Thank you very much! I couldn't figure out how to get that plastic piece up until I saw your video. I had to replace the Inlet Valve Assembly and it was easy once I saw this.
THANK YOU!!! THANK YOU !!!! THANK YOU!!!! I scoured videos and diagrams throughout the internet for two hours looking for some hidden screws. What a relief when I saw your video. I was finished the job 10 minutes after I viewed. Did I say THANK YOU??????
The one & only video on this! I've been prying all over the thing, and i couldn't get it. Thought it slid backwards. Now I'm like Dang me! Thanks for the To the Point Video on this. 👍✌
Incredibly helpful video. Thank you for getting straight to the point and not regaling us with your general thoughts on the washer, LG, or life :D just took mine apart with your video to guide me!
Thank you very much, I did not want to break it and was not sure it would just pop off. But after watching your video I see that it was meant to make that sound and pop off the way it does. Thank you very much, it's always Mentally stressful situation not to break a piece of plastic so thank you
Thank you! That's what I needed after 25 youtubes showing me how to turn off the water and showing me pictures of pliers. How to get that damn cover out of my way.
Thank you for this! Can you recommend a replacement part for the water inlet valves? Too many options when I Google. Mostly I don't want to flood my house.
Are the valves inside separate pieces or all one part? And interestingly, mine does not have that pry gap. I have been unable to get that cover off completely.
Roger Navarro : thank you SIR . MY PROBLEM IS ON RINCE CYCLE : SPINS BUT SOLONID WONT OPEN EVERY NOW AND THEN . LOOKE LIKE 5 SELONIDS THERE ? WHICH ONE IS FOR RINCE CYCLE ? THE OTHERS WORK FINE ON WASH CYCLE . ANYONE EVER HAVE THIS ISSUE ?
I changed the inlet valve because it was dripping water, now with the new one installed water doesn’t flow in when starting the wash. Any recommendations?
You’ve likely verified that the wiring is as it was before you disconnected it and that the water supply is opened. Next step would be to look at the ‘control module’. Not sure the part number or name of that part. Another possibility is that the valves you got are faulty.
it was a long time ago, but I did find reasonably priced replacements - they came all together, not just one, I seem to remember. Good luck and I hope you find what you need.
Thank you so much for demonstrating this. It surely saved me a lot of frustration.
Thank you very much! I couldn't figure out how to get that plastic piece up until I saw your video. I had to replace the Inlet Valve Assembly and it was easy once I saw this.
Excellent! Glad to hear!
This saved me way more than a few minutes thank you so much.
Just what was missing from all of the other videos. Made this repair job simple because of your video, well done!
For this model LG, this post is a God-send; saved a lot of bucks and frustration on how to get to water valves.
Perfect!! As shown. Loud noise and all! I though i was breaking the plastic (It didnt break) it popped straight up just like the video.
thank you!!
Let’s go! So glad it helped. 👍🏼
Thank you! It didn't make sense for it to come off any other way, but I was afraid I was going to break it.
CZcams hasn’t paid you enough for this video. Thank you sir!
🔥
I have the same problem. THANK you sir. Much appreciated.
THANK YOU!!! THANK YOU !!!! THANK YOU!!!! I scoured videos and diagrams throughout the internet for two hours looking for some hidden screws. What a relief when I saw your video. I was finished the job 10 minutes after I viewed. Did I say THANK YOU??????
The one & only video on this! I've been prying all over the thing, and i couldn't get it. Thought it slid backwards. Now I'm like Dang me! Thanks for the To the Point Video on this. 👍✌
Incredibly helpful video. Thank you for getting straight to the point and not regaling us with your general thoughts on the washer, LG, or life :D just took mine apart with your video to guide me!
🤣 Hilarious. Glad it helped.
Thanks for taking the time and making the effort to show that.
THANK YOU!! You definitely helped me avoid breaking plastic parts and having to replace the entire back cover,
Thank you! Exactly what ALL the other videos were missing for this model.
Glad it helped!
Thanks! This really helped to cut down on the “what the f@&!’s” when I needed to clean the inlet valve!!
Excellent! Glad it helped. 🤙🏼
God bless you for saving my sanity in trying to find how to do this!
Thanks. I had a heck of a time finding out how to remove the cover.
I can't believe the other videographers didn't struggle with removing the back cover their first couple times. Thanks.
I know it! I was blown away when I couldn’t find it. Glad it helped. All the very best!
Thank you! Spent way too long trying to be gentle and not break it!
Thank you very much, nobody had this video for this washer anywhere, short and sweet thanks man.
Glad I could help. 👍🏼
I echo the other comments. This was incredibly helpful and didn't waste time.
Thank you for showing me that.
tysm I’ve been afraid to make the sound for 15 mins already
I spent a day on this -- you video saved life!
Thank you very much, I did not want to break it and was not sure it would just pop off. But after watching your video I see that it was meant to make that sound and pop off the way it does. Thank you very much, it's always Mentally stressful situation not to break a piece of plastic so thank you
Thank you! That's what I needed after 25 youtubes showing me how to turn off the water and showing me pictures of pliers. How to get that damn cover out of my way.
‘Pictures of pliers’ 🤣😂
Thank you!
Life saver
Holy heck! Thank you
@@user-vw4gu2sj4x 💪🏻 Let’s go!
Just what I needed. THANK YOU!!!
Awesome, thanks! Just what I needed.
THANK YOU for this video!
Thank you very much that’s what I wanted to see
Thank you for this! Can you recommend a replacement part for the water inlet valves? Too many options when I Google. Mostly I don't want to flood my house.
Glad it helped! it was a while ago, but the part I got from AppliancePartsPros.com was priced right and worked well for us.
Thanks
I dropped a link to this on a few of those other videos that don't show this detail.
thank you
Glad it helped.
Thank you!!!!
Are the valves inside separate pieces or all one part? And interestingly, mine does not have that pry gap. I have been unable to get that cover off completely.
Do you have the same model #? The valves are mounted together. I think you can buy them individually, but think they’re normally sold together.
Roger Navarro : thank you SIR . MY PROBLEM IS ON RINCE CYCLE : SPINS BUT SOLONID WONT OPEN EVERY NOW AND THEN . LOOKE LIKE 5 SELONIDS THERE ? WHICH ONE IS FOR RINCE CYCLE ? THE OTHERS WORK FINE ON WASH CYCLE . ANYONE EVER HAVE THIS ISSUE ?
I’d recommend replacing all the valves while you’re in there. They come in a set/group anyhow. Good luck!
Curious, did the valve replacement due the trick?
@@roybotic1 YES SIR .
I changed the inlet valve because it was dripping water, now with the new one installed water doesn’t flow in when starting the wash. Any recommendations?
You’ve likely verified that the wiring is as it was before you disconnected it and that the water supply is opened. Next step would be to look at the ‘control module’. Not sure the part number or name of that part. Another possibility is that the valves you got are faulty.
Appreciate it! I put the old one back and the water flows must be faulty thanks
Anyone find a good water inlet valve for this one? I got IE code and cant really find a good replacement part for a good price.
it was a long time ago, but I did find reasonably priced replacements - they came all together, not just one, I seem to remember. Good luck and I hope you find what you need.
Thank you!! Just what I needed.