Dust Collection Cart - Shop Vac and Separator Storage
Vložit
- čas přidán 12. 09. 2024
- Get the plans HERE: bit.ly/2BLolnt
Big thank you to RIDGID for sponsoring this video! The 12 gallon has a 19% increase in overall power.
Find other design ideas here: bit.ly/2DTNWgl
Patreon: www.patreon.co...
Instagram: / wilker_dos
Website: www.wilkerdos....
Want to support me? Support the companies that support me. Triton Tools: bit.ly/2jaC0dD, ISOtunes: bit.ly/2rVobCD, Rockler: bit.ly/2oWrisB, Titebond: bit.ly/2zicV9i, and Infinity Tools: bit.ly/2C30XkQ
Check out my merch here: bit.ly/2VezUuO
Things I Used in This Project:
RIDGID Round Shop Vac: thd.co/2UwuaMG
RIDGID Square Shop Vac: thd.co/2Anpgsj
Dust Right Separator: bit.ly/2rKaE39
ISOtunes Bluetooth Hearing Protection: amzn.to/2pEjNtv
Universal Small Port Hose Kit: amzn.to/2tpl20T
Sketch Up: bit.ly/2uehhtC
Hercules Dolly: amzn.to/2Orc4wg
Ultimiate Workbench Plans: bit.ly/2LdT3Z0
Triton Track Saw: amzn.to/2qmTytb
Cord Reels: amzn.to/2wCnC4e
Right Angle Clamp It Jigs: amzn.to/2nJrfE0
Titebond Original Wood Glue: amzn.to/2hMkdZw
Woodpeckers 12" Square: amzn.to/2F43pvp
Rockler Surefoot Clamps: amzn.to/2B3Ns1w
Infinity Table Saw Blade: bit.ly/2UzrgWC
Infinity Insert Plate: bit.ly/2S2bp69
4" Belt Sander: amzn.to/2HCQgu7
3" Belt Sander: amzn.to/2AMO3VP
Palm Belt Sander: amzn.to/2py8tQO
Large ROS: amzn.to/2qnD8R1
Palm ROS: amzn.to/2Jgeven
Sand Paper Cutter: amzn.to/2AaBnsw
Thank you so much for your great videos April. I'm a 65 y/o retired grandma just getting started in woodworking and I find your videos so helpful.
I like the fact that you are able to use both left and right hands when drilling. I learned this after my brother switched his drumset around to be left-handed and if I wanted to play them, I would have to learn that way. I am naturally right-handed but using my left has really helped me when getting into the machines I work on at my job when my right hand wasn't convenient.
Awesome! Thanks for sharing and for watching.
Great idea! Thanks for sharing. Only thing I would change about your design is to have an opening in the back of the cart for the vacuum to release the air flow during operation. This would also stop the unit from overheating.
April: One of my peeves is that if I'm outside, the small casters catch and help tip the cart/vacuum. Use larger casters to roll over concrete expansion joints, debris, etc. if that happens to you.
I built a Frankenstein of this and Jay Bates design. I don't have as many sanders so one side is vacuum attachments and a spare hose for extra length on big projects. One thing I added since I'm lazy was a foot pedal by SSC Controls to quickly turn the vacuum on and off. The pedal has a textured top and solid metal construction. Kick it around or drop stuff on it and the worst that happens is you turn on the vacuum. The foot pedal has been an awesome addition to my workflow. No more fumbling around for a switch or getting lazy and making that last past without the vac turned on.
April, love your new vacuum/sanding cart! It definitely will make your life easier. One added feature you may consider, is adding a "iVac" Automatic Switch Box (Model SB-NA), they're not that expensive. I think it would be a perfect application for this project. That way when you turn on your sander the vacuum will automatically come on and it also stays on for about 6 seconds after you power off your sander. The power strip & vacuum would plug into the switch, and the switch to your extension cord. You can also switch from auto to manual when needed. I bought it for my system and now I don't know how I got alone without one for so long! You'll love the add-on feature.
