Video není dostupné.
Omlouváme se.
JEEP HIGH-FLOW EFI THROTTLE BODY INSTALLATION (HOLLEY 112-557)
Komentáře • 136
Další v pořadí
Automatické přehrávání
Should You Install a Bored Out Throttle Body | Dodge Magnum V8BoostedMotorsports
zhlédnutí 42K
Upgrading The Naturally Aspirated Horsepower In A 460 Big Block Ford - Engine Power S11, E10POWERNATION
zhlédnutí 2,5K
FUEL INJECTOR REPLACEMENT (JEEP/DODGE 5.2/5.9 V8)BARRICADE GARAGE
zhlédnutí 84K
天使救了路飞!#天使#小丑#路飞#家庭家庭搞笑日记
zhlédnutí 69M
Který kostým je váš nejoblíbenější? 😭Natyla
zhlédnutí 128K
Jak Mluvit Jako SigmaTaky Bige
zhlédnutí 524K
Holley Sniper UpgradesChris DesertDog
zhlédnutí 93K
Gale Banks Exposes Pedal Commander | Fact CheckBanks Power
zhlédnutí 681K
BRUTE FORCE INTAKE SYSTEM INSTALLATION (AEM 21-8302DC)BARRICADE GARAGE
zhlédnutí 19K
Trailblazer, Clean Throttle Body, Electronic Throttle Control, Codes P0506 P2119wtbm123
zhlédnutí 312K
Watch This Before You Buy a Bored Throttle Body For Your Jeep 4.0Flawed Offroad
zhlédnutí 21K
Accused of not doing a valve job😤Powell Machine Inc
zhlédnutí 1,1M
Holley carburetor return fuel system 101 & ( Mod Gone Wrong!)TPV Productions
zhlédnutí 105K
360 magnum edelbock dual plane diy efiThomas Beyer
zhlédnutí 37K
GM's Throttle Body Injection Was Bulletproof!RPO Restorations
zhlédnutí 49K
Proč první Deadpool nemĕl ústa? #deadpool #wolverine #shortsNerdFix
zhlédnutí 89K
DRAMA MR.BEASTAVidrail
zhlédnutí 272K
Harley Quinn lost the Joker forever!!!#Harley Quinn #jokerHarley Quinn with the Joker
zhlédnutí 26M
STEP CHALLENGE🦶Celine & Michiel
zhlédnutí 8M
Her Survival skills will Fry 🔪 #camping #survival #bushcraft #outdoors #lifehackMarusya Outdoors
zhlédnutí 63M
Poslední Kdo Opustí CYBERTRUCK ho Získá!FIZIstyle
zhlédnutí 168K
Sad To Announce I Did Not Qualify For Mens 2024 Olympic Gymnastics TeamThe Rock
zhlédnutí 27M
Pool Bed Prank By My Grandpa 😂 #funnySKITS
zhlédnutí 18M
This channel has helped me so much with my 5.2l zj. Embarrassed I wasn't subscribed sooner.
I like this guy videos..straight to the point no extra unneeded commentary.
I'm at 226,000 mi and running strong thanks to your channel.
I just got a 1997 5.2 I wish we live close u do some dope shit to your jeep n your lady u got skills n I would like to do some of the dope things on mine god bless keep banging out great vids
simple and to the point! keep up the great work!
The new intake looks great! I did see one problem that you will need to tackle next. Your fuel gauge seems to be stuck in the Full position. I have never met a ZJ with a full tank of gas! 😂
very nice work..im very pleased for you with this upgrade..well done.
“The janki way out” 😂😂 thanks for the laugh. I enjoyed the Vid Dude.
I had to laugh at that one too. Yeah, I've taken the janki way to fix stuff too.. nothing wrong with that!
5:30 Love that reaction Brahhhh!
Ahhh yes, old school tunes blasting. Nuttin like a lil Tribe Called Quest Barricade!! One of the best hip-hop groups from the 90's.
Love your videos broski. Up from AK. Remind me up my buddy deontae. No problems, just solutions.
Excelente video brother saludos de Tijuana BC México profe
Gotta love that tribe called quest bumping in the jeep
Not so much really lol but to each his own
Appreciate this video as well, like the details on the little hidden mods that need to be performed , also that was one of my favoriteTribe called quest tracks🙏🏾💪🏽💯💯🔥
Hey barricade I'm loving the videos just found out about you in the past few days and how that happened I do not know cuz I really like it....but I just got a 91 Jeep Cherokee and I want to put something like this on it is that possible for the for the four litre....
Great video as always, I'm looking for my next ZJ now, so if It happens to be a V8 I just might have to do some mods, other than lift, shocks and tires..
You are the JEEP Yoda master.
Hughes engines offers a 1050 cfm throttle body that bolts right up and I noticed a gain with my 5.9. Itll work on a 5.2 too, idk if it really flows that much or if its 52 or 54 mm but I definitely seen a gain. And it was only about 180
The Hughes TB is less than 50mm.
