I LOVE YOUR CHANNEL!!!!!! I have a severely short attention span and have a had time sitting with a video long enough to retain the information. But MAN, this is the best class i’ve ever taken on CZcams University. Informative, efficient, and great visuals for the explanations. Thank you thank you! I subscribed immediately.
Thanks for this rundown, I have found similar results in my S6 rig experimentation. Best thing I did was go from zback to nitze quick release back to be honest. Thankyou for the video
Great video, I love the shape of the Zcam as it makes it easy to Rig and the weigh would be distributed nicely. I’m waiting for Blackmagic to learn a thing or two from Z.Cam . 🔥🔥🔥🔥🔥🔥
Honestly, I love it. For the longest time I kept the handle on the side of the camera like most people seem to do, but it always felt awkward and in some cases, uncomfortable.
I have the same gripes with the Z Back as well, but you can't really complain with the extra mounting spots haha. I'll be making the video on my Z rig this weekend.
Looking solid! With the Sdi port locked in behind the camera do you feel there is a risk of the port being fried when changing battery if both the monitor, transmitter and camera are all being powered off the v mount? Curious to know because I’m looking to order the sdi module myself. Cheers!
I follow SDI protocol that ARRI and RED put out. I plug the accessories SDI cables in after they've been powered on, and then power them off to remove the cables.
Looking to become a hobbyist and don’t want to spend more than $4,000 all in. I wanted something I could grow into. Was looking at the sigma fp, Bmpcc6kpro, or zcam s6. Want a run and gun, around NYC and vacation shooting style. Any suggestions?
The BMPCC 6K Pro would be a really good camera for someone just starting out. Plenty of room to grow. I've never used the FP but it doesn't entice me at all.
Thanks for the video !! I have a question, How do you press Record on your Z Cam if you are using your right hand to pull focus ? asking because I have this SmallRig Rosette side Handle with REC/ Stop funtion that solve this issue for me ! It works for my Sony A7IV and Z cam S6 cameras ! ( Model # 3324 ) Newest version
I'll usually hit record first. Some like to frame up their shot and focus but I don't. If I could get a left handed REC/Stop handle i'd be thrilled. I had the Clutch handle but returned it.
I also tried making a diy start stop for this rig but you need some sort of board interface with timings. Apparently zcam uses Sony LANC protocalls, sooo. I would find one that works for Sony and buy it off Amazon so returning is easy if it doesn't work lol. Sorry for the chatter, video was great!
@@DaveyG davey, I m actually using a tilta handle from my previous A7s tilta rig (unfortunately without using start /stop function). you think with the right cable its possible to trigger the z cam?
@Driven Films thank you for the great content that you share with all of us, now I have a question. between the Portkeys monitor and this shinobi 7 to control the Z cam. why you pick the shinobi 7?
Looks like ZCam needs to make a better media door for their next gen of cameras. Yours looks like it's getting beat up in normal use. Also, rocking that camera southpaw- good on yah, you leftie ;)
Hi' Joe, quick question for you. Today's July 2022; I'm considering investing in a Z cam like the one you show here, and I was wondering if I will also need to upgrade/update my computer for the 4K/6K editing side of this new gear. I'm currently using a Dell with Intel i7, SSD hard drive and plenty storage room for Premiere Pro. Any tip or advice greatly appreciated! (and IF I will require a new system, what will you suggest/recommend?) New to your channel, thank you so much!
Hey! Thanks for watching. You SHOULD be ok with editing the ProRes footage however you might need to use proxies. Luckily, the z cam e2 models can record internal proxies for you.
I love the rigging and it has inspired me a lot but I do wonder why you have so much rigging on the operator side/have no defined direction for handheld.
@@joenicklo so when I'm working as an AC typically we define the left side of camera as the operator side. Everything that isn't a control interface stays on the right side of camera. It's just easier to operate and less stuff gets in the way. I feel like the peripherals are just on both sides without much thought.
@@benchxwychua443 Yes, I know that, but I'm not sure how else I'd rig this. The accessories are on the right, nothing blocks the function buttons on the operator side. The only thing I've got on the left side is my mic, which is not in the way of the function buttons.
Can you tell me what the distance is from the center of the 15mm rods to the center of the lens? I'm looking for something that will have the center of the rods 85mm from the center of the lens. Thanks.
So the z back has been completely discontinued to mount the dual sharkfin mount to. I’ve tried ordering three different places. They all say the same thing. Take the order. Refund because it’s no longer sold. Do you have any idea for another option?
Hey, sucks to hear!!! Get the same battery plate I linked plus look up Nitze part numbers E2-FS-V3, E2-FS-SV4L or E2-FS-V3L. You'll attach that to your camera directly then the V-mount plate to it. Your sharkfin will work with that :)
@@joenicklo thank you so much! I may have found one source that has it but will use this in the event they send the same message and refund. Love the content and help with the build!
