@gabrielfrancis1181 Welding all those pipes together is not easy and takes a fine hand because cutting welding a setup like that together takes a lot of time and work.... & you can only do it once, maybe twice to get the job done right or else you have to cut and start over. I'd say the exhaust cost well over $5,000 just by looking at the welding and how the pipes were cut.
I was looking at that exhaust hole facing the wrong direction and thinking “damn that must creat good vacuum letting the air out more” but the more I studied it the more I noticed how silly it all is 😂😂😂😂😂😂😂
@@mojojoji5493 it's probably a hemholz resonator. Sometimes called a j pipe resonator for the shape of the pipe. The end of that fat section would be capped. A j-pipe (it can be any shape but they are usually tucked up next to the tailpipe for space reasons) can work in 2 ways. 1 reflected waves, or 2 hemholz resonance. Reflected waves work on sound waves moving through the exhaust gasses and hemholz works on oscillating gas motion. Reflected waves work entirely on length and can be calculated by the speed of sound. You would find an offending sound you want to quiet and make it so when that frequency enters the j pipe and reflects off the closed off end and makes it back to the entrance of the j pipe it will be off in phase from itself and create a vibration inverse to the one you want to get rid of. A hemholz still creates an inverse vibration but the gas in the j pipe acts more like a weight of a pendulum and the gas in the chamber at the end acts like a spring which acts as the gravity in the pendulum analogy. It a way of flowing as a straight pipe but making things a little easier on the ears and possibly more musical
@@jaytibbylucky it wasn't a menu in starbucks The maze wud have mazes in them n they'd all lead to Wendy's 😂😂😂 Imagine them trying to name those parts🤯🤯 The prize wud be them giving a cup of coffee With ur name spelled correctly Barely And in hieroglyphics
Are y'all high or blind?? theres definitely still all 4 cans. The lighting gets a bit darker from the last shot so those smaller 2 got hidden in the shadows of all that mess...
@@bigusdickus3068nah you’re wrong. The last shot only has 2. The left might still look like 4 bc of the other shit behind it, but there’s definitely just one pipe each side, only the very last shot when you hear the last rev
We're is the turbo at??? Take a screenshot an circle it cause I don't see no remote mount turbo.. Unless it's a Bluetooth turbo setup I don't see one..🤣😂🤣😂☠️☠️☠️
42! Honestly I'd expect its for a unique sound but does look a little over kill, almost looks like it has fresh air intake/collectors at the side too, interesting tbh their could actually be some science going on....
That is one beautiful titanium exhaust somebody spend some hours on that I give the person props to build a not exhaust Annie built a jack-up point that is a beautiful exhaust
I thought i was trippin thinking wtf, have i missed something in tuning, never seen such a crazy exhaust. I feel fine now ive read the comments, its definitely not me lol
Welder sent a kid to college with this one
Bahahaha
And in school they ask him him where he comes from
Son: "huh sound comes from exhaust... No no no... Engine zhitty car zhittier
😂😂
I don't get it
@gabrielfrancis1181 Welding all those pipes together is not easy and takes a fine hand because cutting welding a setup like that together takes a lot of time and work.... & you can only do it once, maybe twice to get the job done right or else you have to cut and start over.
I'd say the exhaust cost well over $5,000 just by looking at the welding and how the pipes were cut.
10/10 for welder
4/10 for owner
Yuuup😁
Agreed that exhaust going to be scrapped in a few months the exhaust looks good just needs to be tucked away
EXACTLY! HAHAHA
Была одна труба, потом подключили водопровод от пятиэтажки😂😂😂😂
😉😉😉😁😁
"One bump and it's all gone"
probably because it sounds like crap at higher rpms
69th like😂
Silencer on road 😂
@ProfitSnipper 😊😊😊
Owner, I bought 30 m of this pipe.
Welder: I got you
Soviet mindset: I have 30m of pipe... I should use 30m of pipe
😯😯😯😯
😊😊😊
Owner: Price is not a problem
Welder: Say less
Bash bar, rear defuser, and exhaust all in one 😂
😉😉😉😉👌🏻
🤣
WtMF
What a mess and waste of time and money 😂😂😂
Nice pfp a person of culture I see.
My man designed his exhaust using the Snake Game from an old Nokia phone
"how much stainless pipe should we buy fur that 86's exhaust, boss?"
"All of it."
I feel like this exhaust is the definition of: Work HARDER not SMARTER
en la mecanica no hace falta tanto escape
Thay's the Asian way 😂.
😂
Biblically accurate exhaust
10/10
Seven trumpets exhaust 😂
Nah if it was biblically accurate it would have a talking snake slithering out of the exhaust.