If rotating the separator isn't of paramount importance, it's amazing how much pressure drop that flexible corrugated hose, and the sharp turns it makes causes. if you hard pipe, with slightly swept elbows between vac and separator, you can steal a few more feet of corrugated flex hose between the separator and your work.
The French cleats on the side to hold your sanders is a good idea. Using a french cleat system on the walls of a shed or garage can really free up space. The modular design makes it easy to change wall layouts as one adds New tools.
I was looking to make a shop vac storage cabinet, but this is fantastic! I love the added ideas for accessories (esp the sandpaper cutter!!), hand tool holder and adding a power strip right to the cart. Thank you for sharing!
1:05 cart design ideas
1:52 final design
7:52 sandpaper cutter (Amazon find)
8:18 power strip
Great! Glad you enjoyed it. Thanks for watching.
When ever I get a new tool I always shorten the power cord down to a few inches and then atchach a small velcro strip to it by wrapping it arround the cord and ziptying it on, I do the same to my cord reals and extention cords, that way I don't have a huge hassle storing the cords each time I use a tool or untangling them. Makes clean up so much nicer and when I'm using the tool the Velcro locks everything together tight.
I made one similar, but I had a problem that I can see you will have too. The top hose bends way over and cuts off air flow by the separator inlet. I ended up building a little arm that sticks up and over and clamped the top hose to that so it doesn't pinch. Works great. Yours is still much nicer than mine. haha.
Thanks for the video April! If you stand on a 6" - 8" step, I bet you could reach the 4' across your sheet of plywood.
I have been in the building biss for 40 years, I’d be honored to have you make anything for me , great job on all you do , your narration is second to none , very impressive thank you for all of your projects,
Great build! Its nice to see bigger shops like yours still using shop vac dust collection in addition to your built in system (which is super awesome too). Great design and I really appreciate you showing your design iterations and why you went with what you did!!
Great project as usual. You should build a fold out down draft sanding station on the back. A box with holes in the top hooked to the dust collection on hinges. Fold it out for sanding small to medium parts back don when not using. Just my 2 cents.
April, make yourself a single-step about 8"-10" high that can be easily moved around with a handle hole in the middle of the step. Then you could use that step to elevate yourself just enough that you could reach all the way across a full sheet of plywood when cutting on the workbench. I'm six feet tall, but my one-step just makes things go a LOT easier for many tasks. I made mine out of a 2x8 for the step and sides with a 2x4 stretcher to make it a little stronger. I cut an oval hole in the step so I can grab it by hand or just shove it wherever I need it with a little push with my boot. The 2x4 stretcher was lowered so I could grab the step easier and not smash my fingers into the stretcher. BTW, thanks for the detailed video on the Dust Collection Cart. I always enjoy your videos and instructional guides on a wide variety of tasks.
Thanks for the inspiration! I built one last week and one improvement you may consider is adding a boom for the hose. I added it and it’s amazing how much difference it makes.
I have built a similar mobile vac/separator cart, that is also very handy when using portable sanders. And, I don't think that it's just your arms that are too short!! Nice job April!
You need a little 6" high "one step" to get you high enough to reach all the way across the worktable.
You could replace the power strip with one of those ivac type switches, and have the vac and sander plugged into that, so when you turn on the sander, the vac starts automatically, and stops a few seconds after you turn off the sander. Seems like a minor thing, but once you try it, you'll never go back. Accumulation of small advantages like that can change your whole day.
Great job April. I always enjoy seeing the positive that people share in their learnings. That’s what content should be about. When I was a kid my dad used to mount a hacksaw blade to a board and tear sandpaper to 1/4 sheet with it. The blade never dulled. Good ideas get better.👍
Put a paper towel around the filter also make sure to wrap it good and can hold it with a large rubber band I use the blue towels they also sale something like that the same I mentioned in box stores. But paper towels work can use the filter for a long time that way
My dog, "Buddy" says "HI" back! He is also our "wireless doorbell" and does a really good job at it too! Cheers April.
