Jonathan turbo it's me Mike. I had no idea you had a channel bro. Your work is f****** awesome! I just checked out that cb750 you did. That thing is a maniac. Good job! Justin turbo Man Kaplan cycles number one God bless America New England motorcycle museum❤
Nice to see correctly made oil return from the turbo with a pump. Too many of the return to sump under the pickup destroy your engine with foam setups.
You are definitely going to need Fast by Me swingarm extensions. I have a gen1 MR. TURBO draw through setup bike here in the garage, and it stands up with a 280 pound rider. It either willeys, or spins.
Nice build. My first turbo build was similar. A 86 gsxr 750 limited. Ihi turbo, blow through 1100 carbs , with twin side mounted intercoolers. Same oil feed and return check valves you used.. made 179 on a dynojet. I believe was in 1991. Still have vids from it. Always had little issues with the return pumps. On my latest build cbr900r/gsxr 1000 turbo i machined a spacer with reed valve on oem oil pump pickup to provide suction for return. Took a bit of tine and some black magic to perfect it but worked great. haha. See it in action in vids.on my channel.
That sounds like a sweet piece of kit! Twin intercoolers is a cool idea. I prefer a gravity drain from the turbo but it's hard to get the turbo to sit high enough. The scavenge pumps aren't the best solution it's hard on the turbo.
@@Realboostedbikes i keep saying i am going to make a short vid with pics i have of the build and some old school on bike vids of that bike. the vids aren't best quality as cams back then were horrible .lol but still have some cool vids of the speedo stopping working about 50mph then jumping to 150mph when the front wheel touches the ground again.. that was back when the speedos ran off the front wheel with a cable.. i would snap the end of the speedo cable off every few weeks then tig it back together and repeat, over and over. .lol. if i ever get to posting a vid of my 86gsxr 750 limited build ill let you know. keep up the gd wk. jb-
do hayabusa rod bearings also fit the old suzuki oil cooled engines as well? Also did you have to degree the cams in with adjustable cam gears when using the spacer plate?
Yes the hayabusa rod bearings do fit, they are the same dimensions as the stock bandit rod bearings. You don't have to degree the cams with the spacer plate but I just wanted the most power possible out of it. You do need slotted cam gears to degree them as well
cool bike...i have a zx11c efi turbo...got the efi kit from Moody Performance....and custom plenum with secondaries. i want to see a video on your zx11 turbo bike 🎉
I saw 9.8-10.2 to 1 AFR at wide open throttle. Wayy to rich for good numbers. Stock pilot jets, dynojet needles, 132.5 main jet. Going to step the pilot jets up one size and go back to stock needles and see where is sits then.
@@Realboostedbikes Your bike looks superb! I am familiar with D Dunlop's work which here in the UK is very well respected. I have a bandit turbo kit ready to go onto a bike but the builder recommends going with 115 main jets. This would be for a std Bandit piston set up with low boost. 115 seems a long way down from 132.5 jets, what would be your thoughts on this size of jet? (My kit is not a FBM one!).
I have been recommended (as above) 115 mains, needle clip second from top and air screw 2.5 turns out. The fuel pressure set at 2psi static. As somebody with a dyno, do you think this would work or be a touch lean?
@@Realboostedbikes Thanks for the info. I'll try 130's when the time comes. My kit supplier says that you should avoid dynojet parts like the plague but I don't know enough to work out why. He has a YT channel with some of his bikes should you be interested, search Pete Field. Thanks again!
Turbo bikes for drag racing only. Never want that thing spooling and hitting mid corner on a bike. Supercharger fine no big hit all at once, deadly on bikes when leaned in a corner.
Not true with modern turbochargers. This bike feels like its supercharged the power if very linear. It's not like my older turbo bikes where the power doubles within 1500 rpm
Thats just wrong, you have actually not ridden a turbo bike it seems. Correct sizing the turbo makes wonders on drivability. Ever heard of factory made turbo bikes? Just about every manufacturer has made some at one point or another.
Probably can't see it on the street b/c the damned thing takes off ~ as in, "Off the Ground" !? It's fun seeing people who've got the tools & the ability to make krazy sH!T that works. For me, I'd get killed between 1st - 2nd gears so you be careful on this rocket ship. I await the next installment of, "Turbo to the Stars". Enjoy.