I forgot exactly how to fix it but there is a solution that someone posted on the Z Cam FB group. Just search "HDMI latency" and it'll pop up. I've since sold my Z Cam and switched to the RED Komodo.
@@joenicklo okay but we can swap battery before putting on the cage right? And when you have to remove it, first remove the cage then remove the battery right?
Get premium office and desk accessories from Grovemade: bit.ly/3r7wuNc
I LOVE YOUR CHANNEL!!!!!! I have a severely short attention span and have a had time sitting with a video long enough to retain the information. But MAN, this is the best class i’ve ever taken on CZcams University. Informative, efficient, and great visuals for the explanations. Thank you thank you! I subscribed immediately.
I use the tilta v mount holder as the back of the z back plate so i can slide it open
Nice!
This is a typical example of prayers answered.
Great breakdown with thorough explanations for each item. Thanks for putting the time into this one.
Coming back to this because now I’m looking into getting a Zcam.
Zcam f6 pro is coming soon
@@joenicklo Don’t have the money for it yet. Grabbed a used 4k one instead.
Thanks for this rundown, I have found similar results in my S6 rig experimentation. Best thing I did was go from zback to nitze quick release back to be honest. Thankyou for the video
Thanks for keeping us small handed people in mind, Joe. That was a real…stinger! loll
Little baby hands 🙌
So sad as of today they discontinued the production of Z Back, but I’ll hunt it in EBay
Damn! That’s sad to hear. Hopefully you find one on eBay.
Great video, I love the shape of the Zcam as it makes it easy to Rig and the weigh would be distributed nicely. I’m waiting for Blackmagic to learn a thing or two from Z.Cam . 🔥🔥🔥🔥🔥🔥
You and me both!
Exactly why I’m getting rid of my black magic to get parts for my Zcam. 😂😂😂
brooooo side handle on the rods is clutch! trying that for my FP rig!
Honestly, I love it. For the longest time I kept the handle on the side of the camera like most people seem to do, but it always felt awkward and in some cases, uncomfortable.
I have the same gripes with the Z Back as well, but you can't really complain with the extra mounting spots haha. I'll be making the video on my Z rig this weekend.
Looking forward to seeing it
Thanks again Joe! You da man! Always enjoyable!!
You’re welcome! Thank you for watching :)
that's a quality rig right there.
Thank you!
Very articulate and clean presentation as usual. Awesome rig setup. 👍🏽
Thank you 🙏
Thanks for this thoughtful and comprehensive rigging tour. Do you have any ground loop concerns with all the powered accessories?
No concerns. I just turn my camera on before connecting everything else.
Nice vid dude!
Thanks!
What a unit. Greta video!
You'd think I'd have Schwarzenegger biceps with this thing eh?
Love to see it.
Solid production once again! Loving that Z Back. Will be looking into that for sure.
I believe a v2 is coming soon
What is your power-up sequence to keep the SDI or HDMI ports from burning out due to using a common power supply for both the camera and monitor?
I never followed SDI protocol on the z cam. I don’t think it had any issues/concerns bc it wasn’t 12G SDI
Looking solid! With the Sdi port locked in behind the camera do you feel there is a risk of the port being fried when changing battery if both the monitor, transmitter and camera are all being powered off the v mount? Curious to know because I’m looking to order the sdi module myself.
Cheers!
I follow SDI protocol that ARRI and RED put out. I plug the accessories SDI cables in after they've been powered on, and then power them off to remove the cables.
💪🏾💪🏾💪🏾
There’s just something about Z Cam rigs… hmm 🤔
Right? 😂
Looking to become a hobbyist and don’t want to spend more than $4,000 all in. I wanted something I could grow into. Was looking at the sigma fp, Bmpcc6kpro, or zcam s6.
Want a run and gun, around NYC and vacation shooting style. Any suggestions?
The BMPCC 6K Pro would be a really good camera for someone just starting out. Plenty of room to grow. I've never used the FP but it doesn't entice me at all.
Thanks for the video !! I have a question, How do you press Record on your Z Cam if you are using your right hand to pull focus ?
asking because I have this SmallRig Rosette side Handle with REC/ Stop funtion that solve this issue for me !
It works for my Sony A7IV and Z cam S6 cameras ! ( Model # 3324 ) Newest version
I'll usually hit record first. Some like to frame up their shot and focus but I don't. If I could get a left handed REC/Stop handle i'd be thrilled. I had the Clutch handle but returned it.
I also tried making a diy start stop for this rig but you need some sort of board interface with timings. Apparently zcam uses Sony LANC protocalls, sooo. I would find one that works for Sony and buy it off Amazon so returning is easy if it doesn't work lol. Sorry for the chatter, video was great!
