2015-2022 Challenger Axial LED Side Marker Lights Review & Install
Vložit
- čas přidán 28. 07. 2024
- A set of Axial Clear LED Side Marker Lights is a simple and effective way to upgrade the exterior styling of your 2015-2022 Dodge Challenger. These Side Marker Lights feature a razor sharp LED strip that replaces the unsightly hot spot of the factory lights. These Axial Side Marker Lights not only look great, but they are also much brighter than the weak factory incandescent lights for increased visibility day or night.
Quality Construction. Axial manufactures its Side Marker Lights with injected molded ABS plastic housings for durability, and use clear polycarbonate lenses for exotic good looks. These Side Marker employee high output, red (rear) and amber (front) SMD LED strip lighting for super bright illumination. Axial ensures that its Side Marker Light housings are weather sealed to prevent dirt and moisture from harming the state of the art electronics found inside.
Plug-and-Play Installation. Axial designed its LED Side Marker Lights to be a direct plug and play upgrade for your Challenger's original factory lights. There is absolutely no cutting, splicing or resistors required. Just pop out the old factory side markers and disconnect the wiring harness. Plug the harness into the back of your new LED Side Markers and snap them in place of the old ones. It's that simple!
Application. These Axial Clear LED Front and Rear Side Marker Lights are designed to fit all 2015-2022 Dodge Challenger models. Includes front and rear side markers.
muscle.am/3BIvRyU
0:00 Review
1:55 Install
Item CH3215
----------------------------------------------------------------
Follow AmericanMuscle for all the latest Challenger and Charger Content:
Subscribe for Daily Mopar Videos: muscle.am/2TXrfwf
Instagram: / americanmusclechallenger
FaceBook: / americanmusclechallenger
AmericanMuscle.com has the best aftermarket parts for your Dodge Challenger or Charger: muscle.am/2ztDN5R - Auta a dopravní prostředky
Shop these Axial LED Side Marker Lights! : muscle.am/3BIvRyU
When I installed these last year I was able to reach the fronts from under the hood, but I did have to lift up the air cleaner box (only one screw). For the rears I was able to reach them from below the car without opening the wheel wells and without having to jack up the car.
One thing to be aware of is that the original factory side marker lamps are also reflectors as required by DOT/Federal standards. These Axial replacements are not reflectors.
You dont have to take clips out in the back, You can do it for underneath the car!!😀
I agree, no need to remove clips
Ordered mine (for charger) yesterday, and they were on sale for $49. Not a bad deal. Looking forward to install/review.
Thanks for watching! -Zach
It would be cool to tint those since they emit light from all of the surface
Just reach under the car and push them out. You can also use a trim removal tool to just pry them out. No need to remove rivets.
You dont need to go through the wheel well on the back, just stick your head under the car and you'll see it.
Also the stock 15+ marker is led not incandescent
It sounds like the push clips are reusable? Should I have spares handy in case I break any when removing?
If you are talking about the front side markers the can be reached from under the hood without fooling with the wheel wells.
@@frederickgrayson5177 no, the other clips 02:18
@@leban86 There is no need to remove those clips and pry the wheel well open. You can reach the back side of the lights from under the hood.
@@frederickgrayson5177Not on the front driver side. You will have to either remove the air filter or remove the rivets as shown in the video. There is no other option. Prying with a pry tool risk a 80% chance of snapping the clip.
Can you get them smoked?
czcams.com/video/PJ15c3uTeCw/video.html they also have some for the rear bumper
Yes
Does it have DOT seal on side marker