@@Realboostedbikes ~ I do believe you but I just admitted that from 1st - 2nd(130mph) I get myself deAD !! I have no idea what a bike of this much power is like..... but I'll tell ya I appreciate you doing it & having that much ambition & craftsmanship to lay out/design those attributes into a bike. Incredible to see it. Waiting for the next round of it..... I'm smiling here - like a boyish grin & I'm 62 feeling like this. More power to ya. Please be safe. peace
Always liked the old Bandits, I'm guessing those are Triumph speed triple headlights? I don't remember the original bikes having dual headlights. Anyhow, looks like alot of work went into it...bike looks good.
Feels like I've been waiting an eternity to see this beast on the dyno. Literally my dream motorcycle right there
My Bandit 12 is begging for a turbo too. 165 mph with low budget mods is not bad though
Jonathan turbo it's me Mike. I had no idea you had a channel bro. Your work is f****** awesome! I just checked out that cb750 you did. That thing is a maniac. Good job! Justin turbo Man Kaplan cycles number one God bless America New England motorcycle museum❤
MR.KING TURBO 😮 MAKING MADESS
Good quote, I've used it myself 👍😉
Jonathan, you do the best work turbo man
Good video bro 😎 keep up the good content ❤
Nice to see correctly made oil return from the turbo with a pump. Too many of the return to sump under the pickup destroy your engine with foam setups.
new sub and congrats on the channel. didn't realize you had one, been follow kaplan cycles for a while now. god bless america
You are definitely going to need Fast by Me swingarm extensions. I have a gen1 MR. TURBO draw through setup bike here in the garage, and it stands up with a 280 pound rider. It either willeys, or spins.
Like to see a ktm duke turbo charged. Hell any cc would be cool
Awesome is the word.
Sick build brah
Nice work 👍🏻👍🏻
Nice. Very nice indeed!
Great build! Can you give us more info on the oil scavenge pump for the turbo.
It's a Facet Posi flo 7-10 psi pump from ebay with 10an fittings on one side and a 5/16 barb fitting on the other
@@Realboostedbikes thanks for the reply
Nice build. My first turbo build was similar. A 86 gsxr 750 limited. Ihi turbo, blow through 1100 carbs , with twin side mounted intercoolers. Same oil feed and return check valves you used.. made 179 on a dynojet. I believe was in 1991. Still have vids from it.
Always had little issues with the return pumps.
On my latest build cbr900r/gsxr 1000 turbo i machined a spacer with reed valve on oem oil pump pickup to provide suction for return. Took a bit of tine and some black magic to perfect it but worked great. haha.
See it in action in vids.on my channel.
That sounds like a sweet piece of kit! Twin intercoolers is a cool idea. I prefer a gravity drain from the turbo but it's hard to get the turbo to sit high enough. The scavenge pumps aren't the best solution it's hard on the turbo.
@@Realboostedbikes i keep saying i am going to make a short vid with pics i have of the build and some old school on bike vids of that bike. the vids aren't best quality as cams back then were horrible .lol
but still have some cool vids of the speedo stopping working about 50mph then jumping to 150mph when the front wheel touches the ground again.. that was back when the speedos ran off the front wheel with a cable.. i would snap the end of the speedo cable off every few weeks then tig it back together and repeat, over and over. .lol.
if i ever get to posting a vid of my 86gsxr 750 limited build ill let you know.
keep up the gd wk.
jb-
Awesome bandit what was the make of that chain you got on your bandit got Busa streetfighter
Wicked!!! 💪🏼👊🏼🎨✨❤️🙂
I need my turbo triumph Daytona on that dyno.
Nice.
Fantastic build, would love to ride a turbo bike once in my life. Do the exhaust or the turbo heat your foots ?
Yes it does I'm going to fabricate a longer dump soon behind the footpeg
@@Realboostedbikes Haha it's mad.
I need to turbo mine same year and make good video with detail
do hayabusa rod bearings also fit the old suzuki oil cooled engines as well? Also did you have to degree the cams in with adjustable cam gears when using the spacer plate?
