Setting Up Your SCULPFUN S30 With LightBurn
Vložit
- čas přidán 24. 07. 2024
- In this video we will take you step-by-step through the process of getting your SCULPFUN S30 laser up and running with LightBurn on both Mac and Windows. We will also go through the process of configuring the air assist pump and limit switches. By the end of this video you will have your S30 configured correctly in LightBurn and ready to engrave!
Download the CH340 Driver here:
lbrn.info/N4XC2
LightBurn Beginner Project:
lbrn.info/HhyPy
LightBurn Tutorial Playlist:
lbrn.info/s1FJi
Download LightBurn today as a trial here:
lbrn.info/kmFVM
If you need to renew your license click here:
lbrn.info/LP5Im
If you need help, please join our support forum at forum.lightburnsoftware.com or email us at support@lightburnsoftware.com
Time Stamps:
0:00 - Overview
1:06 - Windows Install
5:36 - Mac OS Install
9:15 - Air Assist & Limit Switch Set Up
The sculpfun looks so great!
Hello thanks for sharing this, hope u guys can keep making videos about the SCULPFUN S30. Its so easy to understand you and follow the steps :)
We are wanting to create more project based learning videos. The good news is with these they are fairly universal and will just require adjusting speed\power in most cases.
Wow this is the best help I can find thank you for this cause I was going bald with frustration
Thank-You ! Thank-You ! Thank-You !
This is really useful tanks
Sir, thank you so much, that was very helpful. Have a 'like' from me.
Hey when I press home on my s30 pro it tries to keep going making this godawful noise.. any suggestions?
thanks
Hello, thank you very much for the video ! I have an issue on the 1.3 version of lightroom. About the air assit, the menu doesn't seems to exist anymore on this version. How can I fix the homecycling issue ?
Are you saying that you do not see the option to toggle air on or off in the cuts/layer window? The questions following it seems like you are asking about homing so I am not sure if there are two separate issues or if they are somehow related. Please send screenshots/video of the issue you are having to support@lightburnsoftware.com.
I have a question i have a xtool d1 and i use light burn i been wondering whats the best speed and power for just plain wood
This varies slightly for each machine but xTool should have a table that outline good starting settings for most common materials. In LightBurn you can go to "Laser Tools", and "Material Test" to run a speed/power grid. This will help you find the best settings for your machine and material.
I have set up my S30 according to this video. However, the laser bed on the software does not match the laser. It seems to be different everytime and I can't figure it out. It homes to the front left corner. If i put my project in the front left, the laser frames to the rear and tries to go bwyond the bed. Please help!
It sounds like the origin was set incorrectly. If the origin is not set to match the laser mirrored output is common as well as the location being incorrect. I would look to make sure you have the origin set to the front left corner. If for some reason it is and is still framing in the opposite corner try switching the origin to one of the other three options to see if that resolves it.
great machine can we use this head to the Sculpfun s9 frame?
The biggest concern I would have is power draw depending on the diode module on your S9. I would contact SCULPFUN directly to see if there is an upgrade path available.
for some reason "air" is not popping up in my cuts and layer window. How do i make that happen?
It could be off to the side if the window is small, or it’s possible it’s not supported by whatever type of laser you have. Do you have a Sculpfun or some other kind of laser?
Hello, i followed all your instruction carrefully, but when i click home ,to homing the laser,it doesn't touch the x axis limit switch and do an horrible sound... please can you explain me why?
Is it homing in the wrong direction or hitting the switch but not stopping? If it is homing in the wrong direction you will need to adjust the direction with $23 in the console. You can find specifics on that here: github.com/gnea/grbl/blob/master/doc/markdown/settings.md. If it is homing in the correct direction but not stopping when it hits the switch I would double check wiring.
@@lightburnsoftware7189 Same here, it doesnt stop and wires are ok
Hello, i have s30 pro max, but using the settings that where on the original video, it doesnt' even cut 3mm wood that was in the package. The laser is brand new.
