw it to the other side. I would go to the vendor that you are considering and have a closer look. As for me, it's a bit of an inconvenience, and it did seem like an after thought. However I am still very happy with the performance of it. I hope this helps and let me know how it turns out for you.
@@wood4thoughtbygreg526 thanks for your insight. I’m going to pass on the Laguna and keep looking. Sadly it seems everyone of the saws on the market today are made in China and the quality control isn’t great.
Wayne, I reached out to my rep. He asked me to get your info and he will see if you are in their system...if you are Canadian, he'll contact you...if you are American he'll pass your name along to the US guys. If you are comfortable with this arrangement, send me your info to w4tbygreg@gmail.com.
I first loosen all the knobs and take out the insert. I then position the guide blocks where they need to be and pinch in against the blade, while turning the wheel. With one hand holding the blocks in place, I then tighten the knobs. Hope this helps.
I do agree, not the best video, I was quite nervous taking it. The majority did find it helpful and at this time there is no point in remaking it. Some people will still benefit from it as is.
The quality of the machine and its performance is too poor. After sales support is also very bad. All machines are made in Taiwan or China. So our strong recommendation is not to buy any machine from Laguna Tools.
Thanks Greg, I just got a 14 SUV and in the process of setting it up. I had previously seen your video and was remembered that there was some adjustments underneath the table to get the blade completely square. Thanks again for the great tips.
Thanks, I have seen this almost 2 years ago when I got my 18BX and set it up, now I am calibrating again and it seems unbelievable that there is not any other source to how to calibrate the front/back tilt, just THIS video..thanks for that, it took me a while to find it, I will now make sure it is bookmarked. Not even Laguna official videos show how to calibrate that, just right/left. Thanks again.
Glad it was helpful. This is why I have left this video up for so long , hoping it would help pepole.
Good info on table setup but did not check if all four trunnions were precision ground into the exact same plane. In other YT videos at least one of the four trunnions were not in the same plane and/or were poorly finished, requiring trunnion casting replacement. And, wheel runout is not checked. In other YT videos the lower 18BX wheel had excess runout and vibrated requiring replacement of the entire assembly. No safety support when table tilted.
I’m ordering my 18BX soon! Thank you for this video and showing how to set it up.
Glad it was helpful!
Good video. I'm going to look at one of these today. Lightly used. I've been wanting a large band saw for quite some time. The tips on doing the adjustments are priceless. This is very good information for anyone that has one of these machines.
Thanks. It's feedback like this makes me consider to do more videos to help fellow woodworkers.
Hi Greg, I bought my 18BX right after your first video getting mine mid december. I didnt have a single one of your issues and after dialing it in ...wow. Impressive how well it cuts logs! I built my own outfeed table for those longer logs.
Table alignment was puzzling at first but you found the same allen screws I did. Keep up the great videos.
Thanks Duane, once I got it dialed in I had a similar reaction. What really encourages me about your commet is that you had no problems. I like to think that maybe they got a handle on their quality control.
Thanks for your encouragement, more videos are coming. I built a gantry to handle the bigger logs, amongst other things.
Enjoy your saw!
Thanks Duane. I am glad things are working out for you. I, too, like the saw now, and thinking about doing a short video update with a jig I made.
Wow really nice video and a really clean shop.
I too was in the market for a bandsaw. After watching your videos, the BX18 was ordered along with the carbon toothed 1" blade (and others). Seems this saw does 98% of what's needed. The other saws would be 75-80%, always just a bit short of required. Thanks for the tips.
Very good Video,Thanks
Greg...your video comes as I try to decide on a new bandsaw. I was looking at this model and had made the decision to purchas the 18BX. Unfortunatley, I caught a bug that was going around and ended up watching videos on the Laguna instead of concluding the deal. SO knowing what you know now, would you recommend this saw? If not what would you recommend? If I am paying for a Mercedes, I don't expect to have to go through the hoops you went through. I live in Maple Ontario, just up the road from you...if you use the 407 I guess. So please let me know your thoughts. Who would you recommend as a dealer?
Awesome video I appreciate the information random question how tall are you I’m looking at same bandsaw trying figure will fit in my shed it’s on slab of cement with a 2x4 bottom I still keep on it because of Field mice
I'm glad you are able to get something out of it , I'm 6' .
