100% Fix Battery Warning Message + Battery Health For iPhone 11/12 Series With JC Built-in Board
Vložit
- čas přidán 7. 09. 2024
- In last video, we have removed battery warning message and modified battery health data with Qianli battery corrector. But the solution is not perfect, because we can see difference from physical appearance compare with new battery.
Elekworld works closely with this, and we found a built-in battery board solution. it can recover battery appearance like brand new and works on both iPhone 11 and 12 series , but it also require higher repair skills.
Now let’s fix it with iPhone 11 battery as example.
Battery Cell for iPhone 11 (6.1")
www.elekworld....
0.1mm Copper Soldering Wire
www.elekworld....
3GOA Portable Battery Spot Welder, w/retail package
elekworld.com/...
JC-V1S Multifunction Programmer with True Tone/Battery/Fingerprint/Dot Matrix Detection Boards for iPhone 8-12 Pro Max, w/retail package
elekworld.com/...
JC Built-in Battery Repair Flex for iPhone 11
elekworld.com/...
Ecooper Lengthened Straight Pointed Tweezer, ET-12, w/retail package
elekworld.com/...
For more Repair parts&Tools and Tech support, please visit:
Website: www.elekworld.com
Facebook: / elekworldshop
Instagram: / elekworld
Twitter: / elekworldl
See. This beautiful voice and Presentation is attracting more audience than other old videos.
Have fun doing the jump wires and isolating them! I love it........( throwing the battery against the wall !!!!!!!) :D ..... yeah
LOL, that's funny bro.
⁰⁰0
Great Video. I have used this method to replace my iphone 12 Pro Max battery that was at 73% and so was showing the service message 'your battery health is significantly degraded'. I replaced the battery and set the health to 100% and cycle count to zero. Even though the health is showing as 100%, the service message is still there? Do you know why this may be? and how do I remove it? Thanks
Could you please do a video with the qianli inter flex? Thank you
Yes it’s possible to make it in future, we can make it once we got everything.
Good job
This is very good video. I have a repair shop and want to learn motherboard repair. I always bring the phones of my customers to somewhere else. How can I take a course on motherboard and where van I buy the needed tools? Thank you for doing this great job.
No worry, because we are launching more baord level repair tools course and show you how to make it happen. Check this: czcams.com/video/m5BvDfB33i4/video.html. Pls sub us and stay tuned.
will the battery drop to 99% or stay at 100% all the times?
It will drop just like genuine battery.
Hi thank for your video if we do all things in this video do we have battery my be change in 3utools chek devise?
Yes, will show new data in 3U tools.
As we know from 14.6 os starts judging battery health it self. What if we only replace battery cell. After full flash or few days battery health will go up again. Have you tested this one?
I have also heard from customers that their battery health starts going up in few days when they charge with slow chargers like 1 amp charger. I guess if we replace battery cell and flash it will also work or in 3 4 cycles os will determine that battery health is greater than what it is showing so in this way it may go up
@@iphonerepairinglab5098 thanks for sharing, we haven’t heard this before but will pay attention on this.
awesome video, great tutorial !!!
Have you fond a way without tag on flex ??
Still not yet by now.
Hello… what is the meaning of NC, ND, SC and SD?
Great video. Glad we can bypass it
Yes, best solution by now.
but guys im sure somewhere out there , there are some smart Software or IT Guys uploading the serialized Iphone components, especially ones sold online for the bms , lcd etc for us to download, then add to the programmers and then just write it to every serialized component right....or is there something making this impossible?
Yes, It's Apple's software iOS who making this impossible. 😂
If you don't have original battery or face ID jv1s box can't help?
No it can't. In this method you must have original(genuine from apple) battery, then this works.
Really cool! Good job
Thanks for comment 😊
so my battery health in iphone is 100% but in 3utools shows the old data, how to fix this?
I don’t understand something here, after jumping wires on those two battery boards what comes next ?
Connect the genuine battery board+built-in board with new battery cell.
hi. @Elekworld. i would ask something regarding Iphone XS battery waring message actually do same way process remove the genuine battery board connector and then i do transfer to aftermarket battery when i'm done. i check first the battery if the battery health is show, it's show battery health but the battery health is not 100% but that one is new battery when i use JCID program to modified battery health data and then i install the new battery suddenly battery health not show anymore. please advise me what i need to do maybe i do wrong way to modified battery health using JCID program. thanks in advance responding to my message is highly appreciated.
Hi Fejz, two suggestions for you, hope it helps:
1- new battery cell with genuine battery board doesn't show 100% is normal, because it's old genuine battery board, so the data is from old battery.
