Treating Wood with Linseed Oil & Pine Tar (Talks w/ an expert)

Sdílet
Vložit
  • čas přidán 23. 07. 2024
  • If you want to deepen your knowledge about natural wood treatments like Linseed Oil and Pine Tar, this is the video for you. Natalie Yon-Eriksson, owner of @Earthandflaxstudio shares a lifetime of practical knowledge about natural methods for treating wood, particularly exterior carpentry.
    This is a long video - treat it like continued education. We entered with very little experience with linseed oil. We really didn't know what pine tar was. We learned more about exterior carpentry filming this video than we could have imagined.
    We broke everything up into chapters for you to reference as needed. There's also a couple links to Natalies website and store. If you have any questions about linseed oil or pine tar, drop us some questions in the comments.
    Natalie-s Website: www.earthandflax.com/
    Light Pine Tar Vs. Dark: www.earthandflax.com/post/lig...
    ------------
    A Note From Philly Green Building:
    Thanks for checking us out. Our company is Subversive Building, DBA Philly Green Building on CZcams, Instagram, and other social media. We’re a sustainability obsessed GC in Philadelphia trying to share our knowledge for your home improvement or renovation project. We explore low carbon building methods and practices to build a sustainable home. Our goal is to achieve passivhaus standards, but we often gravitate towards practical, achievable results!
    Make sure to subscribe to stay up to date on this project and many more! We talk about more involved upgrades like this, as well as diy projects and home improvement.
    ------------
    Interview w/Natalie: • The Benefits of Natura...
    ------------
    Share This Video: • Treating Wood with Lin...
    -------------
    Playlists: here's some other videos we think you might like!
    • Tutorials
    ------------
    Do you have questions about this video? Join the conversation by dropping a message in the comment section below!
    ------------
    Subscribe to our channel to stay up to date on our work, research, review, and mistakes. Help us fight the good fight!
    00:00 Introduction
    01:05 About the Materials
    03:58 About the Project
    05:08 Prepping the Project
    08:23 Linseed Oil vs. Poly
    09:43 Application Notes
    10:25 Applying ONLY Linseed Oil
    12:12 About the Blend
    15:50 Blending Pine Tar & Linseed Oil
    18:40 Wood Inspection, Repair, and Prep
    22:03 Applying the Blend
    26:18 Outro & Bloopers
  • Jak na to + styl

Komentáře • 14

  • @dynamiscr
    @dynamiscr Před 5 měsíci +3

    Great content! I’d like to give this combination a try. Thanks for sharing. Just an fyi: Natalie’s company site is impossible to browse on mobile devices

    • @GreenBuildingNetwork
      @GreenBuildingNetwork  Před 3 měsíci

      Appreciate the kind words. We’ll let her know next time we see her!

  • @cam-asherbond5316
    @cam-asherbond5316 Před 4 měsíci +2

    Man I really wanted to support Earth & Flax. But $400 shipping to Montana for a few gallons is INSANE.

    • @GreenBuildingNetwork
      @GreenBuildingNetwork  Před 3 měsíci

      Yea, that is a bummer. We’re spoiled by having them so close. I’d imagine there’s other vendors closer to you!

    • @dnevnoydozor2923
      @dnevnoydozor2923 Před 3 měsíci

      Buy any natural pine tar, linseed oil and turpentine. Mix 1/3 ratio. Paint on any wood on sunny and warm days. Easy peasy.

  • @susanzientek9654
    @susanzientek9654 Před 3 měsíci +1

    is the heating of the pine tar/oil mix necessary? I see it in the application instructions but you didn't do that.. I'm planning to pine tar/oil our cedar siding for a new build but it I don't need to heat it up, that will make less prepping.. thanks for any info you can provide.

    • @GreenBuildingNetwork
      @GreenBuildingNetwork  Před 3 měsíci

      Not actually sure. The Earth + Flax website has a ton of tutorials! Let us know what you find?

  • @RyanJenningsHenderson
    @RyanJenningsHenderson Před 2 měsíci

    How many coats of of this combination product should you use? just 1? should you let the first dry and then go over again?

    • @GreenBuildingNetwork
      @GreenBuildingNetwork  Před měsícem

      sorry for the delay. we did two initially, I think we probably should have done 4. the wood was thirsty and we're going to have to reapply more coats this season

  • @Trumpetfiend
    @Trumpetfiend Před 3 měsíci

    Does it have to be Raw Linseed Oil or can I use Boiled Linseed oil?

    • @GreenBuildingNetwork
      @GreenBuildingNetwork  Před 3 měsíci

      Check out this link. Quick summary, raw is the most natural. Boiled has a bunch of additives!
      vermontwoodsstudios.com/blogs/recent-articles/raw-vs-boiled-vs-polymerized-linseed-oil#:~:text=The%20difference%20between%20raw%20linseed,option%20for%20finishing%20wood%20furniture.

  • @JAYHARRIS85
    @JAYHARRIS85 Před 5 měsíci +1

    I really really enjoy them good folks who talk and talk and talk,,, lol... I think about an old school carpenter and how long it would have taken to talk about protecting wood, lol... OMG. It's,,, revenge of the nerds