Oakley x metal pushing IN the PINS
Vložit
- čas přidán 27. 08. 2024
- A better way to get the pins in
This will work for the models:
Juliet
Mars
Xx metal x
NOTE:
in the Oakley penny frame seems to me the pins are larger, be prepared with a flat head screwdriver.
I will make a video for that specific frame.
Like comment subscribe.
Next video,
How to make gasquet for any model.
(Yes any model,
why pay $ 12.00 for 2 little piece of plastic?)
Thank you so much for such a great video. I've been looking for this kind of video for the past 20 years! 😍
i had more success with long nose pliers, covering one side with cloth (or heatshrink tubing) the other bites on to rivet. I had to apply very little force as i could align it with my other hand. With the hammer you don't have spare hand to adjust the alignment - it has to go through true and it will go through with relatively little force if it is correctly aligned and 'snap' when it has gone through.
thanks seems very easy watching you. l'm going to buy the hammer and the 1/32 2/32 3/32 inches screwdrive kit. my R2 is polished maybe l'm going to pay a jewelry for a polish work before assemble it once and for all
www.prozoneuk.com/
Buenos días DIOS TE BENDIGA, tengo uno lentes de esos mismo y necesito ese trabajo, cómo haría para hacerlo , estoy aquí en usa
Thank you
Hello, can u share with me, kind of tool u using. Much appreciate your help.
How do you push the pins out?
Hola amigo, te agradezco por en enseñar me a reparar mis gafas pero no se como encontrar los pines. Me puedes ayudar?
Los encuentras en mercado libre o en Amazon tmbn
Saludos
Can you make a video showing how to make your own gasket please?
Possible tricks to remove the rivets without your other tools?
I have the same pair and need new gaskets, all new rubber pieces, and lenses. Can you tell me where I can find these parts? Thank you.
Shawn G.
Very good news! Oakley is selling again rubber kits for Oakley Juliet I believe $10 .00 the whole set, if you can not find it, the place to look for EVERYTHING Oakley is:
Oakley forum.com
The Oakley's brotherhood.
Or eBay.
see my post above ;-)
www.prozoneuk.com/accessories-1
Which one is more collectable xx or juliet?
Con que hiciste la base para sostener el lente y cómo consigo las herramientas que usaste ?
I have the same problem with my juliet,where did you buy the replacement peice
Danilo Medoruma
eBay Note if you can, buy 2or 3 because the shipping will be the same for 1 or for 6 I got mine from Japan, in eBay there is another dude that sale out from USA and the shipping is free, but don't know the quality.
Ga Za. ,Yap notice the label,im also here in Japan.i check it from amazon it's 1000yen for 1pair.
www.prozoneuk.com/accessories-1
Hi do you have a link to the video of how to make a gasket?
Thanks
Where did you buy parts?
Lowes / home depot
If you are going to do a penny don't do it is very hard to put it back together
.
So I've been trying to get my Penny's fixed. Followed the steps in the video. Pins were tough to get out, and then to put them in they pushed most the way in fine, then I started gently tapping to get them in, then harder, and then ALOT of force and I still can't get the pins in. Any ideas? Here is a picture of how far the pins are through. - www.screencast.com/t/tAreIbSP
Eu sou o BR q cê procura 🇧🇷
use a pin pusher
hammer in the pins ?????????????????????????????????????????????
ask any optician
not in a million years will anyone abuse my glasses like this
haha just take carefull,everything needs a hammering
I bought a pin press and if these pins arnt lined up no way
my friend couldn't do it with a press the pin was like a bullet only a true mug would do this to 600 pound glasses
i know
@@zebedeerotten533 or a pro
@@lunch2102 :)
Sir, may i ask where can i buy that nose bridge tools? Your reply is highly appreciated