2- If you can't revise the battery data successfully, probably bcuz you didn't install a 3rd party battery before you revise the battery. It's critical step that must have to do, check video from here: czcams.com/video/q7_GLdJ6Oso/video.html.
I have a problem every time I soldered the cell to the new battery it no longer works could you help me with a tip!!!
I've been watching the video more than 100 times I'm interested in learning, but even so the original flex burns
I need help please !!!!!!!
overheat killed the chip
Hello! How to solder JC built in flex for iPhone 11 Pro?
Same procedure bro
bro we are normal tecnetion 😀 how we can fix this problem
It doesn't matter, because we are launching more baord level repair tools and show you how to make it happen. Check this: czcams.com/video/m5BvDfB33i4/video.html. Pls sub us and stay tuned.
Same question in my mind you asked at the end! What will happen if we just modify the battery data without changing the actual battery cell?
It will happen anyway, cause the change of cell don't modify anything in the process, it is just for the service that you have to do, otherwise you'll do something senseless; modify data without changing the actual battery. The idea is that the percentage reflects the state of a new cell. Regards.
Was using older method (with attachments additional cable) but after soldering a bms board to new battery it doesn't work 😔
Is there way to somehow restore it? Maybe it in some shortcircuit state or something? I have two of broken bms for two phones
Was using Quanli method and 50 or so phones was okay, but sometimes it's just can't to turn on when I soldering a new battery
Hey bro, maybe here it's the reason: czcams.com/video/q7_GLdJ6Oso/video.html. Pls take a look.
U need to recharge the battery again. Just plug in a charger and then hr battery will work again
What happens if you just solder on the original board to the new battery and reset the health and cycles? Is it possible?
It will just show the original battery data, and data can't be revised.
@@Elekworld okay. Thank you for the info!
Can i do this with every Batterie?
Nope, only from and above iPhone 11 series.
Why do you do this way I don't understand
Hi, when I try to change battery health with Jc V1s I get an error saying no repair cable connected. :(
There are many possibilities: 1- JC V1S system not upgraded to latest; 2- Battery flex not connected 100% completely; 3- change the other battery check if JC V1S has problem, or change another battery baord check if board has problem...
Bro please help me i have iphone xr dropped in water then face id stopped working it shows a probleme was detected in truedepth camera face id disabled this probleme is it fixable or ?
Yes, it is fixable. Please check with your local repair shop, they might help you on this.
take risk to modify... it dangerous dont know when will blow it
It won't happen if we handle professionally like the video shows.
I weld old battery board to new battery but it shows old battery percentage. I have 80% old battery percentage. Now after welding old battery board to new battery it shows only 80%. Will it affect the screen time? Or I can use the battery to full efficiency?
The old battery board only fix non-genuine battery warning message, if you want to have 100% new battery percentage, need process like the video shows.
@@Elekworld thanks for the response. Am asking about the new battery which is having old battery data. Can I use the new battery to full capacity even it shows old battery capacity? I don’t need 100% in new battery.
@@latheefthemass7748 of course, new battery is 100% capacity, the 80% is just the data iPhone recognize from old battery board
@@Elekworld thanks for the info 🤝
¿Cómo es que el programador JC te detecta la batería sin utilizar el flex?
Not quite sure what you mena, but if you mean connect battery to JC programmer directly here: czcams.com/video/q7_GLdJ6Oso/video.html, it because there are exclusive battery daughter board to use.
@@Elekworld Si , me refiero a eso mismo, pero en el minuto 1:34.
¿Qué no se si tienes el flex de la batería secundaria conectado?
@@jonathanfernandez4438 Nope, at that time the battery is same as it was sold inside iPhone, we do nothing on it yet.
apa berfungsi di baterai after market tanpa board baterai original
Tanpa papan baterai asli, Anda mungkin dapat merevisi kesehatan baterai, tetapi Anda tidak dapat menghapus pesan peringatan baterai.
Hello. I bought a battery with its flex. I did the same process to erase the cicle and the efficiency make a backup from the original battery and copying to the aftermarket one and the iphone does not show me any message. However, ti says the old % of health instead of the 100%. Any help on this? or it is necessary to solder the original flex into the other battery? Thanks a lot guys
Look at end of videos. You must install a non-original battery before, so that the battery service will appear. After that you can remove the non-original battery again and install the battery that you have modified.
Revised properly. Also need to plug in another battery first in order to activate it
Where is NC and ND in iPhone SE 2020 battery Flex (BMs)?? It is really important lines?
Can I use 11/11 pro flex to iPhone Se 2020 ?
Hi Lucas, not quite sure what you exactly means. But definitely iPhone 11/11 Pro battery flex can't be used on iPhone SE 2020, because not only the battery FPC connectors not same, but also inside data are different.
