Wind action (Wind load)_Wind pressure_Eurocode 1 | EN1991-1-4
Vložit
- čas přidán 6. 08. 2024
- This educational video technologically introduces how to determine the wind pressure applied on building vertical walls and roof based on Eurocode 1| EN 1991-1-4 standards as simply and as clearly as possible.
00:00 Intro
00:22 Basic notions: Wind flow
01:54 Wind pressure on surface: Model
03:45 Wind pressure on surface: General formula
04:59 Wind pressure on surface: Reference height
07:54 Wind pressure on surface: Peak velocity pressure
13:35 Wind pressure on surface: External pressure coefficients for vertical walls
18:29 Wind pressure on surface: External pressure coefficients for duopitch roofs
19:36 Wind pressure on surface: External pressure coefficients for other roof types
20:03 Wind pressure on surface: Internal pressure coefficients
23:04 End
Bravo, very comprehensive explanation
Good video. Well done!
Thanks a lot.
This is an elaborate explanation..please sir, Can you please make a video using a simple building as an example
Thank you very much for your interest sir. As soon as possible, I will elaborate an educational video as a tutorial using a simple building subjected to wind action. Deep respect sir.
EN 1991: 1-4:2005
Clause 5.2 ,equation 5.1
€
If the cross wind is zero what will happen?
Along the tangent it is 90 degrees
The external pressure is higher infact much higher than internal presure inside an aircraft ......
Great video! an example on a small portal frame building would be good!
Thank you very much for your interest. I'll post an educational video about your request as soon as possible.
Nice well
Kattupakkam