OEM+ Srt-4 Engine Rebuild Part 2

Part two of the engine rebuild and we are doing the piston install. Ill try to be doing as much detail explanation on the video to help people with the install.
www.modernperformance.com/pro... rings
www.modernperformance.com/pro... rods bolts
www.modernperformance.com/pro... bearings
www.modernperformance.com/pro... bearings

[@jasondockray5612]

Thank god i found this im building my first motor and ive been trying to figure this out on my own but these videos are gonna help me alot

[@stagedracing8150]

That what I was going for man. Thanks for the input Jason.

[@Nasty2SS]

Underrated channel. Good info here. Building my first SRT4 and these videos are a God send. Thanks brother 👊🏻

[@stagedracing8150]

I appreciate it brother!

[@stagedracing8150]

I added links to all the parts used on the video.

[@peanutbutter732]

love these bro

[@stagedracing8150]

Thanks buddy

[@christopherbassit2757]

So sick

[@stagedracing8150]

Thanks dude

[@bruteento255]

thank you bro i appreciate it

[@bruteento255]

also if the block is bored out .020 will stock pistons still work?

[@stagedracing8150]

@@bruteento255 you would have to go oversized pistons for them to work

[@CodeB]

i just bought a used engine to take to the machine shop and then try to build a new motor for my srt4 and now i kinda think i might be in over my head lol

[@stagedracing8150]

We have fate in you buddy

[@PrahTV]

Question when you take it to the machine shop what all do they do or you tell them? I’m going to be doing mine soon and I’m another 1st timer

[@stagedracing8150]

I told them to
1.hot tank the engine
2. Check the bore and make sure they are in spec.
3.hone the bores.
4. I gave the then main and cap bearing to check the clearances.
5. Magna flux the block.
6. Resurface the head.
7. do a valve job on the head.
And that’s about it really.

[@PrahTV]

@@stagedracing8150 can I ask how much it costed you for all the block work minus the head stuff?

[@stagedracing8150]

@@PrahTV around $800.

[@ezequielcortez2233]

What gap did you run on the oil rings?

[@stagedracing8150]

I honestly don’t remember since it’s been awhile. On the first engine video I added the link to the FSM and i know I went in the middle of the tolerances.

[@ezequielcortez2233]

Mine came .025 out of the box

[@stagedracing8150]

@@ezequielcortez2233 I kinda remember now think it was 25 or 27.
19 to 29 what is the threshold between the gap I think.

[@ezequielcortez2233]

@@stagedracing8150 ok perfect

[@TrevSRT4]

What were you ring gaps on all 4 if you don't mind me asking. Finished up on my rebuild a month ago just wanted to compare my rebuild numbers to yours if you don't mind? Thank you in advance

[@stagedracing8150]

I honestley dont remember... I want to say around 23 and 24. kinda right in the middle.