TIA Portal: PUT Command / PLC-PLC Communication
Vložit
- čas přidán 5. 10. 2019
- One way of PLC-PLC Communication.
PUT memory areas to a partnered PLC
If this video helped you, please consider helping me by joining my "GoFundMe" and donating a small amount to my cause. Link here:
www.gofundme.com/f/let039s-fi... - Věda a technologie
Hello! With PUT, Data Blocks can be optimized ?
Generally said: Yes!
But the topic is a bit more complicated... when using "optimized block access" you can not used on an "address based" way anymore, so you have to use the symbolic names or drag and drop (like I did in the video with the data that the first PLC sends). You can PUT a whole DB, simply by dragging it and dropping it at the "SD_1" input.
...but as said... the topic of optimized block access is quite complex, maybe I'll make a video on it in the future.
@@hegamurl7434 I think the topic of optimized block access will be very useful.
@@hegamurl7434 In case of whole db with different data types needs to be sent, should I make another db on the other side (plc) with same data types/lengths as well?
@@MAli-zh6cr yes
Once again, a logical clear explanation for anything Siemens based... Thanks so much 🙂
Man I ran out of inputs on a big project and thought "PLC to PLC communication should be easy" 72 hours of pulling my hair and you saved me. Had EVERYTHING right but couldn't get the REQ parameter to work and your video explained it perfects. Thank you!
Happy to hear it worked in the end!
Another great TIA Portal video, thanks a lot.
Thank you very much for so easy explanation of the complicated things!
My favorite teacher /Thank you!
Thanks again. I have got so much help from this site!
Keep'em coming!!
thanks for your videos, those are very useful to learn about automation
Sir your video always helpful for me....greetings from INDIA as well
Awesome video. Thanks!
My good friend you have a new subscriber. Thanks.
hello there greetings from saudi arabia. god bless you
Sir , your videos are very helpful thanks 🙏
Thank you so much!!!
That was so informative
Very useful, thanks.
i love u man, thanks a lot.
Thank you sir.
so clear thank you
thanks, grate job
Thanks bro.... 👍
மிகவும் நன்றி நண்பா
Master!
Give yourself some years and experience and you will be the master!
Thanks sir
MERCI beaucoup
Thanks
Thanks for this video..its helped me
Nice job, Hega! I have one question: can I use this protocol with SINAMICS devices or the S7 protocol is only for the comunication between 2 S7 PLCs?
Hey man! I really like your videos, your explanations are excepcional, thanks for this knowlegment.
Just a quick question, I have 2 PLC 1500, both have diferent subred, but one of them have two ethernet ports available, is it possible to link each other trought this free port?
😍😍😍
Hello , video is well explained as ever, but still a question : do'n I need to define the S7-connections in the network view are they generated automatically ? What is the SIMATI-ACC option ? Best allways on for easy configuration with unspecified partner ( in my case S7_1500 GET from S7-1200 ?
Hi, I'have got a 1214CPU and using TIA V15. Unfortunatley, S7-communication library is missing. Do you know if I can import it in TIA? If yes, where can I get this library?
Or is it a default library?
Thanks for your videos !
If we set unspecified is this must delete the s7 connection ?
My partner plc is s400 , I tried use this function communicate but always failed.
Is this command also available over Profibus (rather than Profinet)? Thanks :-)
The connection id is actually not taken care by TIA. I've tried to have more than 1 PUT instructions and all of the block will always have the identical configuration following the latest changes i made, e.g. ip address of partner, memory address, etc. And this might be my issue, i need to change the connection name.
hi great video , if i wanted to send a qr code value (say PAC123) from one plc to another is a put instruction the best way?
Hi Thanks a lot for all nice videos you share with us :-)
Is it even possible to test this PUT & GET function with PLC SIM? I does not get it to work....
Hello, thanks for such great videos.
Could you have a video on Ethernet diagnostics to find communication error in your network and display on HMI.
That would be very helpful
And thank once again
Hi sir! Your tutorial is amazing ❤. I have a question: is it possible to take text input from a human-machine interface and then process it using if/else statements like in programming? For example, the user types "password" and if the password is wrong, you know, like an if/else statement in programming.
This video came just in time! thank you so much!
I have a school project, in wich I have to communicate three S7-1200. for now, connecting two PLC's is quit clear, with three , do I just need to add PUT and GET functions in the three of the PLC's if i want to send and read data from all three of them?
Yes exactly! Junse repeat for the third PLC
@@hegamurl7434 so putGet is only for siemens s7 communication? What if i want ro connect to other systems with my siemens plc? You have a video on that?
What is the maximum size of data we can send in PUT command?
Good
Thanks for the video. I have a question. Can you do this with PLCs from different brands? i.e Sending data from my siemens PLC to an omron in a different project for example?
NOPE. Siemens S7 only.