@@DaveyG davey, I m actually using a tilta handle from my previous A7s tilta rig (unfortunately without using start /stop function). you think with the right cable its possible to trigger the z cam?
@@der-uhlig I think it might be possible !
@@randrmedia8338 not sure it's going to change what the handle sends out. But cables are cheap.
First! Love these videos!
Thanks for watching.
In your opinion is this camera reliable for corporate/event gigs where you only get one chance? recording presentations etc
It’s absolutely reliable, but watch my two reviews on the camera system. I go over some of the pros and cons of the Z cam E2 lineup.
@Driven Films thank you for the great content that you share with all of us, now I have a question. between the Portkeys monitor and this shinobi 7 to control the Z cam. why you pick the shinobi 7?
You’re welcome. I didn’t like the camera controls on the portkeys, plus the Atomos is an overall better monitor…way brighter too
Looks like ZCam needs to make a better media door for their next gen of cameras. Yours looks like it's getting beat up in normal use. Also, rocking that camera southpaw- good on yah, you leftie ;)
Yep. You're right about that.
Where did you get the M5 hex spacers/standoffs? I am finding it surprisingly difficult to find the right ones.
Amazon: geni.us/68tZxUe
Thanks! So it’s M3 and not M5?
Is it the M3 or M5 spacers?
@@shaynedavidson7064 M3. He says M5 in the video, but that’s incorrect.
well there's not a link to the small wifi antenna.
Ah sorry I missed that
What Cinema lens did you use on that camera what zoom lens was that
That is the Tokina 11-20. Check out the review I did on it:
czcams.com/video/IA6_BiO2MZw/video.html
Hi' Joe, quick question for you. Today's July 2022; I'm considering investing in a Z cam like the one you show here, and I was wondering if I will also need to upgrade/update my computer for the 4K/6K editing side of this new gear. I'm currently using a Dell with Intel i7, SSD hard drive and plenty storage room for Premiere Pro.
Any tip or advice greatly appreciated! (and IF I will require a new system, what will you suggest/recommend?) New to your channel, thank you so much!
Hey! Thanks for watching. You SHOULD be ok with editing the ProRes footage however you might need to use proxies. Luckily, the z cam e2 models can record internal proxies for you.
I love the rigging and it has inspired me a lot but I do wonder why you have so much rigging on the operator side/have no defined direction for handheld.
What do you mean “no defined direction”?
@@joenicklo so when I'm working as an AC typically we define the left side of camera as the operator side. Everything that isn't a control interface stays on the right side of camera. It's just easier to operate and less stuff gets in the way. I feel like the peripherals are just on both sides without much thought.
@@benchxwychua443 Yes, I know that, but I'm not sure how else I'd rig this. The accessories are on the right, nothing blocks the function buttons on the operator side. The only thing I've got on the left side is my mic, which is not in the way of the function buttons.
@@joenicklo i feel like for good audio you would want the mic on the other side then
Can you tell me what the distance is from the center of the 15mm rods to the center of the lens? I'm looking for something that will have the center of the rods 85mm from the center of the lens. Thanks.
Sorry, I've sold my Z Cam however Nitze makes a cage & baseplate thats 85mm
@@joenicklo thanks
So the z back has been completely discontinued to mount the dual sharkfin mount to. I’ve tried ordering three different places. They all say the same thing. Take the order. Refund because it’s no longer sold. Do you have any idea for another option?
Hey, sucks to hear!!! Get the same battery plate I linked plus look up Nitze part numbers E2-FS-V3, E2-FS-SV4L or E2-FS-V3L. You'll attach that to your camera directly then the V-mount plate to it. Your sharkfin will work with that :)
@@joenicklo thank you so much! I may have found one source that has it but will use this in the event they send the same message and refund. Love the content and help with the build!
How good is the z raw?
That's a really tough topic to discuss in a youtube comment. I'll just say that I don't use it and I'm really sad about that.
@@joenicklo thats sad :( if zraw was good i would switch from pocket 6k to it for its shape
Hey mate, just got my S6G today. Unfortunately I’ve noticed a big hdmi delay. You had the same problem? Is there a way to fix this? Thanks!
I forgot exactly how to fix it but there is a solution that someone posted on the Z Cam FB group. Just search "HDMI latency" and it'll pop up. I've since sold my Z Cam and switched to the RED Komodo.
You mixing somehow frame rates? all the b roll stutters.
That's the slider. It stutters when using macro movements.
Can we mount NP battery with Zcam back?
Absolutely, you just can’t swap them easily.
@@joenicklo okay but we can swap battery before putting on the cage right? And when you have to remove it, first remove the cage then remove the battery right?
Is
this a global shutter
No. That’s the S6G model
@Driven Films I am wondering if I should get the model that has the global shatter or if should I get the Red komodo, what is your opinion.?
I chose the Komodo over the S6G if that helps.
@@joenicklo ues I will go that route thanks a million