TPA3110 XH-A232 30W+30W Amplifier Board//TPA3110 XH-A232 Board connection with Bluetooth and Testing

#TPA3110#AUDIO_BOARD #CREATIVEDIPU
TPA3110 XH-A232 30W+30W Amplifier Board//TPA3110 XH-A232 Board connection with Bluetooth and Testing
TPA3110 XH-A232 30W+30W Amplifier Board//Dual-Channel Digital Amplifier Board Stereo Class D
TPA3110 XH-A232 30W+30W Amplifier Board//Dual-Channel Digital Amplifier Board Stereo Class D
LINK: amzn.to/3VcS7IM
Dosto ye hamara naya channel hain is channel main regular video upload hota rahega is channel main aplogo ko milaga Electrical ka bahut sare cheez banana ka tarika and Repair[How to make]
..............................................................................................................
.....................................................................................
o How to install volume control in amplifie: • How to install volume ...
o How to make color light at home: • How to make color ligh...
o 3.7v battery charger circuit with auto cut off: • 3.7v battery charger c...
o How To Make Remote Control On and Off Switch: • How To Make Remote Con...
o 5v audio board and other 2 board connection: • 5v audio board and oth...
Instagram: / creativedipu
CREATIVE DIPU CZcams Channel: / @creativedipu
TPA3110 XH-A232 30W+30W Amplifier Board
TPA3110 XH-A232
TPA3110 XH-A232 Board connection with Bluetooth and Testing
tpa3110 xh-a232
tpa3110 xh-a232 30w+30w
tpa3110 amplifier board
5v audio board and other 2 board connection//how to make bluetooth sound box(home made)
sound box,how to make audio board
how to make bluetooth sound box at home
bluetooth,bluetooth sound box
HOW TO MAKE 12V BLUETOOTH SPEAKER BOX
Dosto ager mara Video achha laga to
LIKE
COMMENTS
SUBSCRIBE

[@randallaxel4111]

Finally i finish your project, Creative dipu! Everything work excellent, but i have a problem the bluetooth dont turn on, but if i connect a cable auxiliar i have sound; I made a bridge from the positive in the module bluetooth to the positive of the amplifier and the bluetooth turn on, but i think than this not be the correct, what should be the wrong why the bluetooth dont turn on?

[@subirmondal8743]

Legend 👍

[@taraknathdhibar4724]

Super sir👍🙏🏻💥

[@YohanAntocan-ec8xi]

i used the same set-up of amp and bluetooth module but i dont use the 7805 ic regulator, my power source is a battery pack of 12.6 volts connected to the amp is 12 volts while the bluetooth module is 3.7 volts supplied by buck converter, (same source of 12 v battery pack)when powered on i notice buzzing a high pitch noise and sometimes a low pitch, what is the remedy for this? do you have the idea?

[@JH10Rider345]

bhai meko ye bata do
jaise 30 watt ka subwoofer and 10watt ke 2 ya 3 speaker use kar sakta hai kya isme.
aur ho sake to iska ek video bhi bana do.

[@moreideas03]

good

[@mocktailgamer1748]

Bhi kya tum 8 volt se is amplifier ka sound test kr sakte ho

[@domynicdomy8407]

I buy PAM8403 would you show me how to connect without that ic.

[@ashirp4785]

Super board

[@pravinbhadane795]

Bro ismei 15 + 15w k speakers add kr sakte hai kya ?? Plz reply

[@creativedipu]

YES

[@Gagansharry]

Bro yeh board single ic hai 15+15 watt he chala pata hai not 30 watt

[@royalrajputana9407]

8inc 2 spker chalega?

[@experiencegirl3434]

Bhi please is board ko 8 volt DC battery se chalao please 🥺 aur batna ki full sounds krne ke bad sound fatha h v ya nhi please 🥺 bhi

[@ranaroy2040]

Laptop charger used kar sakta hu...power supply ke liye

[@creativedipu]

YES

[@shaikhirfan6935]

अब 7805 की करदो छुट्टी हमेशा के लिए उसकी जगाह CA-1235 मॉड्यूल ले और एक B0505 मॉड्यूल ले 1W का 4पिन वाला जो इनपुट 5v और output 5v से दोनो का कनेक्शन करे, फिर देखो कमल, noise हमिंग खर्र फर्र की जो आवाज है वोह 100 परसेंट बंद होजाएगी 100पर्सेंट

[@Parveensaini4you]

Is bord par 20watt ya 40watt mein se bhi koi speaker chala sakte hain kya..?

[@moviehous4623]

Vai duble tpa3110 chal shakta he?
Esme ek vedio banaye vai. Please

[@aishinayak2010]

Bro ac current se chalega kiya

[@creativedipu]

NA (Use 12v Transformer)

[@arijitmandal8285]

❤️❤️❤️❤️

[@ketankarelia2203]

ghar me 5.1 system assembly karne k liye board advice kijiye bro.. thanks

[@goodghost6182]

khanjar khana hy tera ghr 5.1

[@sumiteditz.]

Sir can we give 12v 2amp ?
Did their will be any problem for sound ?
Please replay 😢🥺

[@COURSEGAMING.]

No bro

[@vinaysagar0586]

Dipu bhai....
ic lagane ke baad 12 volt ki battery se chalane par kya isi bluetooth module 5.0 se 12 volt ki battery charge hogi mobile charger ke dwara

[@subhrajitbarai7121]

Is system ko Rechargeable banane ke liye kya karna pade ga?

