Tools needed- pry tool, pocket screw driver, #2 Phillips screw driver, impact driver or ratchet with extension. Any questions let me know in the comments 👍
Today, as of 5/27/24, I replaced the ballast for my 2013 Infinity g37, all thanks to you. I have no mechanical skills and watching your video saved me money and gave me a sense of confidence in doing things on my own. Thank you 😊
That was cool. The Infiniti dealer wants to charge me $1,800 to do that. Now, I can order new headlights and take on the task. Then, I will install some cold air intakes. thx for uploading the video ...
Thanks for this! One major point of interest is that one bolt that everyone says you need an extension for is easy to get to without either an extension or deep socket. In fact, it would be more difficult with a deep socket. Simply go around what's in the way. I did the entire bumper with a 4.5" mini socket with 3/8" drive. 2009 infiniti G37 Coupe (Journey) here and only had the first wire harness to remove (only one). The OEM already had a ballast with all the other cables coming from the one. Initially it was tight to get to as what I saw you deal with and once it was out I saw that it was on a rail which is part of the headlight and had the easy ability to be slid off to allow for 5 or 6 more inches of slack. Wish I knew that then. I did most of it one handed as I held my phone and recorded. I will upload the video to one of my other channels next week since I'm still waiting on the now delayed headlight housings. Amazon doesn't like me I guess. Good thing I have my work truck or I'd have to put it all back together while I wait.
Thanks for the video dude. I saw that you were holding the light. I want to tell you to try investing in an headlight it goes on your head, but check out different headlights, it comes in handy.
I just bought Akon new headlights and they just got here and watching this video I’m hoping to get them installed instead of paying $2500 at dealership
Me: My cool G35. Gonna change my bulbs and do all sorts of cool things to it. DRL and all. Here I go. Looks ez. Me starting to disassemble: WHAT A PIECE OF JUNK! Damn wires. So short. Man my hands too big. Off the wheels go. Damn I can't get the fog light in wtf. Man I just wanna...DAMNIT. I LOVE MY EX35. This piece of shit. Me after fixed: Pretends it was easy. What a cool car. Whew. Drinks 2 Gatorade. Damn. Prays to Nissan GOD that the drl doesn't die or the bulbs.
Sorry for late reply but should be very similar if not the same! I’ve never worked on a m37 but Infiniti’s make them similar too each other of course. Thanks
I have a 2013 (bought a couple years ago, used mint condition) however, the headlight covers are old. It’s hard to see at night while driving because the headlight covers are all “foggy” so the lights don’t shine bright as they would if the headlight covers or lenses were new and clear. How do I replace them?
Today, as of 5/27/24, I replaced the ballast for my 2013 Infinity g37, all thanks to you. I have no mechanical skills and watching your video saved me money and gave me a sense of confidence in doing things on my own. Thank you 😊
That was cool. The Infiniti dealer wants to charge me $1,800 to do that. Now, I can order new headlights and take on the task. Then, I will install some cold air intakes. thx for uploading the video ...
Same here. Dealership wants almost $2k for the headlight and installation
In California 3500 for parts not including installation
I want what these dealers smoking
Man you're legit saving my life! It's so hard to get good info on how to do things for these cars.
Thanks for this! One major point of interest is that one bolt that everyone says you need an extension for is easy to get to without either an extension or deep socket. In fact, it would be more difficult with a deep socket. Simply go around what's in the way. I did the entire bumper with a 4.5" mini socket with 3/8" drive. 2009 infiniti G37 Coupe (Journey) here and only had the first wire harness to remove (only one). The OEM already had a ballast with all the other cables coming from the one. Initially it was tight to get to as what I saw you deal with and once it was out I saw that it was on a rail which is part of the headlight and had the easy ability to be slid off to allow for 5 or 6 more inches of slack. Wish I knew that then. I did most of it one handed as I held my phone and recorded. I will upload the video to one of my other channels next week since I'm still waiting on the now delayed headlight housings. Amazon doesn't like me I guess. Good thing I have my work truck or I'd have to put it all back together while I wait.
Glad you found an easier braa. Thanks for sharing
That’s insane. In my
Genesis coupe I could change that light in about 3 min lmao I’m doing my girls g37 and never noticed how hard it was
Awesome video, used light to brighten dark areas also showed both side of the parts being removed,before and after removal .
Thank you so much.I'm thinking about exchanging ballastors. Thanks to you, I gain confidence to do well.
You are a life saver bro. Great detail... you saved me a lot of money.
Thank you! Great vid 👍🏻
Thank you sir!! You saved me alot of time and headache. God bless!
Thanks for the video dude. I saw that you were holding the light. I want to tell you to try investing in an headlight it goes on your head, but check out different headlights, it comes in handy.
Exactly what I was looking for, very detailed. Thanks 👍🏽
Best tutorial for sure 🔥
Thank you and very detailed. Now the hard part is actually doing it. I’m planning on converting my HID lamp to LED, so this is an excellent tutorial.
About to try this on my daughters 2010 sport. Wish me luck!
I just bought Akon new headlights and they just got here and watching this video I’m hoping to get them installed instead of paying $2500 at dealership
Me: My cool G35. Gonna change my bulbs and do all sorts of cool things to it. DRL and all. Here I go. Looks ez.
Me starting to disassemble: WHAT A PIECE OF JUNK! Damn wires. So short. Man my hands too big. Off the wheels go. Damn I can't get the fog light in wtf. Man I just wanna...DAMNIT. I LOVE MY EX35. This piece of shit.
Me after fixed: Pretends it was easy. What a cool car. Whew. Drinks 2 Gatorade. Damn. Prays to Nissan GOD that the drl doesn't die or the bulbs.
This guy is Canadian, I Subs
now you need to remove the side panel and rear bumper haha
Thanks for making this
Appreciate it my guy
Thanks for this! Removing mine to have them refinished lol
Great and on point video
thanks so much for the video. God bless you
Nice video.. next time unplug the lights from underneath.. just move the fender liner aside
Great stuff....
love the vid bro
Great video, thanks bro.
Muy buen video gracias
Nice....so I could just buy new headlights and install them?
Great video
Great step by step video bro
Nice and easy
Great video. Is the same for
infinti M37 S 2011....?
Help me Please.👍
Sorry for late reply but should be very similar if not the same! I’ve never worked on a m37 but Infiniti’s make them similar too each other of course. Thanks
hello sir is that possible bumper 2013 model install to 2009 model infiniti g37 sedan
Comment for the algorithm gods.
I have a 2013 (bought a couple years ago, used mint condition) however, the headlight covers are old. It’s hard to see at night while driving because the headlight covers are all “foggy” so the lights don’t shine bright as they would if the headlight covers or lenses were new and clear. How do I replace them?
What about if bumper has fog lights?
Unplug them just like he did the main light and you are good to go.
thx dawg
I did not need to remove bumper to access the light, but did have to remove the tires. Keep in mind, i only need to change the bulbs, lol
Udk if theresa difference between the g37 and the q60 but i cannot reach the fkn wires at all bro. Idk how to press the tab
Good video, but i dont like this Infiniti car.... to much work
is it same processs for a 13’ sedan?
Yes
Easier way in the wheel well bud
What year is this car?