Come to think of it after experiencing with head motors on lifesizes, I don't think you really needed to completely take him apart in the first place. I think all you had to do was locate the motor on the shoulders, take it out and replace it.
On the dancing ones, you actually do have to take it apart because the only way to access the screws to remove the motor to completely flip the head mechanism over. I’ve repaired tons of lifesize Gemmy animatronics and when I had to replace the belt for my Dancing Santa’s head, I had to remove the body shell and everything so I could replace the belt.
The dancing motor started smoking and went out on my Santa. I found a replacement motor that fit perfectly but needed 12v, so I also put in a power boost to up it to 12v. It still didn't work. When I tested the output voltage from the cable (blue and green wires) on Santa, I am getting less than 1v when it peaks. What should the output voltage be on Santa's cable? Any help is appreciated.
Hi I have a UK 2006 santa model but motor gone any suggestions as to where I could obtain a new motor in UK or order from USA pay carriage please Frank
On the neck motor you are working on underneath is a bigger motor ran by a belt that moves his arms and body mine is blown out what size motor do I ask for does your motor say what size it is I know it's a 9 volt dc but what speed do I get .
Just got our Santa out this year and he starts to sing and dance, as he should, then about 30 seconds later, he just stops. Do you have any suggestions? Thanks in advance.
Any suggestions on a Santa that is in the down position and I can't get him to pop up. I have pushed down on his shoulders from every angle and h e just won't pop up.
I’m getting a spinning snowflake snowman for my birthday end it is going to have a split gear and spinning arm how do I fix it’s spilling arm who it will work like it was bought off of Amazon not you not used brand new
Oh no lol, I wasnt that good in school, my grandpa and dad use to fix things sometimes, I more of learned how to replace the split gears from the gemmy fan
pov: you hear your motion sensor animatronic singing in the other room...
your home alone
Come to think of it after experiencing with head motors on lifesizes, I don't think you really needed to completely take him apart in the first place. I think all you had to do was locate the motor on the shoulders, take it out and replace it.
On the dancing ones, you actually do have to take it apart because the only way to access the screws to remove the motor to completely flip the head mechanism over. I’ve repaired tons of lifesize Gemmy animatronics and when I had to replace the belt for my Dancing Santa’s head, I had to remove the body shell and everything so I could replace the belt.
The dancing motor started smoking and went out on my Santa. I found a replacement motor that fit perfectly but needed 12v, so I also put in a power boost to up it to 12v. It still didn't work. When I tested the output voltage from the cable (blue and green wires) on Santa, I am getting less than 1v when it peaks. What should the output voltage be on Santa's cable? Any help is appreciated.
My motor isn’t turning for the dance feature. Any suggestions? And the head moves to the left and not to the right. And the lip moves sometimes.
Hi I have a UK 2006 santa model but motor gone any suggestions as to where I could obtain a new motor in UK or order from USA pay carriage please Frank
Thx, I repaired it!
Any ideas on where I can get a good replacement motor for my life-size 5 foot Santa? It's for the dancing mechanism
uxcell 7100 RPM DC 9V 1.5A 61.2g.cm Micro Motor for Cars DIY Hobbies
On the neck motor you are working on underneath is a bigger motor ran by a belt that moves his arms and body mine is blown out what size motor do I ask for does your motor say what size it is I know it's a 9 volt dc but what speed do I get .
I need the plastic sprocket from inside from motor unit. Any ideas
Can you send a link to the video you were watching?
I’m looking for life size gemmy Santa motor. Does anyone know a source. Thanks
Just got our Santa out this year and he starts to sing and dance, as he should, then about 30 seconds later, he just stops. Do you have any suggestions? Thanks in advance.
Make sure you are using the correct transformer. It not only needs to be the right voltage but also enough amps....probably 1.5A or 2A
9v 1.5A
Maybe he got fried
@@MarkFisk1, thank you. You were correct, but for some reason I never replied years ago. This just happened to pop up.
@@camiloobandomartinez8392 ,we were using the wrong adapter. Two years later and he's still entertaining us and scaring toddler grandchildren. Lol
hey what does a speaker on a life size animatronic look like
Where did you get the motor mine just went out and I can’t find them anywhere?
Kenny Harkcom The 9v motors are really hard to find
this will do the trick uxcell 7100 RPM DC 9V 1.5A 61.2g.cm Micro Motor for Cars DIY Hobbies
I bought one off Facebook marketplace and the head doesn’t turn do you know what’s wrong with it
It’s either the gears or the motor. Take of the head and see if see something is spinning, if so yo7 have a broken gear.
Split gear or fried motor
Any suggestions on a Santa that is in the down position and I can't get him to pop up. I have pushed down on his shoulders from every angle and h e just won't pop up.
Found you again lol
@@animatedchristmascollector3754
Yes lol... I have been trying everywhere to get h help lol
Tell me when you solve the issue!
-Gemmy Bear
@@animatedchristmascollector3754 fingers crossed it will be tomorrow 🤞
@@AussieFIag hahaha thought I’d check back since I needed to fix mine néeded some tips and found you again! How did it go this year?
How do you keep the motor in place mine is loose the one that moves the body
There’s supposed to be two mini screws that hold the motor in.
where would they be located?
@@HolidaySpirit04
@@legionfrog313 For the body motor, it slides into the slot and the slot has two mini holes which is where the screws would go.
i never saw them, i think mines broke for screws. got pics?@@HolidaySpirit04
I’m getting a spinning snowflake snowman for my birthday end it is going to have a split gear and spinning arm how do I fix it’s spilling arm who it will work like it was bought off of Amazon not you not used brand new
Where did you get new motor?
It's actually his original I think
The one Bailey sent was bad
uxcell 7100 RPM DC 9V 1.5A 61.2g.cm Micro Motor for Cars DIY Hobbies
jenial
Mine will not work this year. I plug it in and press the button and nothing! Any ideas on what it could be? Does the switch go bad?
Its possible I guess, but did you make sure it wasnt on the microphone setting? And make sure you didnt use any voltage higher then 9 volts?
How did you learn how to repair all this stuff you must have study hard in school
Oh no lol, I wasnt that good in school, my grandpa and dad use to fix things sometimes, I more of learned how to replace the split gears from the gemmy fan
Lol
28:33
You do not need to use the vulgar language and bring the Savior Jesus into it..
brenda morgan what?
Uh oh! We got a Karen in the house!
oh god a karen
Thank you Brenda