April,
The first time I watched this video I loved your design so much I cataloged it in a '' little black book's. I really have a regular sized note book I keep videos listed in my note book under different ideas. When I first saw this I wasn't ready to make this cart, but so I didn't forget where I saw it, I wrote down in my note book. So, now that I have enough money saved for the components, Today is the day Im building it. Thanks for the idea-a year later!!
Either rig up a fold out step or have a step under the bench ready to step on to get your saw across the 4’ wide sheet. You’ve got this!
I built a combination dust collection unit very similar to yours, but then realized my error when I had to lift the very full, very heavy can from the top. To save my back, I built a different unit similar to your first designs with both vacuum and cyclone separators on the same level. I like all of your conceptual drawings, though, but some make more practical and safe practice than others. The secondary use for storing sandpaper, etc. is brilliant.
April: try standing on a sturdy 10" stool (of your making of course) to give you enough reach for the track saw across 4' of width. Cheers!
I really appreciate your thought process on your builds April, from the design to making the most use of space, it’s awesome!
: ) Thanks, I enjoy the development/design part.
I've seen 3of your videos tonight and liked all as well as subscribed , I don't know if you're living your dream but you're definitely living mine, I literally dream of a shop for my woodworking like yours...you're so blessed !
All I can say is I'm in love
Where do I find a woman who knows her way around a shop like this wonderful young lady
Kudos
Great video April. I have very limited space for a shop but realize how important capturing all that sawdust is for health reasons. I've seen some rather elaborate setups (and expensive) but yours looks strain forward and easy to get going so I will definitely be building it! Thanks for sharing your setup and providing plans. I've become a subscriber!
After living in a construction zone and having to deal with constant dust, I am REALLY liking this!
It is really a fantastic idea
And this unit collect all sanding tools in one movable station..you may say Wilker's Sanding Mobile station..
I really like what you did
Nice work April 💚
WOW Subscribed. Just came here for maybe an idea for my cart. Came away INSPIRED. I didn't think of the power strip...... the only thing I could add is use a good one, and good extension cord,12 gauge if possible. Shop vac and larger belt sander running draw a decent amount of current. Thanks and awesome video!!
The power strip is an awesome idea!!!! I can’t tell you how much trouble I’ve had and never once thought of that.👍
If you still have a blank side panel you could hang or hinge a fold down sanding downdraft platform. If you rearrange your shelves or store the seldom used sanding machines you could get a good size platform with swing out legs. If you can find more room then could have a small compressor and tank for a dust blow air nozzle.
Wow ~ you are the real Wonder Woman ,Great work !
You are such an inspiration April I love the projects you come up with.
Hey April.
Love what you do. I know I'm late getting into the game (this video is 2 years old). I'm just getting back into my garage/shop after about 8 months of lower back issues kept me sidelined. Still playing the newbie card, but I needed to build one of these and got the chance to do so today, thanks to your great plans/instructions and video. Mine is not as accessorized as yours yet, but I'm extraordinarily happy not to have to be dragging around my little orange duststopper bucket any more. Thanks... Next comes the rolling sliding miter saw cart. :)
Build a stand so you get a few inches off the ground, so you can cut the sheet in 1 go :)
I like how you stacked both units April! A smaller footprint is very important in a shop!
I am finishing up a sanding cart/dust separator that incorporates most of your design features (including tool storage, a sandpaper cutter and a power strip, which acts as a motion limiter for the vacuum). My shop-dog's name is Gihli.
I love the idea of having that as your dedicated sanding cart. Very handy. Great job!
I've been wanting to build one for my dust cyclone and vacuum, this design helps me out A LOT. Great video as usual, thanks!
Sweet ! Great build I put a shop light on a 1/2" conduit on mine. Always need good light.