Yes the hayabusa rod bearings do fit, they are the same dimensions as the stock bandit rod bearings. You don't have to degree the cams with the spacer plate but I just wanted the most power possible out of it. You do need slotted cam gears to degree them as well
cool bike...i have a zx11c efi turbo...got the efi kit from Moody Performance....and custom plenum with secondaries.
i want to see a video on your zx11 turbo bike 🎉
I'm getting the turbo rebuilt right now and then it's going on the dyno shortly after!
@Realboostedbikes that's great..I look forward to it 🏍
Awesome bike. What idle Afr do you get and what carb settings are you using to set it up overall?
I saw 9.8-10.2 to 1 AFR at wide open throttle. Wayy to rich for good numbers. Stock pilot jets, dynojet needles, 132.5 main jet. Going to step the pilot jets up one size and go back to stock needles and see where is sits then.
@@Realboostedbikes Your bike looks superb! I am familiar with D Dunlop's work which here in the UK is very well respected. I have a bandit turbo kit ready to go onto a bike but the builder recommends going with 115 main jets. This would be for a std Bandit piston set up with low boost. 115 seems a long way down from 132.5 jets, what would be your thoughts on this size of jet? (My kit is not a FBM one!).
I have been recommended (as above) 115 mains, needle clip second from top and air screw 2.5 turns out. The fuel pressure set at 2psi static. As somebody with a dyno, do you think this would work or be a touch lean?
@dixiethedog1777 mains will be too lean start at 130's. My bikes only rich with the 130s because I have dynojet needles
@@Realboostedbikes Thanks for the info. I'll try 130's when the time comes. My kit supplier says that you should avoid dynojet parts like the plague but I don't know enough to work out why. He has a YT channel with some of his bikes should you be interested, search Pete Field. Thanks again!
What gen 1 carbs are you running and where did you get those aluminum caps from?
Gen 1 bandit 1200 carbs, caps where from England they are no longer available but a bunch of others manufactor them now
What state you in?
Help me build mine I can’t even get the Mikuni carbs right… did you teach yourself?
Yes I'm mostly self taught. What issues are you having with the stock carbs?
I have a2015 gsx1250 u think that set up would work on my bike
No the 1250's are completely different and they don't have much aftermarket. The 1200's has an incredible aftermarket
I want to see this done to a Kawasaki z1300 6-cylinder. Or a CBX1000
Turbo CBX coming soon. Ball bearing draw through turbo first ever on a CBX
@@Realboostedbikes I wonder if an equal length 6 into 1 turbo manifold is possible.
Damn how many turbo bikes you own?👍
Working on #10 now.
what compresion is it runing
9 to 1ish
Turbo bikes for drag racing only. Never want that thing spooling and hitting mid corner on a bike. Supercharger fine no big hit all at once, deadly on bikes when leaned in a corner.
Not true with modern turbochargers. This bike feels like its supercharged the power if very linear. It's not like my older turbo bikes where the power doubles within 1500 rpm
Thats just wrong, you have actually not ridden a turbo bike it seems. Correct sizing the turbo makes wonders on drivability. Ever heard of factory made turbo bikes? Just about every manufacturer has made some at one point or another.
#1 😻
Why would anyone need or do this? How does your insurance carrier feel about these mods?
Sshh
To pick up more chicks dude 😉
Anyone can just buy every bolt on mod in the catalog. No-one can do this.
because he can .... is why i would build this
Probably can't see it on the street b/c the damned thing takes off ~ as in, "Off the Ground" !? It's fun seeing people who've
got the tools & the ability to make krazy sH!T that works. For me, I'd get killed between 1st - 2nd gears so you be careful on
this rocket ship. I await the next installment of, "Turbo to the Stars". Enjoy.
It will pull the front wheel at 170mph
@@Realboostedbikes ~ I do believe you but I just admitted that from 1st - 2nd(130mph) I get myself deAD !!
I have no idea what a bike of this much power is like..... but I'll tell ya I appreciate you doing it & having that
much ambition & craftsmanship to lay out/design those attributes into a bike. Incredible to see it. Waiting
for the next round of it..... I'm smiling here - like a boyish grin & I'm 62 feeling like this. More power to ya.
Please be safe. peace
Always liked the old Bandits, I'm guessing those are Triumph speed triple headlights? I don't remember the original bikes having dual headlights. Anyhow, looks like alot of work went into it...bike looks good.