Is it necessary to have a 20moa mount? I mean the scope has 35mil of elevation or something close to that, isn’t that enough? Or am I missing something?
35 MRAD elevation yes, but you got about half of that once you zero your scope, same thing with all scopes, you do not get the max elevation, never, unless you have canted mount
Have you had to send it back for the nordic paralax fix? A guy here in northern sweden had sent back 4 or 5 ZCO scopes for paralax fix during cold weather shooting. Great videos as usual!
One of my 527 went to Austria, it had something on parallax, but they did fix it in a less than a week. I read that from Instagram, not sure why it happens in here at north. Is it colder that other places in world😁
Hello from Ukraine buddy, I have a problem, I can only lower the turret down at the zero mark, for example, if my zero is not correct and I make a couple of clicks to correct it. and therefore I try to lower the drum in order to shoot at the grid in the future - I cannot do this. I can only lower the turret down at the zero mark, it is very inconvenient when there is no tool at hand
I had to set video speed to 25% to appreciate the brass catch at eject ☺
😁
Very good shooter
🙏🏻
Is it necessary to have a 20moa mount? I mean the scope has 35mil of elevation or something close to that, isn’t that enough? Or am I missing something?
35 MRAD elevation yes, but you got about half of that once you zero your scope, same thing with all scopes, you do not get the max elevation, never, unless you have canted mount
Have you had to send it back for the nordic paralax fix? A guy here in northern sweden had sent back 4 or 5 ZCO scopes for paralax fix during cold weather shooting. Great videos as usual!
One of my 527 went to Austria, it had something on parallax, but they did fix it in a less than a week. I read that from Instagram, not sure why it happens in here at north. Is it colder that other places in world😁
@@PassionforRifles Yeah they are aware of it and seems like an eazy fix on their part so nice that the customer service works!
Hello from Ukraine
buddy, I have a problem, I can only lower the turret down at the zero mark, for example, if my zero is not correct and I make a couple of clicks to correct it. and therefore I try to lower the drum in order to shoot at the grid in the future - I cannot do this. I can only lower the turret down at the zero mark, it is very inconvenient when there is no tool at hand
Once you have set the zero, you need to turn the turret screws loose, and turn it all the way down. Set the zero marking and tighten the 2 set screws.
@@PassionforRifles You did not understand correctly, link with video here
czcams.com/users/shortstVcQHx6QbNo?feature=share
@@user-nu3fi1cv4w I see. You did do the zero set right, and i can see, that the zero is in line with the body marking. Strange🤔
What rings are you using?
Audere