R/C Garbage Truck Packing!
Vložit
- čas přidán 26. 12. 2012
- The Norba RL35 model performing three compaction cycles, then driving away.
Havn't made any big progress since my last videos. The main difference is that some of the lights are working. Left to build is the container hoist system, and new side panels for the container. Hopefully that will be finished within a few months,, hopefully! ;-)
Most of my components were bought at:
www.fechtner-modellbau.de
They have a lot of good stuff!
Cab, chassis, wheels, tyres, suspension, front axle
Wedico, www.wedico.de
Alternative Cabs:
Bruder Arocs: www.bruder.de
Scale-art MAN TGS or Arocs: www.scaleart.de
Drive Unit
Motor: Servonaut GM32U450: www.servonaut.de
Cardan shafts: Fechtner modellbau.
Rear Axles: www.ruest-feinmechanik.de (Out of business?)
Hydraulics
Pump, cylinders, valves, filters, hoses, connections:
www.leimbach-modellbau.de/
I run my system at 15bar. Ø7mm cylinders for tailgate lift, all other cylinders Ø12mm. Pump article nr. H0102.
Electronics
Transmitter: Futaba FC-16 Boat 'n' Truck (Not available anymore)
2.4GHz conversion: FrSky: hobbyking.com/
Reciever: Frsky 8 channel: hobbyking.com/
Speed controller: Servonaut S22: www.servonaut.de
Winch speed controller: CTI Thor4s: www.cti-modellbau.de
Pump Switch: Futaba, but I would recommend using a single direction speed controller instead.
Winch Motor: PGM12L, Fechtner modellbau.
Bodywork
Container Floor, Sides and Roof: 3mm aluminium plate (watercut)
and various aluminium U- and L-beams. Machined and/or cut manually.
Container crossbeams: Aluminium beams 6x10mm and 6x20mm.
Ejector Plate: 1mm steel plate (laser cut), and 6x10mm aluminium crossbeams.
Tailgate Sides: 1mm steel plate (laser cut), and 5mm aluminium plates (water cut and machined).
Tailgate Crossbeams: Various sizes of aluminium beams, machined.
Packer Plate: 12, 5 and 3mm aluminium plates. (Water cut and machined)
Slide Plate: 3mm aluminium plate (watercut) and 10mm aluminium plate (watercut and machined).
For additional info; just ask. - Auta a dopravní prostředky
![탑건 우라늄 시설 폭파 작전 투입 장면 | 탑건: 매버릭 (Top Gun: Maverick, 2022) [4K]](http://i.ytimg.com/vi/-MMeV2N44hE/mqdefault.jpg)
All the way to one and twenty seconds before I realized it was just a model! Amazing!
Awesome, looking better and better. Love the tail lights and the small control console. A driveable replica... without having to touch it =]
I just made one like this yesterday but it doesn't have an automated packer and no chassis or cab yet. This truck inspired me to make my own
Member watching when I was little in 2014
You know that you have been around a while when people actually feel nostalgia watching your videos! :-D
Can't believe how fast the years fly by! Thanks for the comment!
Ya
@@SeRefuseTrucks mkyiuikkui
I remember watching this when I was 6, great video then, and still is, keep it up!!
Same
Pac-Blox
This is some nice stuff! Hope to see more
Мв
Аанравньавфдшнпшрлдллщшжшшпдттисьлрпоаоалпщгопаоплдгшгшпголпавгпврвропвошопдипгшн
great model...really well done
Constructed and builtit myself. Hydraulics are from Leimbach Modellbau and some chassis parts and the modified Cab come from Wedico.
I remember watching these kinds of videos back when i was a kid, good times
Nice to hear that my videos inspire feelings of nostalgia. Thats got to be some form of success! :-D
this can come in handy for keeping your house clean I love it
AWSOME VIDEO MY FRIEND. I'm starting to work one as we speak, a long project but love it. Thank you for sharing your video.
Jason Leonard Interesting. I wish you the best of luck! Be sure to post videos if you are successful! =)
Very realistic and cool !
+rob c. Thanks! =)
Nice work man... Does it have an operable eject panel and eject cylinder? Is the hopper/packer designed off of any particular (real) garbage truck body?
Great job with this! Now all you need is a waste transfer facility, and you've got both the entire old style "Barbie" and "G.I. Joe" figures trash removal contracts!
