I've seen these take on some seriously gnarly trails with no more than a couple of inches of lift and decent tyres, they are a super capable little 4x4, even as standard, definitely wouldn't call them a "soft roader".
I just bought mine A week ago. Im pretty stoked on building it up a little. Not lifting yet, im going to start with a cold air intake rather than a snorkel, then tires, then lift, then after that the sky is the limit.
I built a similar GV for my Baja car. Look out for the stock plastic air intake snorkel that fits over the intake manifold and to the throttle body. Mine rotted away underneath which I would never had seen if I had not been searching for a coolant leak. It was sucking in raw dirty air and completely bypassing the air filter box. It was those damn little rubber hoses that go to the front of each head that were cracked and leaking coolant onto the valley of the V-6.
Wow I got a 2000 Vitara 2.0 5-door I just ordered the street Rays 2 inch kit in the mail it'll be here Tuesday got a samurai shifter cuz mine's a 5-speed waiting on some 2-in wheel spacers found an actual fitted raised intake waiting for these things to come in the mail in the next 2 to 3 days I'm here in southern Oregon and I come across your video spectacular
Don’t expect great mileage from these. It’s definitely better than your van, but the v6 model wasn’t really the most efficient vehicle. Lots of good information for these on Suzuki forums though. But I’d suggest stocking up on parts if you ever come across wrecked ones, or see them at scrapper.
I have a 2002 grand Vitara and can say from experience that even stock it’s a competent vehicle for forest roads in the winter. I love breaking fresh snow with it on the forest roads. It struggles a bit in icy conditions off road, but as long as you’ve got snow or mud instead of ice under the tires you really can’t stop the thing unless you totally high center it
👍🏻We had a 2003 4x4 Tracker, then an AWD Forester, and then an AWD CRV. No contest, IMO. When the going gets tough, I want a Tracker/Vitara. I'm looking for 5spd.. 🤞🏼
I have a 1999 Chevy tracker 120k mileage 5 speed in Florida USA in excellent working order. Just drove it to NY and back. I'm considering selling it ;)
Hey @DonnieDispersed those little notched areas on the intake is that to release debris before it gets to the airfilter? If not look into a Snorkel Head Cyclonic Pre Cleaner (round ones). Amazon has em $30 & up. Toughest part might be finding the right size. Too big it won't clean like it should & too small will restrict the airflow too much & starve the engine of air. Looking forward to seeing what you do next.
Looking forward to a long term review & what the air filter looks like since you put it on @@DonnieDispersed. Save the old filter for a comparison if you could.
I have an 03 tracker added the 2 in spacer can anyone help on wht shocks to get to help get a smoother ride.like wht other year of vehicles have the same front and rear shocks 2inches longer for a 03 tracker 2inch spacer lift
You said the shocks are for a 2wd toyota tacoma what year? the the KYB 554350 you linked in the description are listed as rear shocks for the 4x4 tacoma
I confirmed the ones I linked are the ones I used. When I referenced the part number online I believe it said it fit the Tacoma Pre-Runner which is why I said 2wd but it makes sense that it would fit the 4x4 and the prerunner.
i have a suzuki grand vitara 2004 and it has almost 400k kilometers, would it be worth it to put a snorkel and lift on it? i dont wanna spend the money for it to die a month or 2 later
So what was the idea behind the manual hubs? These rigs don’t engage the front diff at the hubs, but rather in the differential itself. I suppose disconnecting the hubs from the driveshafts would provide a tiny mpg improvement?
Did you have to remove the rear bump stops to get the spacer on? We have the same lift and it won’t sip on over the bump stop. We can’t get the bump stop off.
Hey brother. I’m just curious if you kept the same original front shocks and just added The lifting kit. I just bought an manual, v6, 4x4 and I’m thinking to work on it.
Thanks for the video. What part of the wheel spacer did you try machining? I’m contemplating doing this as well but with the G1 Tracker hub which might be a smaller area. Looking for specifics of what you tried exactly and where it failed. Can I buy your other two that are still good?