@@Elekworld Maby data is different but battery connector is the same i check before I write this post
So You have any idea to iPhone 2020 ? It’s same battery error message in settings
@@lucasszeyk3718 Ok, now I see why you ask that. Actually for iPhone SE 2020, the only way to remove the warning message is replace the genuine battery flex on the new battery. Check this link for details: czcams.com/video/sjOCID0IN5g/video.html.
If you want to correct the data of battery health etc, by now there is no device or programmer can do that. Because Qianli or JC only developped flex/programmer for iPhone 11, 12 lineup.
@@Elekworld ok thank You
So I can only insert new battery with old one flex - data (cycles and effective) stay without possibility to change.
So We are waiting for new stuff from jcid etc ;)
Greetings
Thankfully
Will this still work with the newest iOS software ?
Yes, because it's genuine battery baord so iOS will always recgonize it.
@@Elekworld thanks for being responsive
Can you remove the JC flex after complete the process ?
Nope, the new data was written into new JC built-in flex, if we remove it, the data will show genuine data again.
hello, what brand is the spot welder? it looks like a new alternative to the station which is much bigger
The brand is: 3GOA, check this link for more detail: elekworld.com/shop/productinfo.aspx?proid=15187&categoryid=287.
If you want to order it, pls email elekworldservice@gmail.com for price.
And what If I dont have original battery?
Then you can do neither of remove non-genuine battery message nor revise the battery health.
Is this still working in iOS 15?
Still works, bcuz the BMS has been genuine one, which iOS will always recgonize it.
What if original battery was lost?????
Then there is no battery board to translate, the new battery will pop out “important battery message”, but battery power supply still works
Is it working on iOS 15?
I think it will, Marcin.
Address
Hey man, know more details pls message us: wa.me/8613590142302
It’s not easier than previous one
This one requires soldering and it’s double time wasted
Yes, both method can fix battery warning message&health, the difference is new JC Built-in flex can't be distinguished from appearance after repairing.
@@Elekworld So if an apple technician or anyone were to repair an iPhone (screen or battery) where the battery was changed using the Qianli method, it would be easy for them to see the extra flex extension. But with the JC method, no one would know?
@@matthewJamesKendell yes, unless they peel off battery board film.
@@matthewJamesKendell with JC method, it's hard to know it was reformed unless they peel off the battery board films.
The average repair technician cannot perform this repair 😂
We will launch more video from 0 to 1 level for you, pls stay tuned for update, bro.
@@Elekworld can u send me link to shop with batteries for iPhones?
@@ThePawciohd Hi Paul, here is the link of battery cell in video: www.elekworld.com/shop/productinfo.aspx?proid=14933&categoryid=113.
But for better price and more models choices, please reach service@elekworld.com for exclusive 1 on 1 service.
Bunu Türkiye’de yapacak bir babayiğit yokmu
👍👍👍👍👍👍👍
I wish the folks that made these close up videos would cut their freaking fingernails.
Thx for advice, bro. Actually as technicians, they keep it bcuz sometimes the fingernails is the best and most convennient tools to disconnect fpc connectors, check components details etc.
In last video, we have removed battery warning message and modified battery health data with Qianli battery corrector. But the solution is not perfect, because we can see difference from physical appearance compare with new battery.
Elekworld works closely with this, and we found a built-in battery board solution. it can recover battery appearance like brand new and works on both iPhone 11 and 12 series , but it also require higher repair skills.
Now let’s fix it with iPhone 11 battery as example.
Battery Cell for iPhone 11 (6.1")
www.elekworld.com/shop/productinfo.aspx?proid=14933&categoryid=113
0.1mm Copper Soldering Wire
www.elekworld.com/shop/productinfo.aspx?proid=6935&categoryid=283
3GOA Portable Battery Spot Welder, w/retail package
elekworld.com/shop/productinfo.aspx?proid=15187&categoryid=287
JC-V1S Multifunction Programmer with True Tone/Battery/Fingerprint/Dot Matrix Detection Boards for iPhone 8-12 Pro Max, w/retail package
elekworld.com/shop/productinfo.aspx?proid=15188&categoryid=287
JC Built-in Battery Repair Flex for iPhone 11
elekworld.com/shop/productinfo.aspx?proid=15189&categoryid=287
Ecooper Lengthened Straight Pointed Tweezer, ET-12, w/retail package
elekworld.com/shop/productinfo.aspx?proid=12339&categoryid=572
For more Repair parts&Tools and Tech support, please visit:
Website: www.elekworld.com
Facebook: facebook.com/Elekworldshop/
Instagram: instagram.com/elekworld/
Twitter: twitter.com/ElekworldL?lang=en