@MBPATENTS I have a keeway vieste 125cc and I wish to increase a bit the top speed roller weights are about 15g, what is your opinion to change for please 🙏
@@chrisabela7306 very soon I will upload about the centrifugal spring if you cut it a little it is like having heavier rollers to achieve heavier balls you want city time with the spring is easier
Hi Acegik don't write such comments, it's a shame for others to hear them, if you don't know, don't write at all the PCX is close to 1 million kilometers and nothing has happened to me why you mention it the Bearing has nothing to do with it🤔
So, what you are trying to achieve is to make a curved and smooth surface, so that the rollers can go as high as possible in the variator ? And the tool you used is a dremel ?
@@MBPATENTS So I have seen your videos and many more from other people who tried to increase the performance of their scooters and I found out that the most efficient way is to either do what you did or cut the spot,where the bushing is, a bit more flat (only by some millimetres), in order for the variator and the half pulley come closer and push even more the belt to go higher. I hope you understood what I mean (I'm Greek but I write in English for others to understand).
Hi Purple 89 I have tried the triangular balls up to 125 with 1000 forces. Here I made the path of the balls bigger to push the narcissus inside and the outer plate what I rubbed until about 4/10 about
@@MBPATENTS if I do this to my Honda Dylan 150cc how fast would I go ? Am at 110 fast slow to 120 now I like to go to About 130 140 160 would be perfect tho
+Purple 89 If it is the same variator with the pcx, you do it in the same way, comfortably and easily, now I am 140 after 135 km, it shakes a lot, when I make the grips then I will upload one last video at 160 + !!!
1 because the factory variator has better metal 2 can also go up to 142 km since I can do it better instead of getting another variator and I like the patents too!
@@MBPATENTS gabe newel I USED MIXED 10G AND 17G ROLLERS JUST NOW AND NOTHING AFTER UPGRADE OF THE VARIATOR WHICH I TOOK OFF A BIT OF METAL WITH A DRILL SET NOW IT CAN GO TO 80KM/H . FUK SHIT ADVICES YE ALL GIVE
I have a Honda PCX. Variators sizes differ you know. This works on PCX 150 cc. If you have something else and tried it and your variator is another size of course it may not work.
I can surely say you really know what you are doing keep up the good work 👏
Hi Chris thank you very much!!
@MBPATENTS I have a keeway vieste 125cc and I wish to increase a bit the top speed roller weights are about 15g, what is your opinion to change for please 🙏
@@chrisabela7306 very soon I will upload about the centrifugal spring if you cut it a little it is like having heavier rollers to achieve heavier balls you want city time with the spring is easier
@@chrisabela7306 the dimensions of your rollers?
@@MBPATENTS looking forward to seeing it
Hi,
Great video. Is this the stock vario or a aftermarket one? And are you using the stock rollers or a different weigth and size?
Hi Jos Krakaka thanks The balls are factory 16g
Can you put a less wide belt to increase the speed too ? Too maximize what you are doing here ? Like 3 mm Les wide or so ?
Thats the hack mod. Thst u cn do .. he removing the factory restriction limit the roller to go all the way on top 👍
Güzel çalışma kanka
Yaptığı iyide sondaki ibre saçma ivmelenmiş.Degilnpcx Kawasaki h2 olsa öyle kalkamaz.almis orta sehpaya bas gaza
Wont this need balancing after? At high rpms this would shake the driveshaft a lot and would destroy the bearing
Hi Acegik don't write such comments, it's a shame for others to hear them, if you don't know, don't write at all the PCX is close to 1 million kilometers and nothing has happened to me why you mention it the Bearing has nothing to do with it🤔
Αδερφε το τροχιζεις συγκεκριμένα χιλιοστά η όχι;
Top speed while driving?
So, what you are trying to achieve is to make a curved and smooth surface, so that the rollers can go as high as possible in the variator ? And the tool you used is a dremel ?
Yes that's it
czcams.com/video/H1o8aWGsuzE/video.html
@@MBPATENTS So I have seen your videos and many more from other people who tried to increase the performance of their scooters and I found out that the most efficient way is to either do what you did or cut the spot,where the bushing is, a bit more flat (only by some millimetres), in order for the variator and the half pulley come closer and push even more the belt to go higher. I hope you understood what I mean (I'm Greek but I write in English for others to understand).
Hi, it is unbeliveable. :) I have pcx 125, does it works on it? The lifetime is the same?
Thank you very much! Yes it works on pcx 125! What do you mean by "lifetime"?
@@MBPATENTS I mean that the variator will broken after same time. Where do you live? Could you make it me somehow?
If you do it right it won't break! I will make a video with a pcx 125 and I will upload it soon! I live in Greece
Hey what kind of dremel tip are you using right here if u can remember . I’m doing this tomorrow so let me know
Will it work for indian Spec NTORQ 125
If it has the same Panadol as PCX it will definitely work
I have a Honda Pcx 125 2012 stand speed of 135km/h Malossi Multivar 2000 10.5 gr .I don't have any modifications to the variator
Scusami anche nel malaguti 250 si può fare questo lavoretto
Yes 😉!!!
You could never get this accurate doing it like that it would need machining properly , that would vibrate like hell and probably sod the bearing up .
It's been modified 4 years now and it's still awesome!
Müsic name ?
I dont remember but its a copyright free song from youtube's library ncs
Αδερφε εχω pcx 150 2014,γινεται σε αυτο το μοντελο και αν ναι και μενεις και κοντα Θεσσαλονίκη πρεπει να μου το κανεις
Ναι δεν έχει να κάνει ι χρονολογία ι μεταδοση ειναι ίδια σε ολα και σε 125cc μενω Αθήνα
Dokter pully rolls would do the same thing
Hi Purple 89 I have tried the triangular balls up to 125 with 1000 forces. Here I made the path of the balls bigger to push the narcissus inside and the outer plate what I rubbed until about 4/10 about
@@MBPATENTS if I do this to my Honda Dylan 150cc how fast would I go ? Am at 110 fast slow to 120 now I like to go to About 130 140 160 would be perfect tho
+Purple 89 If it is the same variator with the pcx, you do it in the same way, comfortably and easily, now I am 140 after 135 km, it shakes a lot, when I make the grips then I will upload one last video at 160 + !!!
+Purple 89 m.czcams.com/video/kfwsKiaQUfw/video.html
@@MBPATENTS before you did it who fast did it go ? 90 km or so ?
🎉🎉🎉9,12
Thank you very much!!!
Why not just replace the variator? lol
1 because the factory variator has better metal 2 can also go up to 142 km since I can do it better instead of getting another variator and I like the patents too!
Variador j costa lo malo que es bien caro 😂jajaja
Yes yes 😂
DOES IT REALLY WORKS ???
Yes it works!
@@MBPATENTS Precision Cutdown WOW BITCHZ THAT IS WELL OVER 100KM/H DAMN BITCHZ IS THERE ANY OTHER WAYS OF INCREASING SPEED ???
Yes there is but this is the best!
@@MBPATENTS gabe newel I USED MIXED 10G AND 17G ROLLERS JUST NOW AND NOTHING AFTER UPGRADE OF THE VARIATOR WHICH I TOOK OFF A BIT OF METAL WITH A DRILL SET NOW IT CAN GO TO 80KM/H . FUK SHIT ADVICES YE ALL GIVE
I have a Honda PCX. Variators sizes differ you know. This works on PCX 150 cc. If you have something else and tried it and your variator is another size of course it may not work.
Lo scuter va bene ma alla prova mi da sempre 100 klm orari