7:38, MTU is maximum transmissible unit...in your case its 65 bytes. Meaning that data greater than the MTU will be fragmented and sent in subsequent frames/units. For low latency applications, a lower MTU is desirable but can cause package losses.
Hello Arkash, @CETech I am working on a project called smart keychain. The idea of the project is that whenever you forget your keychain it has to send you a notification to your mobile phone stating . For mobile notifications I have planned to develop an Android app. For the keychain part I planned to use the BLE module powered by the coin cell battery "CR2354". My question is , whether is it possible to use the Reyax RYB080I module without any microcontroller or FTDI chip? Does the Reyax RYB080I module work standalone?
Před 3 lety+1
chinese websites, indian tutors, american products! thanks bud :)
Hi , I am using Raspberry Pi 4 , IMU sensor and REYAX RYB080I . just to know what is the range (in mtrs ) for this bluetooth ? is it reliable to send DATA that is send by IMU sensor only to raspberry Pi 4 (as it has inbuilt bluetooth to receive data )? I had written a mail to you too
Hey I really like the video but can not seem to be able to find this microcontroller or the breakout board on e-bay so I have a question; is there any other place we can get this or is there any other other really tiny microcontrollers that we can use for wearable products. Thanks in advance I just sucscribed after seing this video.
Hi. My project is a trackable key fob. Would it be done just by using this, sound buzzer and a battery? And what battery would you recommend for a small wearable device?
Dear CETech, I can not thank enough how helpful these videos are, thank you very much for these and keep up the good work! Cheers man.
Hey, I am so glad that the content is helpful. Do support the channel in your own way!
Yes we are intrested to watch further more projects with this module... Its totally amazing😍
Noted!
7:38, MTU is maximum transmissible unit...in your case its 65 bytes. Meaning that data greater than the MTU will be fragmented and sent in subsequent frames/units.
For low latency applications, a lower MTU is desirable but can cause package losses.
Great work here! I'd like how you went over the datasheet and explained everything. New Sub, liked.
Your videos are amazing, very well organized, you give us all the informations we need.
Thanks for your work!
Share the video and consider subscribing to my channel for more videos like this!
Hello Arkash,
@CETech I am working on a project called smart keychain. The idea of the project is that whenever you forget your keychain it has to send you a notification to your mobile phone stating .
For mobile notifications I have planned to develop an Android app.
For the keychain part I planned to use the BLE module powered by the coin cell battery "CR2354".
My question is , whether is it possible to use the Reyax RYB080I module without any microcontroller or FTDI chip?
Does the Reyax RYB080I module work standalone?
chinese websites, indian tutors, american products! thanks bud :)
Bahut sundar hand h aapke bro....🥰
This is really nice!!! But, does RYB080l works only with the proprietary app? Can I exchange data using the browser?
Nice explanation . You got a new subscriber :)
THIS IS WHAT I NEED, THANKS
Nicely explained. Subscribed and bell clicked.
I hope you are enjoying the Derry air.
Hi , I am using Raspberry Pi 4 , IMU sensor and REYAX RYB080I . just to know what is the range (in mtrs ) for this bluetooth ? is it reliable to send DATA that is send by IMU sensor only to raspberry Pi 4 (as it has inbuilt bluetooth to receive data )? I had written a mail to you too
hard to find these modules anywhere, at least outside of US
Are bhai RyB080 module ki pdf Q dawonload nahi ho rahi hai bhai please help 🙏👍🏻
Hello, Is it possible to rename the bluetooth nsme that shows up in bluetooth on the mobile devices?
Do you know of any programmable bluetooth clicker or very small controller that I can program to a custom application.
Can we activate master & slave mode at same time with the help of this module
what is the thinnest bluetooth module which is available
Yes please make a connection without ESP8266
Hey I really like the video but can not seem to be able to find this microcontroller or the breakout board on e-bay so I have a question; is there any other place we can get this or is there any other other really tiny microcontrollers that we can use for wearable products. Thanks in advance I just sucscribed after seing this video.
Seeed Studio XIAO ESP32S3 closest I have found
It seems these modules are not available anymore
Seeed Studio XIAO ESP32S3 seems closest I can find
@@jonscott8586 I recently found FSC-BT691, HJ-580LA, CH9141, JDY-06 modules which are very small
I need your help!!!
I need to make a wireless earphone can I use this module
I am working on a project and was wondering if you can help me with it privately? Please let me know.
You can drop us an email, email Id in the video description
Hi. My project is a trackable key fob. Would it be done just by using this, sound buzzer and a battery? And what battery would you recommend for a small wearable device?
CR2032
Is the code the same as in module hc-05?
Nope
Great video, do you know of any smaller BLE?
This is the smallest that I have used
Can i use it for my bt earphone ......
Where can we buy them from in India?
And please help me to use it as a bluetooth reciver for a smart watch.
Hi is there a good alternative to this product? I can't find it for sale anywhere
The generic arduino bluetooth module!
can it be a hid (midi, keyboard?)thx
@cetech GitHub is throwing a 404... Any place else where I can find it?
multi slaves is possible?
Can i connect the Ryb080 to earphone and play music??
Nope
You should make this so it's like a wearable tile.
Tile
how to make bluetooth headphone with this
Thats a bit complicated but you can refer to their user guides to come up with that project
@@CETech4u Where can we find the user guides, because i'm also wanted to make headphones with it :)
just use a esp32