@@LisaAnn777 who says it doesn't?
@@paradoxworkshop4659 I didn't see no snake 🐍
All those twists and bends just for it to sound exactly like it did with a straight pipe.
😊😊😊
WE FINNA WAKE UP EVERYONE AT 3AM WHIT THIS ONE🗣🗣🗣🗣🗣🗣🗣🗣🗣🗣🗣🗣💥💥💥💥💥💥💥💥💥
Were about to send this one back to elementary with this spelling
Shop: Do you want quads, dual, down pipes, mufflers, or straight pipe?
Coked Out 19yr Old: Yes
Brooooo i almost broke a rib laughing at this one! A lol wouldnt have done it justice. 😂😂😂😂
Bro wanted the steam punk build
@@therealsyxx😊o😊😊😊😊😊😊😊
IT looks redic if you ask me.. Like the crap sticks out farther than the sides of the rear bumper...
The most inefficient exhaust in the world
Customer: “I want to melt my tires but look really cool doing it”
Exhaust welder: “Say less”
That aren't pipes aimed at his wheels, looks like mufflers to me.
Those are resonators.
They’re Helmholtz resonators
There is so much pipe the exhaust would be stone cold by the time it got there.
@@Tommyturbo1981can u not read gang?😊
When fashion, or attempt at fashion, becomes more important than proper exhaust flow.
On the bright side, it matches that biplane wing perfectly! 👌
Officer: is there car stock?
The car in question
😯
This reminds me of when I was a kid and started slapping Legos together and just kept going until I ran out of Legos.
Ha ha. Love this one.
😂💀🤣🤣
😂❤
Lego
@@Clynikal my Eggo
Customer - “I want an unnecessary amount of tail pipe”
Shop - “yes”
lol 😂
😅
Right,! Someone needs to tell this man that the same exhaust sound can be produced with 95% less exhaust pipe and only two mufflers not 24 of them 😂
@DangItdoyourresearch But THIS, is the pre-spaceship model. Stop hatin lol ❤😂🎉😢😮😅😊
it’s trippy sounds nice
"Exhaust can heat up so bad that the fumes can burn the tire" -A wise lil dude
Thats not a exchaust, thats art!
😉😉👍
It aint exchaust because that isnt a real word
@@thejman5552 Boring life u got since you needed to get of your chest 😂😂
Oh lord God, its the language police
@@nicolais6395 I do not have a life "of" my chest.
That's not an exhaust system. That's a cardiovascular system
Yeah it’ll make your heart stop 😉
@AEO21Productions it sure will make my heart stop.. from how hideous it is.
I don't understand why your comment doesn't have more likes😅
Maybe it's because people don't know what the cardiovascular system is😂
@@dinomonica7001 wouldn’t surprise me 😂
@Frankman232 😊😊
His exhaust has become self aware. 😮
I was looking at that exhaust hole facing the wrong direction and thinking “damn that must creat good vacuum letting the air out more” but the more I studied it the more I noticed how silly it all is 😂😂😂😂😂😂😂
@@mojojoji5493 it's probably a hemholz resonator. Sometimes called a j pipe resonator for the shape of the pipe. The end of that fat section would be capped. A j-pipe (it can be any shape but they are usually tucked up next to the tailpipe for space reasons) can work in 2 ways. 1 reflected waves, or 2 hemholz resonance. Reflected waves work on sound waves moving through the exhaust gasses and hemholz works on oscillating gas motion. Reflected waves work entirely on length and can be calculated by the speed of sound. You would find an offending sound you want to quiet and make it so when that frequency enters the j pipe and reflects off the closed off end and makes it back to the entrance of the j pipe it will be off in phase from itself and create a vibration inverse to the one you want to get rid of. A hemholz still creates an inverse vibration but the gas in the j pipe acts more like a weight of a pendulum and the gas in the chamber at the end acts like a spring which acts as the gravity in the pendulum analogy. It a way of flowing as a straight pipe but making things a little easier on the ears and possibly more musical
@@mojojoji5493it could actually keep the tires warm if not for all the other exits
venturi bernoulli effect. Marty said "it's worth a google"
Owner: I need a roll cage for my muffler.
Mechanic: how deep are your pockets
Owner: very deep
These exhausts are what my dreams are mdae out of 🎶😌😌
😊😊😊
Its like those mazes on the kids menu, you need to find which exhaust line is the real one connected to the engine
Funny
Gud one bruv
Then that maze leads to a bugatti or a cruise liner😂😂😂
😂😂😂
@@jaytibbylucky it wasn't a menu in starbucks
The maze wud have mazes in them n they'd all lead to Wendy's 😂😂😂
Imagine them trying to name those parts🤯🤯
The prize wud be them giving a cup of coffee
With ur name spelled correctly
Barely
And in hieroglyphics
😂😂😂
😂😂😂 no that's all I can see
That one tiny little pipe leading into the mess is somehow hilarious to me.
