Props are still folded when you start the motors running. Then the front-right propeller is still unfolding when you tried to throttle up thats why it crashes.
No… it’s the problem with propeller fixing… the front propellers has to be 1side A “type and 2nd side B “type Back side 1side B “type and 2nd side A “type…
The vibration in the start could be a local propeller set used and for 4 bldc motors two clockwise and and two anticlockwise must be used the back side of drone lift but not front you must have swapped the clockwise and anticlockwie Propollers so make sure it is in correct clockwise and anti-clockwise motors
Tip- before flying, open out your props, to prevent that initial vibration. Also check you have the correct prop on the correct motors! The rear props look correct but the front ones are on the wrong way round....😮 Note 2 props spin clockwise, 2 spin anti clockwise and the props have to be pitched accordingly!
You put propellers at wrong position. Thus, you need to.open wide all propellers' blades to straight position to avoid hinge shaft crack on its main body due to hard vibration from the motors on the initial/startup. If blades arw all wide open, there will be less vibration from the motor onto the main body
How do you know that the propellers are attached wrong you can't even tell that is wrong I can't even notice what is wrong it's so hard and difficult stop saying this confusing question 🤔 this is the hardest question I ever heard on any comment stop saying this confusing question ever again
Did you at least read how to put on well the propellers?? There are 1000 stickers for making sure anyone does it incorrectly.Also you need to do an exam and pay a secure for your drone otherwise youre flying ilegal.
All the propellers are marked white. Please make sure the propellers are installed correct. Black to black white to white. You can see the markings on the propeller at the end
Always check ur props if they are in the correct order and position, these basic checks are just like in real life where a pilot goes through pre flight checks before taking off That’s why u should never purchase a expensive drone if u inexperienced I mean think about those traning ppl take to fly such dji’s those are not just there for show purposes right U should have bought a toy grade drone first which costs fraction of the cost of what this drone costs ( the general functions are same as the dji so U will get a little idea ) and if u crash the cheaper one it won’t even break because they are light weight but these ones are heavy and if they fall that’s pretty much game over Also try to put some prop guards it will save ur props if it falls to some extent Also read the damn manual if it’s ur first time lol Feels sad to watch this even a small drop like this could take of some pieces off ur propellers and it will severely harm ur drones stability in mid air
@@jedithusnbixby2108 how do you know that's on the incorrect spot save comments same confusing question Don't say this again I'm sorry to say that you shouldn't use this comment ever again
Improper propeller installation, causing the drone to flip over. Also, failing to unfold the propellers, before engaging the motors, will cause stress fracturing, under the Air 2's arms. Research, before you fly, helps GREATLY!
No… it’s the problem with propeller fixing… the front propellers has to be 1side A “type and 2nd side B “type Back side 1side B “type and 2nd side A “type…
Todas las helices, son del mismo paso, del mismo lado: se vé, si paras el video cuando están paradas, pues todas tienen la franja de color hacia el mismo lado diagonal😅
I made a worse crash I was flying and boom I hit metal I was going down quickly and pulled up shortly after I landed and the wings aren’t going fast now
First recording on the drone. Camera lense skidding across the ground and props not put on correctly despite the stickers right there that explain. At least non of his bystanders got hit because of his stupidity. Hopefully he got them on PROPerly and got to fly and enjoy one of the best drones ever made by DJI.
Props on incorrect
Yes
plus you should always open up your props
Yes
YES
YESSSS
Did you guys even put on the propellers correctly
Make sense
The answer might surprise you 😂
Я так лопасти сломал
Make sense 😄
Fr
Cameraman had one job
LoL
Vo bc ne ulta fan lga rakha h aur cameraman to slow mo capture kr rha h 🤣🤣
😂😂😂😅
Straight disliked 😂😂😂
Cameraman has tiktok I.Q.
Props are still folded when you start the motors running. Then the front-right propeller is still unfolding when you tried to throttle up thats why it crashes.
Yas thanks 🤗🤗
No… it’s the problem with propeller fixing… the front propellers has to be 1side A “type and 2nd side B “type
Back side 1side B “type and 2nd side A “type…
@@TurkarJi what thanks? You just wasted 65,000 rupee. Isliye kehta hun ki gawaar logon ke haatho nhi aana chahiye aise mehngi cheej.
@@TurkarJi no point saying thanks if the drone is broken now, 1.5 lakh gone down the drain🤡.
@@Dynamo69420 bhai repair naam kah bhi cheez hai aur paise uske wo jitna udaye ek mehanga hai aur full tut thori na gya hai ho jayega repair
This is why Tesla will never set up a factory in India.