@DonnieDispersed thnk u for the reply I added the spacer lift on my 03 tracker now it rides rough. So I wasn't sure wht shocks to get tht would make it run smoother
@DonnieDispersed thnk u so much I been looking for information on wht shocks to use with the spacer lift couldn't find anything . Thnk u so much for the reply
*BUILD LIST
Hubs: Warn Manual Hubs amzn.to/34SVeju
Lift: 2" Street Rays Lift Kit ebay
Camber Bolts: Moog K90473 amzn.to/3u69Iou
Tacoma Shocks : amzn.to/3CLxavg
Tires: BFG Trail Terrain T/A 225/75/16
Lights : Nilight 6.5" Amber Bars amzn.to/3u0burr
Light Bar Mount: amzn.to/3MTZdNR
Snorkel: Tema 4x4 on ebay
*Extras
Nissan Gasket Maker: amzn.to/3CMvm5l
Electrical
Insulated Double Wire: amzn.to/3ocR4cT
Favorite B/R 16ga Wire: amzn.to/3llYtVB
Heat Shrink Connectors: amzn.to/31eI5Pr
Awesome HeatShrink Tubing: amzn.to/3dg43nL
LED Rocker Switches: amzn.to/3ibOUq3
Social Media Links
www.donniedispersed.com
IG instagram.com/donnie_dispersed/
TikTok www.tiktok.com/@donniedispersed
*Purchases through these affiliate links support the channel at no added cost to you!
I've seen these take on some seriously gnarly trails with no more than a couple of inches of lift and decent tyres, they are a super capable little 4x4, even as standard, definitely wouldn't call them a "soft roader".
Was literally just wondering about a taller shock thank you for the parts list
I just bought mine A week ago. Im pretty stoked on building it up a little. Not lifting yet, im going to start with a cold air intake rather than a snorkel, then tires, then lift, then after that the sky is the limit.
I built a similar GV for my Baja car. Look out for the stock plastic air intake snorkel that fits over the intake manifold and to the throttle body. Mine rotted away underneath which I would never had seen if I had not been searching for a coolant leak. It was sucking in raw dirty air and completely bypassing the air filter box. It was those damn little rubber hoses that go to the front of each head that were cracked and leaking coolant onto the valley of the V-6.
Thx for vid, GV is a under rated offroader. 👌
Excellent video! Liked the explanations a lot
Love this mate👍
Nice job on the upgrades bro! Under budget and more off-road ready for sure
I've been wanting one of these for over a year, finally got a better job, starting to save
My first time off roading was in a built Vitara and it was a blast!
Great narration! Awesome detail
Video very good!
hugs from Brazil
That's a nice little build
Hi from Oregon❤
I have a 2004 grand vitara
Great video
Wow I got a 2000 Vitara 2.0 5-door I just ordered the street Rays 2 inch kit in the mail it'll be here Tuesday got a samurai shifter cuz mine's a 5-speed waiting on some 2-in wheel spacers found an actual fitted raised intake waiting for these things to come in the mail in the next 2 to 3 days I'm here in southern Oregon and I come across your video spectacular
Great video! I like those little Zuk's.
Thanks! They’re fun little rigs, this is my second one 👍
I have a 2003 xl7 and i've done almost the same mods, 2inch lift, 32s, lights and a roof rack. They are great little offroaders
same here, 4 inch lift, 31.5's, front winch bar. fun as hell!
I have an XL7. Looking for the manual hubs
@@edtaylor3409 they are compatable with the ones that fits vitaras/trackers and samurais. the ones that i used came from a 91 vitara
I have a 2001 GV I'm looking to upgrade. Did you need to change the shocks to accommodate the 2" lift or did you stick with stock?
@@1ring2rule3pigs i used the same shocks but i had to make an extension to be able to use them
Love it I built a 2000 GV
Don’t expect great mileage from these. It’s definitely better than your van, but the v6 model wasn’t really the most efficient vehicle. Lots of good information for these on Suzuki forums though. But I’d suggest stocking up on parts if you ever come across wrecked ones, or see them at scrapper.
What about the 4 cylinder?
I just picked up a 02 tracker i plan on doing some of these mods i already put 30x9.50r15 tires on it
Best for offrood jeep I have
I have a 2002 grand Vitara and can say from experience that even stock it’s a competent vehicle for forest roads in the winter. I love breaking fresh snow with it on the forest roads. It struggles a bit in icy conditions off road, but as long as you’ve got snow or mud instead of ice under the tires you really can’t stop the thing unless you totally high center it
👍🏻We had a 2003 4x4 Tracker, then an AWD Forester, and then an AWD CRV. No contest, IMO. When the going gets tough, I want a Tracker/Vitara. I'm looking for 5spd.. 🤞🏼
I have a 1999 Chevy tracker 120k mileage 5 speed in Florida USA in excellent working order. Just drove it to NY and back. I'm considering selling it ;)
Nice.
nice video thanks ,,, i have a ? will the wheel spacers you didn't use on your 4x4 work on the vitara non 4x4 ? and can you share the link to them ?
Nice build , where can I buy a snorkel for grand vitara xl7? it has air intake in front left corner
Pretty cool build iam doing the same thing where did u get the snorkel from?
Hello Donnie.
What shocks did you use up front?