😯😯😯😯😯
That little pipe is fighting for his f**king life Lol
dude i didn't even notice that lmao.
Exactly haha 😂😭
that’s the first thing i noticed absolutely hilarious😂😂
なんて美しい造形なんだろう
Gives a whole new meaning to tubular. 🤣
It still sounds like a straight pipe 4 cylinder 😢
👍👍👍
@johnnyscarbon I think he meant that it's kinda pointless unless you like seeing all that exhaust 😂
😂@@TehAntiSpammer
It sounds slightly better than the straight piped Jetta that goes hard in my neighborhood. 😅
@@CasualSpecsounds like my 99’ clapped out s10
Bro turned his exhaust into tire warmers
Perfect for drag racing then 😂
It looks more impressive than it sounds. Put that bad boy on a V8 or even better a v10. That is some serious welding. Respect to the welder.
Sounds EXACTLY like when I cut the muffler off my 350z in high school and used parts store flex pipe to dump out the back. Congrats.
😯😯😯😯
Gr 86 owners will do anything but add power to their car.
5000 dollar exhaust just to run a 13 second 1/4 mile
@@jacobc9104 13 is incredibly generous
i wouldn't be surprised if they lost power with this one
@@jacobc9104 13 seconds is pretty optimistic.
@@jacobc910413 second 0-60 you mean
Welder: quote is around is around 1500. Client: I have 10k to spend.
Welder: say no more.
🥸😂
😂
Literalmente isso
Jokes😂
😂ahahah
The car, the exhaust , the owner has got to have an Edgar haircut
Bro broke the world record for the longest and biggest exhaust pipe😂😂😂
😊😊😊
Customer: I need back pressure
Mechanic: I gotcha
it’s gonna be so choked up at the midpipe, there’s like 80 feet of exhaust once it splits
Shop,how complicated do you want the exhaust system? The owner,YES!!!🤣
...but it has to be as useless as possible too.
He bought is length of dual piping 2x just to have that usless weight on the back wtf happens to the world
Kamu nanya
My favourite part about it is that piece of pipe in the middle, that isn’t even connected to the exhaust. 😅
“Yeah, I like Panera. Yep, gonna get started in a few minutes”
Like what the fuck lol
😊😊😊
The guy manufacturing that spaghetti yes of course you need all of that😜🤑🤑🤑
😅😅😅
Did you notice that 4 exhaust pipes turned into 2 exhaust pipes at the end of the video?
Definitely does
Did it
huh..... interesting
Are y'all high or blind?? theres definitely still all 4 cans. The lighting gets a bit darker from the last shot so those smaller 2 got hidden in the shadows of all that mess...
@@bigusdickus3068nah you’re wrong. The last shot only has 2. The left might still look like 4 bc of the other shit behind it, but there’s definitely just one pipe each side, only the very last shot when you hear the last rev
Mf built a damn French horn up under there 😂😂😂
😂😂😂😂😂 Barump Barump Barump Barump
Underrated comment !!! you win!!!!
That comment elicited a legitimate laugh out loud.
That's gorgeous wow and the car as always Toyota you never fail to Impress
😊😊😊
Customer: I wanna fuck up my tires looking like a badass
Welder: say no more jackass
😆😆😆
"Your scientists were so preoccupied with whether or not they could, they didn't stop to think if they should"
no way that thing flows good at all 😂
remote mount turbo, or did you not know thats what ur seeing here☆joedog☆
There's no rear mounted turbo moron, it's just a fancy shaped exhaust
@@joeyallcock1011 it’s not a remote mount turbo though open your eyes
Oh yeah you can see the turbo and the intake piping
We're is the turbo at??? Take a screenshot an circle it cause I don't see no remote mount turbo.. Unless it's a Bluetooth turbo setup I don't see one..🤣😂🤣😂☠️☠️☠️
This is a lesson in adding more restrictions to your exhaust.
😉😉😉😉
Who needs a back bumper when you got that
😊😊😊
Its wider than the car 😂 wtf mann
😅😅✌️
what the hell is that
hellish construction 😆😁
The owner wanted to restrict his horsepower.
WELDER SHOWING OFF
Beautiful work- yet nonsensical
😭😭😭
Verdadeira Obra de Arte !👏🏼👏🏼👏🏼👏🏼
Diffuser ❌
Exhaust ✅
😊😊😊
Having a tuba as an exhaust is wild 😂
He plays the Exhaustophone in band.
