How to Test & Replace the Compressor Capacitor in a Refrigerator | Repair & Replace

Sdílet
Vložit
  • čas přidán 29. 06. 2024
  • Failed start or run capacitor? In this episode of Repair & Replace, Vance shows to troubleshoot and test the compressor capacitor with a multimeter. If the refrigerator compressor is not starting, it could be a problem with the start or run capacitor. If the compressor is faulty, then the refrigerator will not start and will not cool properly.
    Need an exact replacement part? Use the model lookup tool here: www.amresupply.com/lookup
    Order refrigerator repair parts online: www.amresupply.com/catalog/Re...
    Playlist: Refrigerator Troubleshooting & Repairs: • Refrigerator Troublesh...
    Complete Compressor Troubleshooting Guide: • Refrigerator Compresso...
    This applies to Whirlpool, Frigidaire, Kenmore, Maytag, LG, General Electric, and Samsung refrigerators.
    ___________________________
    00:00 Intro
    00:50 How it Works
    03:06 What You'll Need
    03:14 Model Lookup
    03:34 Getting Started
    04:33 Start Component Removal
    05:53 Capacitor Testing
    06:43 Start Component Replacement
    07:33 Finishing Up
    ___________________________
    AMRE Supply provides homeowners, service contractors, and property management with the parts and knowledge needed to get the best performance out of any property. Stocking the largest selection of appliance parts, heating, plumbing, lighting, and janitorial supplies, AMRE ships almost anywhere in Canada within 24 - 48 hours. Expert help is available online, over the phone or in person at one of the many locations across Canada.
    Connect with AMRE Supply
    Website - www.amresupply.com/
    Facebook - / amresupply
    Twitter - / amresupply
    Instagram - / amresupply

Komentáře • 10

  • @kamalzellag2814
    @kamalzellag2814 Před 7 měsíci +3

    This is one of the excellent videos on youtube for such type of maintenance.
    It is clear, well structured and informative.
    Thank you for putting the effort and time in this video.

    • @AmreSupply
      @AmreSupply  Před 7 měsíci +1

      You're welcome, we're just happy to share some good information! If you're curious we have an entire playlist of refrigerator repair videos, (with another 50 videos on the way) czcams.com/play/PLCo9SMjkdWBxXf2GEiSiunxAlN3ENxXGq.html

  • @Tagowen4
    @Tagowen4 Před 11 dny

    Hello there,
    I have this Bloomberg built in freezer which is not cooling at all. The evaporator fan is running but no cooling in the evaporator. I could not access the compressor to verify if it’s running. Are you able to help and provide me how to access the compressor of a Bloomberg built in freezer, model #: BRFB1050FFBI

  • @MA-lm1ql
    @MA-lm1ql Před 6 měsíci

    So this fridge has two capacitors?
    The cylinder type and then one attached to the start relay?

    • @AmreSupply
      @AmreSupply  Před 6 měsíci

      Thanks for watching. These are 2 different models to show the variation of how capacitors are mounted and wired. At 5:29 "in other models" is mentioned to help highlight this.
      There might be some models with both start and run capacitor but this are not as common. Run capacitors are more common in general.

    • @chrismcclain6518
      @chrismcclain6518 Před 2 měsíci

      @@AmreSupplyI think what we’re both seeing is at 5:18 he states he’s grabbing the start relay and capacitor with an obvious capacitor attached to the relay (this is the same model with the cylinder capacitor in the back) Is the cylinder capacitor the start capacitor then?
      I’m having a tough time differentiating between start and run capacitors. Are there any physical attributes or where they’re located/not located that you can use to consistently tell them apart? Any explanation would be appreciated, thanks!

    • @chrismcclain6518
      @chrismcclain6518 Před 2 měsíci

      @@AmreSupplyYou have excellent videos by the way. I’ve since subscribed and wish the business well! 👍

    • @AmreSupply
      @AmreSupply  Před 2 měsíci +1

      @@chrismcclain6518 At 5:18 there is a single cylinder run capacitor for that Frigidaire model. At 5:29 there is a mount on rectangular run capacitor on the Whirlpool model.
      If a model has a start and run cap they will likely be close together and obvious.
      For some older models that have a start capacitor, these will likely be cylindrical, and will generally be larger. You can also know if it is a start capacitor based on where on the relay the wires are connected. See the example at 2:38 for more detail.

    • @AmreSupply
      @AmreSupply  Před 2 měsíci

      @@chrismcclain6518 Thank you, we're just happy to share some good info! These videos take a lot of effort to produce but we feel it's worth it in the end!