PCMflash Update April 2024 - ZF Gen3 8HP & 9HP TCMs, ES11, BMW, JLR, Porsche & more! Module 96
Vložit
- čas přidán 30. 03. 2024
- New! PCMflash Module 96, the ZF TCU Bootloader for Gen3 & other ES11 TCMs.
BMW Gen3 8HP
JLR Gen3 8HP
JLR & Chrysler Jeep 9HP48, 9HP50
Porsche PDK2
Mercedes & others.
www.oldjaguar.com - Auta a dopravní prostředky
Hello, if you have the module how much you sell me the software to be able to do all in zf transmission
Also get an E094 code No message (display transmission data) from the electronic transmission control, receiver gear selector switch, transmitter electronic transmission control / HIM
Have you ever seen this before ?
Great Video!! Maybe not directly related to your video subjects. I have the ZF26hp in my X5 E70 35d and getting these weird fault codes :
4BE8 DDE: Message (transmission data 2, 0x1A2)
4DF3 DDE: Message (torque transmission, 0xB5)
4BE3 DDE: Message (transmission data, 0xBA)
Do you think this might be a TCM fault or maybe connections?
My friend, I made the necessary connections, but the reading did not work. I tried with several controls and the same problem
Hi, could you please check with your bmw buddy if the new module supports the 96, 8hp module installed on 2020-2024 bmw?
Can this software be used with any J2534 Pass Thru device? Or do I have to buy a Scanmatik? I have a 2019 Jaguar F-Pace with a Gen 3 8HP45 that needs to be cloned. I own many J2534 devices including Cardaq, Autel and Launch. I'm wondering if I can use them along with my Godiag breakout box and power supply to get the job done.
Module 96 should work with any good J2534 but you will need to make your own connections to the TCM socket & external power.
@@OldJaguarAU Thank you so much for your quick reply!
Hello i have a bad 6hp26 tcm and a new one that needs cloning first from the old one, can i send you both? And if can, how much?
Can this be used on ZF8HP70 swaps to keep OEM TCU in use, provided the proper CAN signals?
This is a tool to read/write the original TCM contents, what you do with that capability for tuning, swaps, etc is another matter.
Can you help me with the wiring diagrams please? Or can you sell it to me please
If you buy module 96, do still need to buy 82 to do the older boxes or will this do them?
What is required to do all JLR 6HP26/28, 8HP45/70 etc from 2002 onwards?
can it read ISN data (eeprom) from the new G modell gen3 gearboxes?
You can read & write the EEPROM, but modification of ISN or other data is a separate thing.
Will the module do 8hps in VAG stuff like amaroks and Audi's etc?
I believe these were already supported by Module 82.
Does this also support the FCA ZF8HP70 and 75, ZF8HP90 and 95 ?
In the Dodge/Jeep/Ram Vehicles?
The FCA 8HP were already supported in Module 82 of PCMflash for a couple of years now.
@@OldJaguarAU yes I've seen, but doesn't this require opening the TCU ?
A direct connection through the OEM plug like in the video would be preferred
@@jeroenlubking7021 Module 82 is working with a connection to the socket like you see here, no need to remove the TCM from the transmission or open the TCM up. When I get a chance I’ll make a video on Module 82 to explain in detail.
@@OldJaguarAU thank you for the clarification. An in-depth video would be very helpful!
Hello can it be used on range rover vouge 2017
8hp45x jlr gen 3 can it make it virgin again
Can immo off be done to the gen3?
It should be possible but PCMflash is only a read/write tool, modification of the file content for immo off is up to you.