I'd buy that for a dollar!
all this for a slow 4 banger is crazy work
😉😉😉😉
Tbh. Seeing the exhaust pushed to the wheel. I wanna see this car do some wild burnouts.
😯😯😯
Bro got whole squirrel maze under his car.
Somebody had fun welding this that’s the craziest looking exhaust system I’ve ever seen
"Your scientists were so preoccupied with whether or not they could that they didn't stop to think if they should."
🤔🤔🤔
This aint your average neighborhood kids 86
😊😊😊
When your exhaust costs more than your entire car.
This elaborate exhaust looks something you can see out of the brass section.
Bro's got the German engineered exhaust.
😯😯😯😊😊
Looks like beast exhaust 😮😮😮
😉😉😉
this looks insane, got hyped up for the sound and then got let down harder then a trust fall by myself
That looks shite
Total mente de acuerdo con usted pura chapuza jejeje
True. It's just ugly
Circuit of Exhausts 🔥🔥
Good straight piped.
😊😊😊
Man that looks horrible!
actualy does, ppl waste money and stainless steel or titanium like crazy....... wtf
So is this like a riddle? Find where the exhaust goes
😆😆😆😆
Seriously no more coffee for the welder
@@lowrider5502why? his job lookin nice remote mount turbo f.y.i☆joedog☆
@@joeyallcock1011where do you see a turbo?
I don't get it either. Clearly he had enough pipe to do a rear mount turbo.
Looks 10/10 sound lawnmower/10
😯😯😯😯
Pura obra de arte metálico,excelente trabajo realizado bravo 👏👏👏🙌🙌🙌😊👍♥️
😊😊😊
“You ain't gotta get ready if you stay ready”
- The tires, perpetually warmed on a drag strip
Exhuast leaks gonna be bros worst nightmare
😯😯😯
Lmao that welder could weld a 8 headed monster😂
😊😊😊😊👌🏻
This is when welder charges by the foot and goes extra mile!
Somebody had a PHD in welding, and it looks flawless.
I just want to hear a COLD START😮
Congrats, you made it a VQ 🎉
Dude just invented the next iteration of California's emissions control equipment
Bahahaha yes! 😂🤣but al too true 😪😪
but why
Welding advert 😂
42!
Honestly I'd expect its for a unique sound but does look a little over kill, almost looks like it has fresh air intake/collectors at the side too, interesting tbh their could actually be some science going on....
Owner has small pipe. Needs long one on his car.
Because we can, and if we can..we do
Ricer shit
A piece of art
😉😉😉👊👍
More pie cuts and welding time than if i ever sat down and tried to weld the Eiffel tower bro, wtf is this😂
👌🏻😆😆
"I swear its stock officer"
Sooo underrated 😂
Owner: I want to be out of my driveway before the smoke from my exhaust comes out...
Fabricator: got it
That is one beautiful titanium exhaust somebody spend some hours on that I give the person props to build a not exhaust Annie built a jack-up point that is a beautiful exhaust
😉😉😉😉👍👌🏻
That is a crazy amount of pipping, but that sound though…. 🤤
😉😉😉
Yujiro hanma: demon back
Baki hanma: demon brain
Toyota: demon exhaust💀
It sounds amazing but how much does that exhaust weigh? Lol
😉😉😉😉
Less than your girlfriend for sure
Less than it's price
It's to help weigh the rear down... Because the airplane wing at the back doesn't produce enough downforce 😮
Puts the "car" in car-o-lina squat.
Seems really efficient
Ya, but come on, you have to admit. It sounds amazing for what it is.
Nice lawn mower
better get some magic happening under the hood for that exhaust to be worth it 😂😂
You can't do anything under the hood to make that system worth it.
That’s the next F1 tyre warm up. Trust the process guys 😂😂😂
😊😊😊😊
I thought i was trippin thinking wtf, have i missed something in tuning, never seen such a crazy exhaust. I feel fine now ive read the comments, its definitely not me lol
😊😊😊😊
“I tell you I got 100 more hp”
👍😁😉😉
The digital display fried a pixel. It showed a permanent 1. It was supposed to show 00 HP increase.
Maybe a back pressure increase 😂
🤣😂😭
抜けが悪くてパワーダウンするね。
😊😊😊😊
この見た目ありきのデザインですね。
無駄な重量と排気経路の長さで、性能は良くはならないですよね。
まぁ、欲しい人は居るんでしょうけど…
音はいいのでヨシッ!
The funny part is, aside from this video or in a mechanic shop, the only way anyone will see those pipes is if this car does a barrel roll
the fumes are going to enjoy this roller coaster
😊😊😊
biblically accurate exhaust
😉😉😉