@@BLKDAK74 just mentioning it tho because of the high flow potential to the cost. I dont know if you seen the same one either but i bought it, and its bored out cause they did a shit job. Its only 1007cfm too but bigger bores dont always mean bigger cfm even if they say. But at least they made a quality piece. Im not trying to stick up for hughes or endorse them at all just the cost benefit. Which i dont think was all that worth it.
Great videos
First of all, I'm loving your channel. I've done more on my Jeep in the last week than I have ever done on all my cars in the last 20 years. Thanks for that. I live at about 7,000 ft and the jeep seems a bit underpowered on the highway when on an incline. My daily driver has a turbo, so I don't notice any power issues with that vehicles. I have put a throttle body spacer on, which seems to have helped mileage a bit and initial throttle response, but I don't notice any help while climbing 5% grades. Any suggestions to help me get the power I should have at this altitude? Any sort of Tune that can be done? Do I need headers and an exhaust? Is it crazy to ask if there's any sort of turbo kit I could add on? I'm not looking for crazy power increase, just getting it back to where it would be at sea level. Thanks
Im not really sure. Do you have the V8 ZJ?
BARRICADE GARAGE I do have the 5.2L. I don’t know why I didn’t do plugs earlier. I haven’t taken it out yet, but it seems to run way better with just plugs. Fingers crossed that’s all it needs.
I have similar issues at 9,400' elevation. My first change was to use 91 octane fuel exclusively. I also turn the OD off on most any incline, except when I have good momentum on the expressway. I watched this to see if there was an increase in the intake air volume, which is what the engine is wanting at high elevation. It seems to be the most straight forward solution. A supercharger option would be preferred over a turbo, as there is a much lower threshold, but such is life in the thin air.
Are you a mechanic?
Valve cover's are on backwards bro nice vid tho 👍
Great post bro , keep grindin
Where can I buy the throttle Body?
In some purches I got a huges throttle body . Put it on my 2000RT
It ran horrible. Put back on the shelf and one day I held it up to the light and I seen light all around the butterflys back on the shelf it went . One day I picked it up again. And realised it was adjusted . Backed the screw down and it looked better. It was getting to much air at idle. So one goes the m1 that huges .
Very nice vid.
Hi, im french and i m looking for a parts (stock air) for intake air.. Nothing in France, which store i can find.. Your vidéo are great quality. Merci
Nice upgrade nice video
Yo this guy is the business
Nice valve covers...what motor 360? What spacer?Please get back
Hello was wondering where that vacuum line leads to?, cause mine is not connected and I can't even locate the line...
What serpentine belt are you running on there? I can see that it's not turning the AC pump and I've read that you can't get a shorter belt and have all the pulleys still turning the right direction, but clearly something is different here.
No doubt, you are good!!
Good day sir!
I was just wondering I have followed your lead on the Holley Throttle body. I could use a little adjustment as my high idle seems to stumble like a closed choke. It's not terrible but it doesn't start up strong it just kinda goes right to an idle when cold. Any suggestions on how to adjust the plate with the provided adjustment screw? Thanks1
And has much power right now whit it?
The factory tb is also made by holley
Nice.
En que lugar compras las piezas de tu jeep zj?
Does the factory throttle body say Holly on it? Because mine's is Holly on it
"Bruh!"
Did you have problems with a whistling noise after this install im trying figure it out rn
Can anyone get me a part number for the cable at 2:38? Mine is broken and since my truck is 318 swapped and I didn't do the swap, I don't know anything about the parts used. Thanks.
Did you notice any improvements to performance or fuel economy with this throttle body?
No improvements in fuel efficiency but the Jeep pics up speed faster on the mid to high end for hwy driving and passing power. Big difference there
Where did you get that throttle spring piece? Looks like billet. Looks good on there.
not to be negative but the air cleaner mounting plate is very restrictive. use a bent piece of all thread and toss it.
Why everyone has no belt on the AC?
Did you need a tune afterwards to start it up? Or did it run normally?
Ecm should relearn
where can i get that intake that one black one that you had to modify to make it fit?
Does this fit a 5.9 Dodge ram 1500 gas
I recently took my 52mm tb off and put my stock tb back on. I feel like I actually lost power and mileage with the bigger TB. Getting rid of the restrictive stock airhat was good thing though.. I lost about 1-2 mpg with the 52mm. I'm gonna put the stock aibox back in next and see if that gains more mpg for road trips..
Did you gain anything other than losing mpg?
transam8607 It wasn't obvious if I did gain power. It just didn't seem worth the money at all. I could try it again with stock plugs as I was using colder plugs that didn't seem to add anything good either.
I kinda thought it wasn't going to do much either
I think the only way to get gains from a tb would be if you upgraded heads and or headers and upgraded intake manifold and you would then need a tune. Lot of $$$$ . I hear it's worth it.
Not really worth it for my daily driver I just have a full exhaust. Maybe I'd rather spend the money for some kind of tuner kit
Where did u get the air intake attachment bracket?
Nice job!
...but I think You have to check the oil pressure, it's to low!