Thanks to your good work.I have a question That i didn’t have a physical plc ,so shall configure two plc’s in a single project and test them with each other by single PLCSIM.Don’t bother if it is a genuine question
you can simulate two PLC by PLC SIM
Sir, I have confusion over profibus, profinet, ethernet?? Please make a video on this topic.
At 0:32 we found two ip address
1) is 192.168.1.1
2) 192.168.0.101
What is those two ip?? Please explain or suggest any video
Can this be simulated in PLC SIM,
I tried, I'm not getting value in other PLC.
Kann man damit auch bspw. M0.0 der einen sps setzt M0.0 der zweiten sps? Sprich kann man einfach nur merker 1 und 0 setzten damit?
Hi, another great video thank you. Just one question, In the PU_DB ADDR_1 parameter, (P#M0.0 INT 1) is M0.0 not just 1 BIT? If so how can you store an INT value in it?
Hello, pleace can i have a guestion.... i used a condition as you did at the end of the video for the REQ input. i also put a negativ contact "PUT_DB".DONE instead of freguency. but when i did it for the first time nothing has came into the my next plc. when i deleted it and did it again and upload the plc program again, it works. But when i was working on that again today also same problem and i have to do the same solution. deleted that condition and do it again the same. unfortunetly i cannot used the frueqvency condition, do you know why this negativ contact "PUT_DB".DONE doesnt work for the first time(the datablock put_db is green, but nothing has came into the database on the next plc...)? and is there any solution idea for condition like do it with every cycle of the cpu?
I need to get encoder value from another cpu can I use the GET bock
and how???
Hey, How can I send more information ? Im a beginner and you say in the end of the video that it is possible, how ?
How Can we send use put for more than 5 plc and send data to one Common plc.....
Please respond sir
Just subscribe ..
How to convert 1 Word into bits via siemens S7 1200 PLC?
How do you send multiple data..🙏🏽
Uhh it also works on Logo not only S7
why does not PLC 102 isnt on profinet red plz help sr
Kindly make a video on various communication protocols and what is the difference between each of them sir..
Will do at some point!
@@hegamurl7434 hi there.
You mentioned 14:46 that put/get is not your recommended type of communication but you mentioned "ip protocol"? Which one is that? Isit i-device/control? IO communication by pnpn coupler? Is that the most common?
DO you have to set up a TCON to do a put? If not what's the purpose of setting up the TCON in the prior video?
No you dont have to, they are different merhods of communication. The videos are unrelated
Do you have to be online for this to work? I can't get it to work at all. It tells me the data type is wrong when it is clearly correct, or it tells me the specified value is invalid
It says "The data type DInt of the actual parameter does not match the data type Remote of the formal parameter". In this case I dropped it in directly from the tag table of the receiving PLC, which is in my project. They are both Dints
I take it this method doesn’t work with S7-1200 PLCs?
Hi dear , Watching your vids . Best one can offer for the betterment of human beings . Thanks alot . Dear i want to send my Level signal from one PLC to other . I am no expert . Kindly, advice me videos in your playlist which can help me . Thanks
Where can I find the frame structure of a command between IHM and PLC by profinet? If I want to snif the protocol to discover how the adress of the word in PLC is coneccted with other adress word in IHM, how can I do it? Congratulations from Brazil. Thank you.
Don't know what exactly you are looking for... but for analyzing network packages I recommend a free tool called "Wireshark" with which you can analyze network packages
search for s7 protocol
@@hegamurl7434 I want to analyze it. Thank you for wireshark!
So you only put instruction to communicate.What about get instruction on receiving PLC.Is not required?
You only have the instruction on one PLC: If you want to read data from another PLC you use "GET" and if you want to push data into the other PLC you use "PUT". The other PLC does not need any function (although some prerequesites as described in the video)
Hegamurl hi,
Is there a limit on this process. I mean, can i send for example 200 byte datas with 300 ms rate ?
And could you share a lesson about putting or getting data from different brand plc's to siemens plc please.(not s7 connection)
Thank u so much again. God sent you to us. :)
Note: our network bandwith is very nice. There is no bottleneck on this topic.
Very good question! I have never tested the maximum, but also have never reached it. I'll simply test it out (and also read the documentation) on it, when I have the time.
As far as I know the PUT/GET here is only between SIMATIC components. For other devices I always recommend a TCP connection (my next videos will be about that)
With the 1500 system you Can PUT 400 bytes and GET 400 bytes
Will s71200 communicate with s71500
Hi
I have question maybe irrelative.
How we can mirror hmi to monitor without pc and use finger touch of monitor?
And if you can please make video about data logging server.
thankful
Hi! I am not sure if I fully understand your question, but if you want to use your PC as HMI you will need WinCC Professional Runtime on your PC, which will simply run a program that emulates an HMI on your PC.
Added Data Logging to my list!
Thank for your answer. But i want connect monitor directly to hmi.
Use sm@rt client ..
Is it possible to use Put and Get instruction with the CPUs with different TIA Portal Version? One using V15.1 and another using V16.0.
Please improve voice quality,
thanks for your videos, those are very useful to learn about automation