I WISH I could have a shop big enough for a real table saw. I mostly work in a tiny basement of my apartment. No room for a dust collector, but I compensated with a respirator and particle filters. As a bonus, it lets me use VOC filters for finishing in my unventilated basement.
I feel your pain of working in a small space.
Awesome video April, it's great that you can now keep all of your sanders, papers, accessories and dust collection all on one convenient, movable cart now. Did anyone else smell fine sawdust when April started sanding, or was it just me? :)
Hi April, I keep an old milk crate around my work tables. If need be I stand on it when using my track saw to give me an extra few inches on a cross cut. All the best!
Thanks April, your one of my favorites! And this project couldn't have come at a better time! I've been thinking Exactly this and like the smaller footprint for my shop! Thanks for sharing and doing such a good job! - A fellow Texan (from Laredo) living in beautiful Montana
Most vacs like these have an option to use a bag inside the hopper. This greatly reduces fine particles that gets to the filter. Nice design if your stand.
Best design if you ask me; I would have the vac attachments on the side in a bin. Thanks for the playlist of the other designs; I watched or skimmed them all. And in that, gave me a good idea for a caster platform for my tablesaw, which I REALLY need. But I will copy your basic vac/cyclone design.
Love love love love the R&R Buildings hat!!! My wife and I watch both your
and Kyles videos and never miss one! Awesome how he is in north Illinois and you are in Texas, love CZcams for that!!!
Great job April, I hope to meet you in your amazing shop one day to see all you beautiful project...
Well done April, it's nice to look at your work process. Respect.
This went from "just a cart" to "just everything I need" real quick!
After just a handful of videos seen, let me say that with this project you tore all the other types seen! Switch from amazing to stunning :) I should have done it and this will do! Congratulations again!
Maybe you can place 2x8 on the floor to stand on at the end to give you that extra inch or two of reach.
With your shop you should look into a panel saw. I used to build crating boxes and we had a panel saw and you can make short work of plywood. Worked in a cabinet factory years ago and they worked with two of them to cut out cabinets.
Great video as always. Maybe you could build a little locking, slide out platform under your bench, that'd add a little reach to your tracksaw.
I know i'm late but I love the design you went with.
Thanks!
April, if you've got enough space, you could think about have a break-down station, a lower platform you can easily reach right across (or even kneel on) for breaking down full sheets. Keep your track-saw near or with it. Maybe position it between your bulk-sheet storage and your main work areas? Just a thought.
That is really nice and compact. Very useful for those of us that have a 1.5 car garage as our shop!
love the reverse filming when slipping the sand paper shelves in
This works better if you put the shop vac on top and the cyclone superstore on the bottom. Gravity helps keep the dust and wood chips down in the separator where they belong. Also, that blue Rockler “cyclone” is hot garbage - I use mine for scraps next to my table saw. Oneida makes a great one but I am sure there are others that actually work.
Hi April Live your channel
Wanted to say thanks for the Ladder rack on the ceiling Idea. It works great and cost me zero, zilch. nada. I made it all from scrap.
Nice reverse camera action on the sandpaper shelfs...👌
Bold. Beautiful. Genius.
Though i think the chambers should be parallel (not vertically stacked) for better efficiency.
And, you could put a door and acoustic foam inside -- then there'd be no noise.
Just ordered the separator and will be making this. Thanks!
The stacked design is great for a small shop like mine (2-car garage). Thanks for the cut list, April!
Glad it's helpful!
Where did you find Cut List?
April Wilkerson How can I get the cut list?
Craig Leonhard Same Q here?
Small? I wish I had a two-car garage. My shop doubles as storage for several large tools, and many smaller ones, that have nothing to do with my shop work, and I only have 12 x 16 foot (Outside of shop dimension) to begin with. Your shop would be huge for me. Although. if I had a garage, my wife would want to park the vehicles in it and I still wouldn't have space to need the cart. Try to look at your "small" shop as a blessing, you have loads more room than a lot of folks.