Bearings, oil pump... some good stuff for a new clip ;-)
Greetings from Germany
Thats normal for all my Jeeps. It goes up during normal operation and im not at all worried about it
How much for this throttel body buddy?
You need to split thst airhat, & add an inch to the size
So have you tested it to see what you gained from it? Is this the only mod you did?
Did you notice any major improvements after this?
That sound tho 😍
Just put this on my 98 Dodge Ram 5.2 any reason why it would make 1st to 2nd gear shift funny? Had trans redone last year it can’t be that. I’m guessing the spring is tight because it’s new made my gas pedal tight. Any answers to my question? I’m a chef learning mechanics lol
you might have messed up the adjustment on your Throttle valve cable on accident.
Where did you get that head unit from?
Boss BV8970B
But its no longer for sale anywhere. I ordered it through Ebay 2 years ago
That seems like a lot of annoying little modifications to get it to fit. I guess it depends on how much of an improvement it is to know if they are worth it.
Great job as always!
It was very annoying. I wasnt happy about it
was it worth in your opinion? I'm thinking about adding
@@darrianbenjamin7292 yes it was worth it. And this intake system fits the new throttle body like a glove without any modifications...
czcams.com/video/aCBElQOezg0/video.html
How much horsepower gain from this than stock
Great video. 1 question: Would the 4-barrel be better?
Nope
I need it for my truck.
Did you do a plenum video yet?
I havent done that yet
What cut off tool is that?
Any more pull?
Do you know why this wouldn't fit my 94 zj 5.2 the application says 96-2001
Pre 96 5.2 are a little different
Man could you tell a big diff in performance?
Пушка)
👍👍👍
Awesome video man. I know I'm late, but have you noticed an improvement in power,mpg, throttle response ? I just got a 96 ZJ and am looking forward to building it lol I get that twinkle in my eye when I look at it. Thank you and I apologize if you've already answered this in advance.
It has more passing power on the highway if that makes sense but I didnt gain anything on the low end linke accelerating from a stop. The fuel injectors is still one of the best investments ive made in my Jeep. That gave me instant throttle response with a smoother idle
czcams.com/video/xVq8uEdnMsg/video.html
That gasket tho
Where did u get at
I ordered mine through Ebay
How do you get enough clearence for the spacer!? I Did not work om my 5.9
Not sure but it fits fine no problem
He doesn’t have the stock too to the intake it’s after market and shallower
Put on on my 5.2 Dakota and am not impressed with it at all thankfully mine was a junk yard find and didn't cost anything if I would have spent 500 bucks on it i would be one disgruntled fella lol
There used to be a guy on eBay making these for cheap.. $150 I think..
Yup. You send your TB in and they bore it out to 52mm and send it back. Theres also different companies that make them like Fastman, Hughes etc, but since Holley made the OEM throttle bodies I wanted to go with their Performance Version.
I got a 52mm from flyin Ryan for $150. Not as pretty, but no modifications required. Wish I had port matched my spacer and kegger opening before putting it all back together.
@@HokieD1993 how do you like that modified TB and did you have any other mods done prior to putting it on?
@@barricadegarage5361 yes I have Thorley headers, 3" exhaust with Magnaflow cats, Flowmaster muffler, MSD ignition coil, e-fan, 180 thermostat, cold air intake modded to work with Spectre 98499 air hat. Definitely you need to toss that air hat you got now. So restrictive.
You got more power with these?
Yes
@@barricadegarage5361 i liked ur cars and you work im zj fan good job
What a nightmare to adapt the throttle body ,good job
What stereo head unit is that?
Boss audio, they are discontinued
Whats the part number of the carburetor spacer?
Black Path 48867
BARRICADE GARAGE what an awesome channel bro, I have a zj too and your videos really help me a lot keeping doing. Greetings from Mexico 🇲🇽
Can you give a up date
The throttle body barely made a difference on the low end after new injectors but I definitely have more passing power on the hwy. Not worth the $500 I paid for it (performance wise) but its nice and I like
@@barricadegarage5361 thanks for your sincerity. Will keep stock.
Holley carbs are way better than Carter carbs, no matter the vehicle
Is that smog legal?
All my moniters have come back and no check engine light.. So yes, its legal
How did you like the performance difference did you like it and think it’s totally worth it ?
@@sergioperez-bh3xp im working on follow up video covering that very topic
Link to the part ???
I ordered mine through Ebay but its pretty much the same price with every vendor...
www.ebay.com/itm/Holley-Throttle-Body-Twin-52mm-Fits-Dodge-Dakota-Ram-1500-2500-5-2L-5-9L-EA-/333173755312
How about those valve cover up side down bruh make sure that throttle body is the right way. Throttle links in driver side👍
You know you're a poor boy that made the wrong stuff work for too long when seeing you pull out that vacuum connector kit sexually excited me.
P.s. this video is shockingly well done. I honestly didn't know it was possible to get camera angles of all the things you need to do. All the videos I've ever used just implied where things were, vaguely in that direction, and I always assumed there was no better way.
My finger tips, and knuckles are so raw I refuse to go within 5 feet of my engine bay anymore.
Gas mileage?
👍👍👍