[@deepaknanda1113]

12 volt ke liye 3S bms...ya best output ke liye 5S BMS ...21 Volt
With laptop adapter

[@itsBlogtime]

Sir power supply kitni lagai hai

[@createwithyogesh7623]

Bro how is the sound output ? Better then 2.1 home theatre board plz reply?

[@nazarcm1754]

Ye board kachra bord hai bhai

[@defaultuser15953]

15+15 w at 24v and 10w at 12v at 8ohm load only...

[@Rastar1624]

@@defaultuser15953 15w+15w at 16v bro

[@1stand10lindavista3]

Hello, what is the name of the component with the 3 pins that you placed in the Bluetooth module, and what are its characteristics? I imagine that it works to reduce the power for the Bluetooth module to 5V. thank you!

[@techworks394]

Good

[@creativedipu]

Thanks

[@NITISHKUMAR-qx5dc]

agar ye two 3110 isme hai to ye 4 ohm par 30w par channel output dega 16v par

[@riad2002]

i am new subscriber 🥰🥰🥰🥰🥰

[@swarnalikarmakar4149]

audio quality might be good but this board has single TPA3110 d2 ic under the heatsink ....and that can't provide 30watt +30watt output not even BTL configeration (☝mono 30 watt in BTL config)

[@vanshpartap9810]

Right

[@abhijeet72]

1- class d bola ni jata wo class d hi hai.0:49
2-15 watt output per channel not 30 watt .30 watt is total output
I hope it helps ☺️

[@creativedipu]

Thank You

[@sonumusic007]

Audio output mea nagetive wait nahi lagana tha😊

[@user-lj7ph3fn8x]

Up ko me, 👍 kar raha hu par kabhi kabhi dj songs to bajao⚔️ not NCS

[@creativedipu]

copy right lagjiaya

[@upentiwari2969]

Bhai mujhe samajh nhi aaya plZz diagram description m daal de bhai

[@dipeshnivalkar8411]

Bhai isko charging kaise kare.. Please muze charging socket pura connection batado❤pleas e reply dedo bro nahi to mera pura saaman aisehi west ho jayega

[@htvturkmen1518]

How to add volume button

[@rameshbandikeri872]

I m already brought this board, tested but i m reciveing output is very low volume. This is not 30+30watt

[@rakeshshindhe9165]

How to charge battery

[@nazarcm1754]

Kya powerfull. ye board noise produces karthahai derty amplifier

[@sujalkumarbiswas5260]

4ohm25 w ka speaker lga skte hai

[@creativedipu]

Yes

[@yourfallinstar]

Battery charger kise kre

[@jaswanttanwar5402]

बैट्री चार्ज कैसे करेंगे

[@luharluhar8839]

भाई यह एंपलीफायर कहां से खरीदा है ऐसा वाला एंपलीफायर मुझे भी चाहिए

[@kashifSiddiqui1122]

Rytronics pe 160+50 rupee ka mil jayega. Mene bhi wahi se buy kiya 😊

[@karangupta4893]

Brother 12v aur kitna ampere dena hai maine 12 2 ampere diya lekin sound bahut hi low hai please........ replr😢😢

[@piyushbunkar14]

Bro' ye board 8v-24volt tak ki power se run karta hai

[@impopio4987]

audio cut at max volume.. any fix?

[@creativedipu]

yes

[@filmymufta1667]

High volume pe sound cut ho k ata hai trip karta hai

[@kkteluguprojects6463]

Bro please tell me Pam 8610 vs TPA 3110 xh -a232 30+30 watt

[@kkteluguprojects6463]

Please answer me bro

[@kkteluguprojects6463]

I'm your subscriber

[@EXPERTAD]

Bhai hamming and high bass mey sound drop ho raha hai. Kya karu?

[@SparkGrowthTV26]

18 se 22 v de ke dekh le.. 3 Amp pe ya 5 amp pe

[@balongsenido7985]

what is the number of ic?

[@smyle78]

What IC?

[@durgeshsahamugdha2295]

Vai kinte Amp dene hote

[@creativedipu]

However, to achieve the full 15W per channel output power, a supply voltage of at least 16V is required.Amp=2/3

[@nikas4361]

зачем белый GND провод к каналу R припаял? 4:12

[@CrickterRick]

Brother the black wire is for ground

[@abhalim3574]

30+30 watt amplifier can out put 60 waitt in one channel

[@lovneetsingh6664]

No

[@True_Line.20]

80% volume ke upar cut ho raha hai
Power supply 12v 5amp ka hai fir bhi

[@tdo3367]

Mera left side speaker nahi chal raha bekar amp hai bhai full paisa barbaad

[@Anonymous-kw1un]

Volume kahan h 😂😂

[@pardillometal1]

Es 15w + 15w no 30w + 30w

[@creativedipu]

Yes

[@skfaridulhasan495]

A sab Saman khamelaga

[@creativedipu]

online Or offline

[@allgaming9401]

This amplifier very bad 😢😢😢😢
New bord only humming no sound

[@rathorerudra658]

Extra bakchodi

[@lol_kumar-_-]

15 + 15 watt bro not 30+30 watt ..... Galat information kiu dete ho ??? Tum khud ko uneducated dikhana chate ho kya ??

[@jaseemkhan9809]

Abay chutay ya 15+15 watts amplifier Matlab CZcams channel ha too kuch bhi chalay Gha ha

[@htvturkmen1518]

How to add volume button

[@9773460583]

Battery charge kaise karne ka