Best regards Conny from Finland
How did yoh get the front wheels to camber?
What year Tacoma for those shocks?
Hey @DonnieDispersed those little notched areas on the intake is that to release debris before it gets to the airfilter? If not look into a Snorkel Head Cyclonic Pre Cleaner (round ones). Amazon has em $30 & up. Toughest part might be finding the right size. Too big it won't clean like it should & too small will restrict the airflow too much & starve the engine of air. Looking forward to seeing what you do next.
I believe that is how the head is designed to work. Letting stuff fall out before it gets down to the filter.
Looking forward to a long term review & what the air filter looks like since you put it on @@DonnieDispersed. Save the old filter for a comparison if you could.
I have an 03 tracker added the 2 in spacer can anyone help on wht shocks to get to help get a smoother ride.like wht other year of vehicles have the same front and rear shocks 2inches longer for a 03 tracker 2inch spacer lift
Just bought a 2002 GV and I'm so stoked to build it out. Do you have any updates re how your Suzuki has been?
I have a 2000 GV 4x4 I keep at my house in Baja. 2" lift, old man emu shocks, 225x75x16 M/Ts, Warn hubs. Does great.
Hi, did you keep the front shocks stock?
Sweet build.🎉
Yes, stock but I put new ones in.
You said the shocks are for a 2wd toyota tacoma what year? the the KYB 554350 you linked in the description are listed as rear shocks for the 4x4 tacoma
I confirmed the ones I linked are the ones I used. When I referenced the part number online I believe it said it fit the Tacoma Pre-Runner which is why I said 2wd but it makes sense that it would fit the 4x4 and the prerunner.
i have a suzuki grand vitara 2004 and it has almost 400k kilometers, would it be worth it to put a snorkel and lift on it? i dont wanna spend the money for it to die a month or 2 later
So what was the idea behind the manual hubs? These rigs don’t engage the front diff at the hubs, but rather in the differential itself. I suppose disconnecting the hubs from the driveshafts would provide a tiny mpg improvement?
Better mpg less daily wear and tear.
Did you have to remove the rear bump stops to get the spacer on? We have the same lift and it won’t sip on over the bump stop. We can’t get the bump stop off.
If I recall correctly, I removed them and modified them to work with the lift. It’s been a while so I can’t remember exactly what I did
would you happen to know if the 2002 xl-7 model has the same rear shock mounts?
Can’t say for sure, but I would assume so.
Hey brother. I’m just curious if you kept the same original front shocks and just added The lifting kit. I just bought an manual, v6, 4x4 and I’m thinking to work on it.
Yes I reused the front struts because they were still in good shape.
Круто!
Have you had trouble with the front swaybar links?
I ended up removing the sway bar up front.
Bella! Molto lontana dalla mia! 😪
Are you still enjoying your Vitara?
Do you think the wheel spacers would fit if you still had the stock hubs? and do you have a link to buy them?
Yes, they would’ve fit with the stock hubs. Don’t have a link right now, but I did order them on eBay.
I didn’t notice in your video what you did for the front shocks to get the extra extension. Are the Tacoma fronts compatible with the GV? Thanks
Stock KYB shocks in the front. The lift kit spaces the front struts down from the body so the shocks won’t see any additional travel up front.
Thanks!
what shocks did you get for the front?
Standard struts that were on it. They happened to be KYBs
Did you have any issue with going to a larger tyre size?
Tires rub the frame on full steering lock, but otherwise no issues after doing the lift.
Could you give the specs on the wheel spacers that you didnt use?
www.ebay.com/itm/192039762414
Thanks for the video. What part of the wheel spacer did you try machining? I’m contemplating doing this as well but with the G1 Tracker hub which might be a smaller area. Looking for specifics of what you tried exactly and where it failed. Can I buy your other two that are still good?
Where did you get your snorkel? I found one on eBay but the shipping is $60
The company was based in Russia. So if you’re in the US they’re not available anymore.
so you didnt switch the front shocks?
Front shocks remain stock.
Not bad at all for 1500
Did u use the original shocks up front ? Or wht shocks Did u use up front?
Stock KYB struts up front. The lift kit spaces them down from the body, so they don’t get any extra travel like the rears.
@DonnieDispersed thnk u for the reply I added the spacer lift on my 03 tracker now it rides rough. So I wasn't sure wht shocks to get tht would make it run smoother
@DonnieDispersed I'm sorry I confused my self. U said stock kyb up front , so stock 03 tracker shocks up front?
@@tbarela032003 correct. Stock up front.
@DonnieDispersed thnk u so much I been looking for information on wht shocks to use with the spacer lift couldn't find anything . Thnk u so much for the reply