Polaris RZR Turbo R | Engine Oil, Gearcase Oil, & Maintenance Tips
Vložit
- čas přidán 22. 08. 2024
- Welcome back! We wanted to provide a quick overview on how to change your engine oil along with your rear grearcase oil on a 2022 Polaris Turbo R. This is a task any Joe Schmo can tackle in their garage and we will show you how to do just that! This tutorial will help guide you with Pro XP, Turbo R, and XP1000 models.
Please like and subscribe to our channel if you found this helpful!
Loose Lugs Off-road Store - looselugsoffroad.com
Tools needed:
8MM hex head socket or allen key - Gearcase drain/fill plug
6MM hex head socket or allen key - Oil plug
T40 Torx - Bed removal
Socket wrench
Socket extension
Funnel
Part Numbers:
RZR Oil Change Kit - 2890058 (3qts & Oil Filter)
Gearcase Oil - 2878068 (2qts)
OEM Polaris Drive Belt - 3211202
Awesome tips! Need to just start doing this stuff myself you made that look easy
Much appreciated, Elder!
Good video...bummed to see your store is down?
In any case, hope you don't mind if I add a couple "best practices" to what you've shown:
Engine oil change:
1)Run the engine a few minutes to warm the oil prior to change
2)Make sure the engine oil filter o-ring comes off with the old filter as to not double stack the o-ring; as well as clean the mating surface before installing the new filter.
Gearcase drain (front or rear):Make sure to crack loose (don't remove) the fill plug before draining. This ensures you can get oil back in the gearcase.
Belt: If you are going to pull the belt, may as well blow out the dust from the clutches and wipe down the sheaves. I like to use rubbing alcohol for the cleaning.
Great input! Blowing out the clutches is a big one, especially out here in Arizona where it’s insanely dusty.
We’re currently working on getting some new designs and a new supplier so the store is down until we get that all squared away! 🤘🏻