BEST pocket screwdriver with 10 BIT STORAGE for EDC - CountyComm Titanium Bit Driver
Vložit
- čas přidán 1. 06. 2024
- This combines my favorite double sided Steinwhale bits in a sleek CountyComm Titanium Pen Driver pen driver that is perfect to carry everyday in your pocket or organizer. I'll show you ho wit compares to my pocket rachet and walk you through what I had to do to make this work.
Check out @maxlvledc video on this tool: • Budget Titanium EDC Sc...
CountyComm Maratac 1/4" Pen Driver Titanium - Gen 2
countycomm.com/products/1-4-p...
Steinwhale mini double sided bit set with driver
amzn.to/3VkqFdF
6mm Metric Drill Bit, 2 pack
amzn.to/3X3sRb0
Tap Magic Industrial Pro Cutting Fluid, 4 oz
amzn.to/3V0TJpi
7 Sizes Tiny Rare Earth Magnets, 259Pcs
amzn.to/4e2wOmk
6x2mm 320Pcs Magnets
amzn.to/3V4Bj6X
711L Mini Ratchet Wrench
amzn.to/4aESBxy
LOCHBY Tool Roll
amzn.to/3KsPZrQ
Watch my in-depth video on this rachet and bit kit here:
• SUPER ultralight tools... - Věda a technologie
WARNING: Apparently, machining titanium can cause fumes that are hazardous and the shavings can be flammable. I don't recommend anyone do what I did without safety precautions like proper ventilation, respirator, and fire extinguisher nearby.
You just put some over paid engineer to shame. Gen 2 should be on clearance awaiting shipment of Gen 3 with your improvements. Well done sir.
It would be awesome if they tweaked the design, the bit holder is too shallow imo. Imagine if they shipped it with these bits!
Outstanding idea. I hope CC takes notice and gets on it. Thanks.
High praise coming from you thanks! It would be awesome if CC updated this, there's plenty of material to make more room (and lighten it up).
I made SAK mod
Cybertool screwdriver layer with added bit. Knife layer from compact with awl. I've added magnet to the screwdriver, so it can hold any 4mm bit. Removed scales
Now it can fit in my wallet
Nice!
Would be cool to see that. Been looking to do another custom Cybertool
@@todd.parker czcams.com/video/3Hed5-RbCN0/video.htmlsi=0NL4gbOugMYHcLTn
Loved the bit set you shared, pairing it with the Topeak Ratchet Stick, you can get 5 double sided bits in the handle, another bit in the driver, it has the ratchet built in, and you can Dremel out one of the dividers and add even another double sided bit if you wanted. Those bits work in a lot of scenarios.
Great tip! I hadn't seen that racist stick before.
@@todd.parkerYou definitely don't want the racist stick 👀😆
whoops, damn you autocorrect!😅
@@todd.parker 😂
Rather than an either or question, I would carry the mini ratchet plus the pen. Adds two more double bits and a lot more extra functionality.
I am always looking for ideas how to store bits efficiently and functionally. I even tried empty old plastic pens. But those tend to be longer than 12cms and therefore too long for my pouch.
I currently prefer to us "short" / stubby single 1/4 inch bits. Those are 18mm long rather than the normal 25. Two short ones are probably a little longer than the short double sided bits, but I can use "shallower" bit drivers ike the 5mm hex to 1/4 inch bit converter by PB Swiss Tools.
Nice! Good job on the mod!
Fascinating and I admire your dedication to these projects. Personally, if I need a pocket screwdriver it’s a PB Swiss 6464. Not the same form as a pen, of course.
Bro, I was coming in here to say this lol.
The 6464 is a beast for its size.
I'm pretty sure it's shorter than the pen that he shows in this but obviously it's much thicker.
I have trying to find a way to put a pocket clip on the 6464 but no luck because of the way the grooves. They are just a bit to small to fit. I would love to find a clip that you could fit between the bit storage and cap to keep it in place.
Thanks, I’ll check it out
Nice modification. Bit screwdrivers are awesome, the only negative is when you encounter a recessed screw. I wish that the longer double sided bits were easier to find. That said, those super short ones are awesome, especially with the hi-five style bit ratchets.
Edit: "aweome" to "awesome"
Well done sir!
I hope that tool mfr’s watch your channel and take notes.
I hope so too!
Super - if somebody uses it permanently. To me your first kit (with Cobra Knippex) is still the best because more versatile. I use it with simple Leatherman extender (with no ratchet). The combination Knippexes and Leatherman extender can work as ratchet replacement in some situations. Thank You for inspirations in DIY. Best greetings :)
Glad you liked these ideas and found a setup that works for you
The Hoto 4mm bit pen holder/driver is 59 g and holds 12 double sided bits. There's a couple in common with Steinwhale. I am sure you could modify the center stack of the Hoto to hold the Steinwhale bits. You'd also need a 4mm to 1/4" square adapter. Or you could just carry the Steinwhale bit kit, extender, ratchet etc. in a small 5g dyneema bag like Ben Vallack mentioned. I am modifying a Victorinox Companion to add the Cybertool layer. It will be about the size and weight of a Ranger when finished.
Thanks for the rec. That SAK mod sounds amazing. I have a modded Cybertool and love it.
Very cool work! I don't understand why EDC-centric manufacturers keep using single-sided bits. The whole point of us whackos paying top dollar and obsessing over minutae to stuff our pockets with crap is to maximize utility and minimize space. Only double-sided bits fit both criteria yet they're incredibly rare and highly incompatible. It's weird.
100% agree, double sided bits are so much better for EDC
One design quirk I'm not crazy about here. You mention that it's not the greatest torque for some situations. Well they tapered off another radius of the driver pen right where you'd put your fingers to torque screws, seemingly enough to cut the torque you can apply without slipping in half. Why?! Just make the whole thing the same radius and you'd probably have a bit driver that's plenty strong for 90% of situations you'd use these size bits.
Yup I have that same issue when I get deep enough with the epoxy 😂
Welcome back Sir🙏🫡
Thanks! Glad you liked this oddball video
have you contacted the MFR to see if they would modify their model?
I haven’t but will look into it
What do you know about customizing a bit set... more specifically, a double sided t20/flathead would be the ideal pairing for my specific need. Thanks for sharing
I don’t think that would be something an average person could do
How does it compare to the Kershaw TX Tool which also hold 4 bits but weights 1oz. Also just noticed one called HOTO that holds 24bits and weighs
2oz
Those hold 4mm precision bits while this one holds standard 1/4 bits so it’s better for larger bits
Nice video, God bless.
Have you looked at the CRKT pocket driver stash tool? It holds 4 bits, aluminum and 1.4 ounces.
Ha, yes. In fact I bought one for this video but returned it. Didn’t hold the double sided bits and wasn’t a fan of the o ring retention
@todd.parker makes sense. What about the Big idea in-line max screwdrivers? They are over 100 dollars but hold multiple full size or leatherman bits depending on which one you purchase. They also can be used in a T handle position.
@@MethodOverRideyeah, those look good but I’m finding it hard to buy a $100 screwdriver 😂
Did you measure how deep you drilled or nah?
Nah but I just did it for you. The finished depth is 8mm + 2mm for the magnet so 10mm. Problem is the drill bit makes a concave hole so I'd bet if you measured the depth from the center, around 11mm is the sweet spot. What I did is measure the fit with a bit with magnet attached, drill some more and repeat. I wanted the whole beveled part of the bits to have contact with the collar because it was out too much, it would feel more wobbly.
Sold out unfortunately