Great work, loved the add ons you did with the power strip and sand paper cutter. Well done.
I like the idea of stacking the separator onto the vac. The additional storage is a great idea for a medium / large shop. But I think would be too bulky for a small workshop like a shed or 1 car garage. Since you have a very large shop though, I am surprised you didn't just build the vac and sanding equipment into a specialised sanding bench.
Awesome job, April! Very well done and solves a problem while adding convenience.
I like the reverse shot at 7:11.
That sandpaper cutter was pretty cool. I have never seen one of those.
So jealous of your workspace! I've only got a single garage to work out of.
A separator cyclone is definitely the way to go. The biggest problem I've found (Im from the UK) is the amount of different dust connectors there are for powertools. Nothing seems to be standardised. I just wish all manufacturers would agree on something simple, the port size of a dust extractor.
Excellent video, keep it up! :)
Absolutely loved this contraption you made!
A small step stool will help you reach across the width of your plywood :)
Nice build April. One note I came across somewhere in the depths of WEB, you shouldn't sit your orbital sander on it's hook loops. It is supposed to cause them to flatten and loose their "hook-abillity". FWIW.
Great work! Thanks for taking the time to make, film, edit and share
Great job as usual your video are so clear precise especially when dealing with shop tools like the clamp ing trolley
Dont ever give that hope up maybe next time you will make it! You are awesome
SketchUp is theeee BEST 3D software!!!
Wow! Cool project April!
Thanks!
Have been watching you for a long time now and still love you and your channel. Your amazing, can you teach my wife a few things please 😀😀 xx
Oh Man! I feel your pain on on the inability to reach the end of a full 4 ft sheet cut. even on my best day I am still only 5'8" tall. I end up 3/4" shy of completing the cut every time.
Super build. This is my exact setup and i have been brainstormimg on designs.
If you modify your bottom drawers of your work branch so they have lids and just touch the floor. You could use them as a pull out step to reach all the way across a full sheet of ply.
what you are missing is an i-socket, available at rockler, it automatically turns on the vac when your power tool turns on and then runs the vac an additional 7 seconds to clear the hose. just a thought, stay safe, Russ
7:10 sneaky reverse footage, April ;)
Lower your cutting table April, it won't make your arms any longer but you can lean over more and reach all the way across. :-) I was worried at first that you would be a little top heavy on your cart but adding the sanders on the side lowered your center of gravity so I expect it works just fine now. Nice design and build.
Thanks! Even without the added weight, it isn't top heavy.
Ya, maybe thats why this one might be an improvement over Jays. I think his looks a bit top-heavy, or at least, tall for the width of the unit
I really like the cart and how you incorporated your sanders and sand paper.
Great work, and effective design . Vertical position is the best space saver for some designs. Brgds
Nice setup. Thank you for sharing. Have a great day and stay safe.😀😀
Thanks. I'm glad you enjoyed it. Thanks for watching.
Typical new shop turns into a mess! Keep on having fun April.
Nice I'd only be worried about heat build up in the shop vac
Everything looks great! Only one issue. The shop vac has it's motor cooling exhaust blocked off. the top of the shop vac is right up against the shelf holding the dust collector. You can just modify the design slightly and cut a 6" or so hole under the dust collector shelf to let the shop vac breath and cool. Everything else looks great. Good job.
I found a 6 h.p. Stanley shop vac which has a really small footprint. I found the horsepower is the most important thing in this set up.
You’re a very good presenter. I subscribed to your channel.
Thanks! Hope you enjoy my Channel.
good stuff, I like it. wish i had a shop so i could do stuff like this. been watching a lot of videos like this, kinda my dream job/hobby. Just never got into it at a young age so don't have pretty much anything.
You need something...you make it!!!....nice work April.
@6:05. Another reason I *love* having French cleats on all my hanging wall boards and tool storage.