Thanks! A transfer facility, with an overhead crane and a compactor would of course be fun. But the space needed for that is a little to large for my current taste. ;)
Ok now i see it Homemade, yuo should start selling them!
LittlePeoplePlay
I want a truck like that all I have is a lego side loader
I buy 1 or 2 perhaps 3 maybe 4 were getting a bit excessive but maybe perhaps 5 this is getting expensive but just maybe 6...
Or more
Waaaauw, good video👍
Thanks a lot! 👍
I remeber watching this at 3. Memories 😭
Same me bro😭
تنتننةمنثمناوتاتتتخننمح8
@@hairieshah5833 عهانخعاعالع6هتن77هعا7هخهععاخعهع76ت8عن76عن7ن7ع
Love it so much
Thanks!
SeRefuseTrucks Did you buy this or did you make it?
Fantastic!
Wijnmuseum Thanks! =)
Awesome! :P
So cool !!!
what a gifted builder of this vehicle !!
Will you make a different truck once this one is done, like a side loader or front loader?
Please let me know if there is a way to communicate with you about how much you would want to build and sell a truck comparable to the one in the video. My boys love watching this truck and ask me all the time how can we go about getting one. This is one of a kind and you’re the man that can make it happen.
If I could have had one of these when I was a kid :( In my day the models, even just the plastic toy trucks were quite limted in variety. Never did find an open rear loader.
+fro0tyl0opy87 I was in the same situation. So I started building small lego garbage trucks instead. =)
What do you use to make the little garbage bags?
Nice !
love to see how you did the ejector in there did you do a multi stage piston ? if so did you make it ?
Where did you buy the trash bags?
The cab is a Wedico F12. I shortened it down to a daycab which fits much better as a garbage truck. There are alternatives to the lego cylinders. Check out my other truck. :-)
Where do u get this? I really want one.
Wow awesome garbage truck i love it!!! Where did you get it from?
He built it
awesome garbage truck do you have the blueprint and what material is it build of
Materials and components can be found in the video descriptions for my newer videos. Unfortunately I don't have the blueprints.
I love where did you get it
You Guys are Devils! They Built This RC!
Hey what length cylinders did you end up using on the compactor blade. Also the ejector. I'm building my own right now. Also are you using a sequence valve for the compaction cycle or just operating each motion from radio in the right sequence
Hi,
The slide panel cylinders have 55mm stroke, with a retracted length of 55+39,5=94,5mm. The packer cylinders have 35mm stroke, with a retracted length of 35+39,5=74,5mm.
The ejector panel cylinder have 145mm stroke, with a retracted length of 145+39,5=184,5. These cylinders are Leimbach with Ø12mm size. The tailgate lift cylinders are standard Leimbach 7mm cylinders, with 50mm stroke. There is no automation for the pack cycle, I just operate the valves in the correct sequence. I prefer electric simplicity.. ;-)
Are you going to build a Norba as well, or are you looking at something else? I'm looking forward to hear and see more of your project! =)
@@SeRefuseTrucks yeah I'll definitely keep you updated. It's not going to be a norba. Most likely it will be modeled after a 90s leach or mcneilus because that's what I grew up around as a kid. I haven't decided yet as I'm still buying everything up. It's going to be based off of a globeliner frame and I'm building the rear scratch out of aluminium I bought. it will be tig welded. My cylinder lengths may be different I just wanted a ballpark figure to design around. Thank you so much for answering.
@@joeyclark789 No problem, I am always excited when I hear that others start similar projects, although most never complete their builds. Both the Leach 2R and the McNeilus rear loaders are really hard to make accurate models of in this scale (1:Tamiya?). The problem is that the base length of the available scale model cylinders are too large in comparison to the stroke. It is also hard to get enough room for the relatively large hydraulic fittings. But of course, all depends on what level of accuracy you require. The Leach Alpha would be relatively easy to make in comparison. Keep me updated on your progress!
That is AWESOME!! How long did it take you to build it?
Thanks! I don't have any exact number of hours. But if the work in cad is included it is a few hundreds of hours.