No one could even buy one lmao, only the rich indians could
The vibration in the start could be a local propeller set used and for 4 bldc motors two clockwise and and two anticlockwise must be used the back side of drone lift but not front you must have swapped the clockwise and anticlockwie Propollers so make sure it is in correct clockwise and anti-clockwise motors
Yaa. I think he didn't fix the propellers in the right way.
@@rneichgamerz9931 yeah He didn't also follow on how to use it. He didn't unfold the propeller before fly
Dji clearly says in the manual that you must *unfold* all props before taking off😅
Common sense says in the manual to unfold them
The props are incorrect, I have my own mavic air 2 it doesn’t need to open props he will do it by itself
@@mishgan_11
Which mavic 2,mini or air?
@@asniperaimatyourhead air
@@mishgan_11 it's weird bcuz i have mavic 2 air too but i have to unfold the props every time before takeoff
Great skill and also great camera works.
🤣🤣🤣🤣 exactly top notch
All round perfection
😀😂😆
I see like four mistakes in the first 2 seconds of this video.
Bro has no idea what he is doing🔥
First open drone propellers 🤣🤣
🤣🤣🤣🤣
You can fly with the propellers still folded the right ones need to be on
@@dandimitrievski5926 as he just demonstrated. 👌
Kabhi uadaya h ?
@@pahadimusafir822 bro m drone operator for movie's... Cm i vl teach u... 🤣 free may
Maybe it was because the propellers were folded or maybe if you had fix the propellers in the past you’ve might have not put them on correctly
He must have put the props on the wrong way
Tip- before flying, open out your props, to prevent that initial vibration.
Also check you have the correct prop on the correct motors!
The rear props look correct but the front ones are on the wrong way round....😮
Note 2 props spin clockwise, 2 spin anti clockwise and the props have to be pitched accordingly!
You put propellers at wrong position. Thus, you need to.open wide all propellers' blades to straight position to avoid hinge shaft crack on its main body due to hard vibration from the motors on the initial/startup. If blades arw all wide open, there will be less vibration from the motor onto the main body
It’s not the original propellers & mismatched!!
When you take off with the propellers still closed it puts huge stress on the motor
What a knob you get a drone and don’t even know how to take of and emergency land 😂😂😂
Also u should learn the motor start and stop command :) just move both sticks to the inside corner and it should stop the motors
There are markings on the drone which propellers goes where you attached the propellers wrong
I guessed it too.. it happened with me! Followed the markings and then sorted!
How do you know that the propellers are attached wrong you can't even tell that is wrong I can't even notice what is wrong it's so hard and difficult stop saying this confusing question 🤔 this is the hardest question I ever heard on any comment stop saying this confusing question ever again
@@Mingzhe583vruh
Great camera work
😂😂
I think so
Who did they scam to get that??
Maybe the screws are rust and the props can't spin properly
Did you at least read how to put on well the propellers?? There are 1000 stickers for making sure anyone does it incorrectly.Also you need to do an exam and pay a secure for your drone otherwise youre flying ilegal.
someone didnt read the manual lol props ma friend props
Hold both sticks in the same way you start to emergency stop the rotors
I do not unfold my drones propellers no more. But I never lift off as soon as the motors start. I let them spin a while and then lift off.
bro forgot to watch a tutorial before SWITCHING YOUR PROPELLERS
Bro turned the propeller into VTOL💀
Their drones, not a plane.. ofc its vtol
All the propellers are marked white. Please make sure the propellers are installed correct. Black to black white to white. You can see the markings on the propeller at the end
You cannot see it right now dude why there so many comments say this stop this game of arguments
@@Mingzhe583because their right 😂
This is why you should buy cheap drones when learning to fly.
Always check ur props if they are in the correct order and position, these basic checks are just like in real life where a pilot goes through pre flight checks before taking off
That’s why u should never purchase a expensive drone if u inexperienced I mean think about those traning ppl take to fly such dji’s those are not just there for show purposes right
U should have bought a toy grade drone first which costs fraction of the cost of what this drone costs ( the general functions are same as the dji so U will get a little idea ) and if u crash the cheaper one it won’t even break because they are light weight but these ones are heavy and if they fall that’s pretty much game over
Also try to put some prop guards it will save ur props if it falls to some extent
Also read the damn manual if it’s ur first time lol
Feels sad to watch this even a small drop like this could take of some pieces off ur propellers and it will severely harm ur drones stability in mid air
Dude it's because you didn't follow on how to use the mavic 2. That's why it happens
Dji clearly has a disclaimer that no chapri is allowed in 100m radius, if Chapri comes near drone will behave abnormally
Buys a drone, does the exact OPPOSITE of what the manual says…. Wonders why it don’t work.
