I had no power on any pin, but jammed a small wire behind the green wire just to see. I connected to +of cell 1 and phone instantly connected. After removing the new power wire it kept working, maybe it just needed a jump.
I used those connectors flying and building drones. The pins can easily get bent. Or wire isnt connected. You can bend back, resolder or replace wire connector with good one, splice. Or re run. Splicing easy. Right were wire connects to pin.will brake from bending. Looks attached. Can tell by bending slightly. If tension good stop bending. If lose easy to bend. Then bad
I had 5 dongols go dead in 6 weeks. I gave up and bought touch screens. The dongles will burn out easy. I got 2 new ones and neither worked . I held them in my hand and pulled them in. The both got so hot I could not hold them so I unplugged them and returned them. I have 1 of 6 six working but I don't use it. Those dongles are trash.
I supplied 3.2V to the green wire, and it allowed me to connect to the bluetooth, but it did not display any details, and the module quickly strated to overheat and then turn off after 30 seconds. Any suggestions?
I have the same 100A 20s14p on a ebike battery It Was charging lastnight, i change a few settings in the app While it was charging Its now 76v fully charged when i test it with the volt meter but the bike wont turn on and i have NO connection with the Bluetooth dongle to reset the settings
I had no power on any pin, but jammed a small wire behind the green wire just to see. I connected to +of cell 1 and phone instantly connected. After removing the new power wire it kept working, maybe it just needed a jump.
Thanks 🎉
I used those connectors flying and building drones. The pins can easily get bent. Or wire isnt connected. You can bend back, resolder or replace wire connector with good one, splice. Or re run. Splicing easy. Right were wire connects to pin.will brake from bending. Looks attached. Can tell by bending slightly. If tension good stop bending. If lose easy to bend. Then bad
How to prevent bluetooth in off mode , so not need more to push buttom in BT module, I need bluetooth always on , thankyou
I had 5 dongols go dead in 6 weeks. I gave up and bought touch screens. The dongles will burn out easy. I got 2 new ones and neither worked . I held them in my hand and pulled them in. The both got so hot I could not hold them so I unplugged them and returned them. I have 1 of 6 six working but I don't use it. Those dongles are trash.
Turn the camera the right way...
Unplugging it n plugging it back don't work
I supplied 3.2V to the green wire, and it allowed me to connect to the bluetooth, but it did not display any details, and the module quickly strated to overheat and then turn off after 30 seconds. Any suggestions?
I have the same 100A 20s14p on a ebike battery
It Was charging lastnight, i change a few settings in the app While it was charging
Its now 76v fully charged when i test it with the volt meter but the bike wont turn on and i have NO connection with the Bluetooth dongle to reset the settings
Daly bms are crap. JK or JBD much better