【模型透明件完美打磨】最速方案最少工具分享 | Clear parts handling | LEAST STEP FASTEST SHARING
Vložit
- čas přidán 10. 09. 2024
- Sharing of how to handle clear parts, this is not the FINEST handling process but definitely the least step necessary to remove all nubmarks
Try to imagine, HG got around 100 nubmarks, and MG got several hundred, you may consider a faster method instead of a finest method.
透明件的處理分享, 效果一定不是最好不過至少是用到最少的步驟去處理水口位到完全不可見的地步. 一件高達有數十到數百個水口位須要處理, 可能大家也會想要個最速的方案
--------------------------------------------------------------------------------------
FB: / studiofohk
IG: / studio_fo_hk
youtube channel: / yoken125
--------------------------------------------------------------------------------------
#模型製作 #模型頻道 #模型介紹 #高達模型 #gunpla #廣東話 #模型改造
▬▬▬▬▬▬ More basic skill for handling gunpla | 更多基礎模型處理分享 ▬▬▬▬▬▬▬▬▬▬
👉 • 高達超入門級分享 | gunpla begi...
▬▬▬▬▬▬ More customizing skill | 更多模型改裝分享 ▬▬▬▬▬▬▬▬▬▬
👉 • 高達改件簡易分享 | gunpla cust...
▬▬▬▬▬▬ Customized kit sharing | 改裝成品(半成品)分享 ▬▬▬▬▬▬▬▬▬▬
👉 • 高達成品改件系列 | finished gu...
#clearpartpolishing #fastestclearparthandling #fastestnubmarkremove #gunpla #gunplapolishing #upgradedetails #DIYpolishing #DIYclearpolishing #gundam #polishingcompound #polishingcompoundtutorial #tutorialforpolishingclearparts #beginner #透明件打磨教學 #最快透明件打磨 #最速透明件打磨 #透明件水口位處理 #透明件新手處理 #打磨膏教學 #高達打磨膏 #細節提升 #CP值高打磨方案
~-~~-~~~-~~-~
Please watch: "挑機MGEX! 搖控+LED+呼吸燈 | 成本HKD30內 | Challenge MGEX! LED + breathing light + remote | Cost below HKD30!!"
• 【高達加燈】挑機MGEX! 搖控+LED+呼...
~-~~-~~~-~~-~
Thank you!!! Good tip to use the back of the 3M sponge! I didn't know you could do that.
This is the first time I saw the Tamiya compounds, other videos show the Madworks ones (which I bought last week) I hope they are just as good.
Very good to show the comparison with sanding and no sanding, thanks!!
glad that give you some ideas!!
反覆學習幾次後決定把眼睛拿掉開無視🤣
😘👍👍👍適當時間係要用無視大法!!玩模型最緊要輕鬆同自己feel good!!
用水晶甲挫磨既效果都好不錯
yes, 要平要快呢個都係一個好的solution
省时省力的话,推荐用变频指甲打磨机,平面钻头上用双面胶贴上海绵砂纸或者抛光头,然后用低速来打磨抛光。实测有效!
是的, 我之前都有出了一條片是用納米指甲銼的
czcams.com/video/x5SwLt_97Qc/video.html
肥宅 多謝你出呢條片
如果以1-2隻RG 為目標係咪各1枝研磨膏就夠?
另外我見god hand 有出2000 4000 6000 10000 磨砂海棉
能否作為細目粗目研磨膏代替品?
其實1支如果你用我講的流程每個外甲件都用.... 應該1隻RG就玩完.
打磨綿, 打磨棒, 同打磨膏出黎的效果真係會唔一樣的, 因為打磨膏無一個實物支撐, 所以效果係可以拋到光, 但打磨棒同綿上到3000/4000號都仲係會磨花個表面... 10000我就真係無用過俾唔到comment, 但打磨膏啦, 你至少真係會用到, 10000號打磨條應該係D人上完光油再磨平水貼突出果D位... 你未必真係用得著.
請問,我搵唔到3M打磨綿,用其他牌子的打磨海綿,用背面係咪都可有你段片所講,好幼細的效果?thanks.
其實我見3M打磨綿模型店, 文具店, 五金店好多都有, 未必真係咁難揾? 你講的其他牌子, sorry 我真係唔太知.
你真犀利, THANK YOU!!
I really like how you take a more practical approach to building. I personally don't have the time nor patience to go from 400 to 3k grit. Keep making videos plz!
Ha-ha... that's true... I really can't stand using more than 10min for removing 1 nubmark. Because I have a MG nu gundam that I wanna start...
肥宅哥,不能用刀尖去剪透明件啦
请珍惜你的神之手
呵呵收到,不過神剪已經榮休左
請問巿面上有不同牌子拋光膏,它們有沒有大分別?
其實我自己就真係唔覺好大分別...
估你唔到係3M海綿砂紙背面..haha! thks for sharing!
呢個係我老師教的秘技😁
想請問下透明件做無縫係咪都係一樣咁照做咋
因為佢係透明,所以其實係無得做,個縫都會係睇到
簡單而又直接,耗不耗時間的問題,交回事主來衡量🤨
是的, 堅持做到最好的也是大有人在, 我自己也只是給多一個參考就是做了這些結果就是這樣. 模型就是自己想怎做就怎做. 自己開心是最緊要. 現在是人玩gunpla嘛, 不是gunpla玩人😆
非透明件,如唔上色素組,使唔使用打磨膏?
絕對可以, 而且個效果出黎係幾好嫁! 素組只用粗目都已經夠靚仔
@@studioFO 如果之後會噴光油嘅話 又有冇分別呢?
@@rockywu8109 會光滑左,咁就要睇你鐘意咩野effect
@@studioFO 咁OK喎 我想試下少少部件位置係特別比起光油出黎嘅效果再光滑d thank you呀