Ooof the drone pilot is way more interesting than the drone
Nem tirou os plásticos e já arrastou a câmera no chão 😔
The number one rule of flying a mavic is unfolding the props first before take off
No the propellers were on incorrectly. The props can be folded but it will unfold itself
@@jedithusnbixby2108 how do you know that's on the incorrect spot save comments same confusing question Don't say this again I'm sorry to say that you shouldn't use this comment ever again
You should try to your own drone, fly with folded props then see. His comment makes sense though@@Mingzhe583
Oops propellers are not installed to spin the correct direction. You’re lucky no one lost a toe.
Kitna ka ha ya
This happens because you didn't install the propeller in the right direction
the wings are wrongly installed
Improper propeller installation, causing the drone to flip over. Also, failing to unfold the propellers, before engaging the motors, will cause stress fracturing, under the Air 2's arms. Research, before you fly, helps GREATLY!
What do you put the props on the wrong motors
Yeah it happened to me also
Nice job guys, you didn’t take the tape off the propellers and it stuck.
Maybe doing mistake while plug n play the propellers.. Please check A & B propellers plugin must in right position ..
Sometimes
People are not smart and run through things
Trying to get them done as fast as they can which makes a mistake when that
Happens
Am guessing he installed the propellers wrong. Propellers with Grey rings need to go on the grey marked rotors and black to black.
Propeller installation should be changed..
You should get a landing pad to keep those propellers clean during the take off brother.
No the hand take off and the hand landing are much better . I don't need a landing pad which takes a lot of space.
@@stefan.w979 of course that's advice for people who use the ground to take off
No… it’s the problem with propeller fixing… the front propellers has to be 1side A “type and 2nd side B “type
Back side 1side B “type and 2nd side A “type…
Drone buyers must complete IQ test before buying🤗
😂
Les hélices à l'envers mon frère 😂😂😂😂
Some people needs to buy drone with already attached propellers i see.....
1 the props can be closed since centrifugal force will open them
2 he fucked up the props stetting
3 its not broken its just gonna stratch it
Wrong props, check the markings on the props.
Propellers are not placed as per CW ANS ACW
First open drone propellers😢
Propeller might be in wrong motors they have markings on them !!
Todas las helices, son del mismo paso, del mismo lado: se vé, si paras el video cuando están paradas, pues todas tienen la franja de color hacia el mismo lado diagonal😅
I made a worse crash I was flying and boom I hit metal I was going down quickly and pulled up shortly after I landed and the wings aren’t going fast now
No surprise by seeing sitting maneuvering
You put the propellers on improperly...😅
Kya kharcha aaya bhai , aur repair hokar bana ki ...
It baca me a FPV drone ngl
Next he should avoid to operate a drone using midd finger
First recording on the drone. Camera lense skidding across the ground and props not put on correctly despite the stickers right there that explain. At least non of his bystanders got hit because of his stupidity.
Hopefully he got them on PROPerly and got to fly and enjoy one of the best drones ever made by DJI.
Defenetly props installed incorrect
Dude thats the easiest drone to fly..and you cant even get it to hover..?
Сделайте калибровку
front propeller is too tight to open automatically
Como conseguiu encaixar as hélices o contrário? 😆
why didn't youopen the props before launching?
As an fpv pilot i feel like guys flying mavics and crashing are dumb like really dumb
Bhaiya propellers to open karlo sahi se 🤣🤣
Bro try to calibrate it
😂Bhai jab Cantrol hi nahi kar na ata to Liya kyu 🤣🤣🤣😂
Props are not installed properly
Bro use wing protector and if you don't have buy 👍
Props installed incorrectly
Cmon dont make fun of the pilot guys 😔
Mavic turtle mode be like:
Ох уж эти индусы, Жади воздушные винты не могут правильно одеть
When you buy aukaat se bhar vaali cheej and you are the 25th owner , 😂😂😂😂 aana kabhi tution lene haweli pe 😂😂😂
Props are placed in wrong way..plz first learn how to place props then try to fly it😂😂😂
How do you know
You can see how the drone reacts@@Mingzhe583
@@Mingzhe583your cringe af trying to support this guy, its obvious.
Yeah, the propellers we're put on wrong, it seems?
Beginner put into Normal mode and make your remote control is calibration setting is done properly.
You have to revice the fans which side is not flying
Puso mal las hélices
ทำไมคุณไม่เช็คใบพัดและการหมุน ให้ถูกต้องคุณบัง
Always shake your drone to free your prop before starting
Wtf?
Mere ko Lena kese lu bro
And this is why I unfold my drone’s props. It’s to prevent it from crashing and giving burden to the motor. (to unfold ofc)
Yeah that's what we do on DJI drones
The 2 rear propellers are the same.
The right top propellor wasn’t put properky
Props opposite dale hai bhai change it
They did something to the propellers
Las propelas amigo estan puestas en una posición que no es la de cada una y así te podes tirar el gymbal
You got to open the propellers
Mavic air 2??? That’s a mini 2 se