If the S30 Pro Max is also 10W I would confirm that your focal distance is set correctly. Check the section under power output in this article: docs.lightburnsoftware.com/Troubleshooting-Output.html#output-is-mirrored-or-backwards
If that doesnt do it I would contact Sculpfun.
@@lightburnsoftware7189 I can confirm it's 20w.
I need the information about setting for cutting!!!! is there any video where you explain this? Sculpfun S9 or any other??
Are you just looking for speed and power settings? The manufacturer may have this but it is always recommended to run a test grid for each new material to find the settings that work best for your machine. This video covers the tool: czcams.com/video/RPNzjK4kvEQ/video.html
@@lightburnsoftware7189 thank you 🙏
Having the specific issue with my S30 pro max not firing the laser when I click the fire button. It will not fire during the framing process either. I have enabled both functions in the laser settings and have not been able to figure it out. The laser cuts and engraves perfectly when I start the task and works great otherwise. I never had this issue with my other s30 pro. Any help would be appreciated.
Hi mate!, u know…I’m having some minor difficulties. I installed the driver, restarted my computer and changed the usb ports but, it still doesn’t recognize the laser. I’ve been searching forums but no one seems to know. Do u have any idea how could I fix it?
Hello everyone. Can you please help me, I can't install CH340 Drivers for Windows. What should I do?
What issue are you having with installing the driver? Send our support team an email with a screenshot of what you are seeing or any additional info on the error - support@lightburnsoftware.com
I tried downloading this CH340 windows driver but could not due to a virus was detected . So now i am at a standstill and do not know what o do.
If you used this link then it would be a false flag and you may need to allow it past your virus detection: sparks.gogo.co.nz/ch340.html
Alternatively you could try a different source. The CH340 driver is quite a common one.
I've bought the s30 but lightburn is stuck at 25% when searching the device, any help?
Unplug everything but your laser. If that doesn't work, just use 'Create Manually", choose 'GRBL' as the device type, enter the size of the machine in mm, and choose front-left as the origin corner.
I installed the driver and set up the laser. It says "ready" but when I go to machine settings it says "communication with controller failed." What am I doing wrong?
In the Laser window next to the device button is a drop down that lets you select the COM port your laser is connected to. Although it is saying ready, I am wondering if the wrong port is selected. If there are other options in that drop down try them and see if it resolves the issue. If it persists contact our support team - support@lightburnsoftware.com
That was it! Thank you!
The driver failed on my windows PC so I had to reload. Now I don’t have the option for M7 or M8
The driver failed when you initially installed it? M7 and M8 should still be showing in the device window. Send an email to our support team along with a screen shot - support@lightburnsoftware.com
I have Sculpfun s30 pro. My real work area is 378mm x 372mm. it is something normal?
The S30 Pro may have a slightly smaller build volume do to the larger diode. In a lot of instances the diodes will be physically larger which could eat up a bit of your usable work area.
@@lightburnsoftware7189 so I literally bought a machine with a cutting capacity of 410mm x 400mm and it doesn't even have 370mm x 375mm. Good marketing..
Having the specific issue with my S30 pro max not firing the laser when I click the fire button. It will not fire during the framing process either. I have enabled both functions in the laser settings and have not been able to figure it out. The laser cuts and engraves perfectly when I start the task and works great otherwise. I never had this issue with my other s30 pro. Any help would be appreciated.
What do you have the output set to? There is a percentage you will need to set in the move window that translates to the fire button there and when framing. On some machines if it is too low it will not output anything or be very dim.
For now description is misleading. Working area is 400 mm x410 mm. But laser can reach only 360 mm x 340 mm. And don't forget very loud fan. It's turned on even if you don't do anything with CNC.
What is this $30?
Is this in reference to the grbl setting? If so we have some info on it here docs.lightburnsoftware.com/Troubleshooting-Output.html#power-output-is-not-the-same-as-other-software-grbl
If not, and you need help please contact our support team support@lightburnsoftware.com