Thanks for the great tips. I noticed the miter slot on my saw isn't parallel to the blade, and I was wondering how to adjust for that? Also, if your table isn't square to the back of the blade, what kind of cut problems would that cause?
Hi Jason, it's a bit complicated to explain. You have to get access to the bolts on the casting where the trunnion sits. It requires removing and reinstalling the table a few times to get it right. Both problems can be resolved when doing this. I also reached out to my Laguna rep regarding this issue, and he was kind enough to offer to walk you through it. He asked me to have you reach out to him through text, and to set up a call to fix your problem. Just make sure that when you have the call, your table is removed to start the process. Good luck.
@@wood4thoughtbygreg526 great, thank you very much! I’ve written down his number in case you want to remove it from the comment. I’ll try giving him a call next week after I’ve had a chance to disassemble it this weekend. I also have questions for him about how to align the fence to the blade because every time I tighten the bolts it jumps from where I had it set.
Hey, thanks for this video. I’m deep in the middle of research on a new bandsaw. I’ve heard the blade guides can come loose on the laguna bx saws, have you had this issue? How do you like the guides having had the saw for so long? Thanks again
Hi Jason ,yes they can come loose. I just make sure I really tighten them down before using it and recheck once in a while. I do however like them, especialy when I compare them to my 14''.
@@wood4thoughtbygreg526 thanks a lot Greg. Sounds like it’s not too much trouble having them come loose. Thanks again for all the info
So do you still recommend this machine? I am about to buy a new saw for the shop
Hi Patrick ; the short answer would be yes , after working out the bugs I find myself falling in love with this machine all over again. I hope this helps and let me know what you decide on. If you have a chance check out my website wood4thought.com. (I'm slowly building content as I work full time and I'm new to this.)
Greg
I was considering one of these 18 BX’s and wonder what your thoughts are after a fair amount of time? Any long term thoughts?
I would buy again, the saw performs excellent as it was expected once the problems were fixed. I was so happy with it ; I decided to buy their jointer and planer. That being said it helped to have the support from the laguna sales rep . That alone gave me the confidece knowing he had my back because I still was unsure about their customer service dept. I hope this helps .
@@wood4thoughtbygreg526 Thank you, yes it does!
I’d like to get this but have one question about lower guides. One reviewer was very critical of access to those guides. I have that problem now with my jet which is why I’m getting rid of it. Thanks
Hi Paul ; the commet from the other reveier is right, my big mitts have a hard time getting in there.The trunnions are in the way and the knob for the back cooling block can be used on the outside. However, if you need to tilt the table you then have to screw it to the other side. I would go to the vendor that you are considering and have a closer look. As for me, it's a bit of an inconvenience, and it did seem like an after thought. However I am still very happy with the performance of it. I hope this helps and let me know how it turns out for you.
@@wood4thoughtbygreg526 thanks for your insight. I’m going to pass on the Laguna and keep looking. Sadly it seems everyone of the saws on the market today are made in China and the quality control isn’t great.
How did you get a Laguna rep to come to your shop? I've got a problem with mine right out of the box, I have to call and email them for help.
Wayne, I reached out to my rep. He asked me to get your info and he will see if you are in their system...if you are Canadian, he'll contact you...if you are American he'll pass your name along to the US guys. If you are comfortable with this arrangement, send me your info to w4tbygreg@gmail.com.
I just bought one so this was very informative. Now please pet the dog.
How are you adjusting the bottom guides? I have an 18bx and having trouble.
I first loosen all the knobs and take out the insert. I then position the guide blocks where they need to be and pinch in against the blade, while turning the wheel. With one hand holding the blocks in place, I then tighten the knobs. Hope this helps.
Man dude, take this freak’n video off and remake it. Gosh!
I do agree, not the best video, I was quite nervous taking it. The majority did find it helpful and at this time there is no point in remaking it. Some people will still benefit from it as is.
The quality of the machine and its performance is too poor. After sales support is also very bad. All machines are made in Taiwan or China. So our strong recommendation is not to buy any machine from Laguna Tools.
"Our" and just who the heck are you?