That's a great looking Volvo Rear loader garbage truck and its a RC model
Thanks! :)
Hahahaaa...dude you made my day! I lmao! That was cool :-)
Nice 👍
Hello friend , it is very cool your truck and my son was crazy about one, in their review saw what was done for you, you agree to share the project this Truck ? as you did the part of brings truck drive system ? Thank you.
w benke Thanks! Not sure that I understand your questions though.. And making drawings for all the parts in this Project would take a lot of time.. Time that I don't Think that I have right now.
very cool
So realistic
where do you get these I want one !!
hey mate ware did you get your rc rubbish truck form mate
? i like it
Dude I am also a big garbage truck fan also nice truck
Thanks! =)
Ä
I never seen this before !
Thanks for taking the time. :-)
Unfortunately, there are only single-acting telescopic cylinders in this scale. So I chose to use an ordinary double-acting cylinder instead. The result is the ability to position the unloading plate anywhere I want to, but I can only use about 60% of the body volume. But the 40% in front of the blade is useful for housing valve blocks etc. If I can, I will show this, but it is difficult as the inside of the body is black. The darkness "hides" the components that shouldnt be there irl.
Where you buy that thing please answer me 🥺 I really like that
Where you buy it?
Awesome
That would look really good in my truck club is it 1/14
How long did it take you to make it
I like that garbage hopper. Can u show his maximal pressure when garbge is full?
I made a video like that recently. But I filled it up with packing chips.
@@SeRefuseTrucks yee, sure
good job then
That would be a really long video. Sorry..
I want one asap
can I buy it
What a load of trash no. You need to make it
Klasse Teil,wo bekommt man sowas her?
Muito legal amei vou comprar um para mim
Thanks a lot! Good luck with your own building project!
I like.
Thanks! :-)
Was the refuse body and packer blade crafted by hand?
Jason Leonard Yes, or sort of... Lasercutting, watercutting, milling drilling etc.
Did you make this truck or did you buy it?
I really want one where does it sell in New York city
How much and were at
Es un hermoso camión 🚌🤩
where the heck did ya get dat :o
Wow cool :D
Thanks! :)
Where did you get your truck? Awesome
Thanks! It is homemade, and I have uploaded videos that provides more info!
Hi,
I am sorry, but the painting process has taken more time than expected. The weather is just too good right now to be standing indoors inhaling paint-fumes, but hopefully it will be finished tomorrow. ;-) I will upload videos as soon as I can.
It is homemade!
It’s really good!
how did you make the packer work like that?
Exitsigncollection Hi, It is hydraulically powered. The system runs at 15bar and the Components can be found at Leimbach Modellbau.
Nice
How did you make it
WHERE CAN I GET ONE???????
where did you have this built? My Husband wants one.
+Ariel Pulliam It is homemade. Some parts can be bought (hydraulics and drive line), but the bodywork and the short version of the cab is homemade.
@SG LegoBuilder Yes of course! :-)
WHERE CAN THE TRASH CART BUY
SeRefuseTrucks ㄝㄟ˙ㄢ
SeRefuseTrucks 建造啊啊啊痾痾次我ㄔˉ
( ͡°ᴥ ͡° ʋ)( ͡°ᴥ ͡° ʋ)( ͡°ᴥ ͡° ʋ)( ͡°ᴥ ͡° ʋ)( ͡°ᴥ ͡° ʋ)( ͡°ᴥ ͡° ʋ)( ͡°ᴥ ͡° ʋ)くコ:彡くコ:彡(´・(oo)・｀)
Where did you buy this?
were can i get one of those
where you get this truck
I wanna buy this😍😍😍
Wow
how do i purchase one?
Is there any trucks like this to purchase. My nephew really wants a trash truck that does exactly what this one does.
Unfortunately no, there are no comparable trucks on the market. The closest thing would be the Haller X2 rear loader from bruder.
Yes
nice
were did you get the truck?
Homemade to some extent, other parts were bought. Check my newer video descriptions for details.
where can i get 1
Where can I buy this garbage truck to buy?
請問這台垃圾車要去哪邊買才買的到？
請問這台垃圾車大約多少錢？
How much is this garbage truck?
where did you get it from or is it custom
+Alfie Whittaker It is homemade. Some parts can be bought (hydraulics and drive line), but the bodywork and the short version of the cab is homemade.
how much did this cost?
good
were do you get it?
He built it by himself
Because I havn't been totally finished with it. But I will upload new videos next week. And this time I mean it! :-)
How do you make the garbage bags
WOW
Dove lo hai trovato??