How to - Install Tony Kart Rear Bar - The Easy Way
Vložit
- čas přidán 6. 09. 2017
- In this video we show you the easy way to install the rear crash bar on your Tony Kart.
For more information or to purchase any parts, head to our website:
www.powerrepublic.com.au
Or check us out on social media at:
/ powerrepublic
/ powerrepublic - Auta a dopravní prostředky
Great video keep them coming I got a quick question Where I live we get winters below freezing with tons of snow. How would you winterize a rotax 125 For winter storage I know I gotta drain radiator , but how to get water out of the motor? Crank it over? Thanks. Billy
Eastendhunter9 I would drain the water out by removing the radiator. Then tip the engine back and forward to move the water around the engine to fall out of the bottom radiator hose outlet of the engine. That way you won't have any water left in the water jacket of the engine.👊🏿
Gday, we currently use a plastic bumper on our Alonso kart, just wondered if you could let me if there is any difference using a plastic bumper to a metal one?
Is a metal one better to use on faster tracks?
If so what metal bar would you recommend?
appreciate any answers .
Thank you Tony
Hi Diane, the metal ones were awesome cause you could loosen and tighten them and the effect was more than the plastic equivalent. if you can use the metal one in your rules, I would use it cause it has less weight and also a tiny bit less aero drag
Do plastic kits fit on any type of tony kart no matter the year the frame was made
no the plastics for the bars, so M6 plastics fit M6 pod bars. Nose cone and Nassau panel are the same
@@PowerRepublic even for a 90's tony kart?
How to know if the rear is bend ?
inoted ng it’s a bit harder as you would need a flat bed/table to measure and see if it was sitting up. Normally the brake side rear chassis rails bend up in a big accident.
Don't you loosen the number a little
Hi Joe, some guys do. personal preference really