The Charlie Show /// Episode 281 /// Fusion Pro install, setup and tuning
Vložit
- čas přidán 19. 09. 2022
- The TRX 4 gets an update with a fresh Fusion Pro 2300 KV FOC 2-1 motor combo. From install, to calibration and all the settings, this video covers almost everything you need to know about the Fusion Pro and getting it setup and installed.
Here are some extra videos you may also find helpful.
Fusion Pro Unboxing and Sensor Reset.
• The Charlie Show /// E...
Trouble Shooting - Servo Test your Throttle
• The Charlie Show /// E...
The Fusion Pro:
www.hobbywingdirect.com/colle...
HOBBYWING Official CZcams
+++++ Cars & Trucks +++++
Xerun series (Professional grade)
Ezrun series (RTR / MAX upgrade)
QuicRun (starters)
+++++ Helicopters & Airplanes +++++
Platinum Series
Flyfun Series
Skywalker Series
+++++ DRONE +++++
XRotor Pro Series (Pro.Filming /industrial, Gov. research)
XRotor FPV "M" Series (FPV Racing)
XRotor Series
+++++ Marine +++++
SEAKING Pro Series (Speed racing)
SEAKING Series (Marine)
Our mission: Help create memorable moments worldwide.
HOBBYWING Factory: www.Hobbywing.com
HOBBYWING North America: www.HobbywingDirect.com
Hobbywing
Hobbywing_
Copyright & Trademark
HOBBYWING is a registered trademark of Hobbywing technology.
#HOBBYWING #NerdTheNewCool #HDUB - Jak na to + styl
Just wanted to say thanks! This video helped me set up my SE.
Thank you so much, buddy! After watching your video, I realized I was simply plugging in the cable wrong - and I had the transmitter on which may have also been causing a problem. You saved my ass!
Great! Happy Trails!
HobbyWing should make a mini Fusion motor for SCX24, TRX4M.
Just wanted to say thank you for the information on where to plug the power and servo. Setting up a new remote and my throttle was steering and my steering was throttling 😂 appreciate you brother!
OMG ... OCD kicks in ... has that vehicle ever even SEEN some a brush? I started to quiver when you put the mount back on that nice clean motor ... DIRTY! ugh ugh cough cough ... ROFL.
It’s gonna get dirty anyway. Pointless to keep it spotless.
will be coming back to this vid many times in future!
Thanks for the help! Setup was super easy. Always a good reminder about switching the motor direction the proper way, I have a feeling alot of people just flip the remote switch 😬
Best explanation of the settings out of the 5 videos I've watched, thank you so much.
My friend, I thought I wrecked my new fusion pro 2300kv. I was super stressed out being that trying to return electronics is almost impossible. After watching this vid, is was only because I messed up the throttle calibration. THANK YOU SO MUCH!!!!!! Subscribed!!
So helpful overall on Hobbywing Programming. Thanks! Would've loved to see the tires spin at full throttle. Or an action shot outside!
couldn't be happier to have burned up my stock motor, can't wait to put this setup in my Defender
Thank you!
Thanks again Charlie! It's me!!
Thank you
Nice
Which way does the shaft rotate by default?
Do you have a link for the Hobbywing Podcast?
I didn't see it in the Drop-down.
Charlie, I recently got this motor. Wow, the modulation and slow crawl ability is insanely good! I have the Bluetooth programmer and it doesn't seem to have all the options listed on the sticker you show here? Anyway, perhaps you will have a firmware update for this? I love the motor so far, it is even better than my Axe R2 550 which I previously thought was amazing (still is very good).
My trx4 has a different battery plug. Did i buy the wrong motor ? Or have to cut and splice on the other style plug ?
What pinion gear are you using? it looks pretty big like a 16t or something? Thanks for the killer video!
How do i do this with the scx10.3 firma? Im trying to put it in the CJ7 but the firma 2 n 1 isnt the same. Do i splice the wires? There was no wiring instructions with the motor..
Do you need the programmer in order to bind it to a reciever? Only reason asking im trying to bind to a spektrum reciever for an Axial SCX10.3.
So would I need a new transmitter if I use this set up
Great video. Any issues with swapping out the XT60 connector for the Traxxas battery connector?
Done correctly, should be okay.
Once you upgrade to a Fusion Pro and you lose accessory port from the XL-5, how do you power accessories?
It comes with a bec inside?
Do I need the Traxxas BEC with the fusion pro? I did upgrade the servo to a AGFRC 40KG Waterproof Servo. I also have the Traxxas light kit, but not the pro scale one
Issues calibrating throttle. Help please
I wonder if you calibrated in reverse order if it will fix the motor rotation problem I’m just wondering
Not really, creates basically the same problem.
Can you use the multifunction lcd program card for this? Or do you need the LED one for it like in the video?
LED card is the only one that works with the Quicrun series. Quicrun Series will "not" work with the LCD or OTA devices, only the LED.
The damn thing won't save calibration.... can drive about 15seconds, then won't run until power cycled. 15sec again...
Reset the TQi radio but still won't save calibration...(throttle and brake 100%, sensitivity 0%. works fine with a servo)
Any suggestions?
I set my fusion pro up same way on my trx4 sport and only get about 15min of run time before it goes into low voltage cut off. I've rechecked all my settings and checked my batteries and it all checks out. Not sure what the problem is 🤷🏼♂️
Are you using any adaptor or have changed the plug? What type of battery packs are you using?
Please feel free to email us for support directly - NorthAmerica@hobbywing.com
Could be a basic "connection problem" from a plug, or adaptor. Could be a NIMH battery triggering the Lipo Mode. If you're using NIMH you should disable the lipo setting.
Do you know how to fix the little stutters when crawling slow sometimes?
After giving more throttle for a Sek. And going slow again after, the Motor works fine....
Automatic motor Pairing process clears up any strange quirks like that 99% of the time. Otherwise, please send us an email. NorthAmerica@hobbywing.com
@@HOBBYWINGOfficial well oke, ill try it later and let you know of it worked. Thy
@@HOBBYWINGOfficial i still got the Problem...
@@herzbruch5860 Hopefully you've emailed us by now, if not please do. NorthAmerica@hobbywing.com
My new lcd card has a blue sticker and my numbers explanation is different than your too?
What adapters should I get to work with a traxxas 3s battery?
We would recommend never, ever, using adaptors. Best to simply replace the plug as needed. Adaptors tend to lead to problems.
Just installed this fusion pro 2300kv in my trx4 sport did the calibration and mine is already running forward when pulling the trigger backwards like it should be before changing the motor rotation with the program card But my problem is when adjusting the max reverse force its adjusting the forward like its soppose to be reverse so how do i switch this around but keep my forwards motion by pulling the trigger
Please send us an email. Sounds like something is being overlooked. NorthAmerica@Hobbywing.com
Would be worth doing some simple removal and bench testing to make sure. Either it got calibrated backwards, or there's something else going on that's being missed. Email us and we can assist more directly.
What if you have a bunch of Traxxas ID batteries? How do you connect it?
You can replace the Plug on the Fusion if needed. It's fairly common practice to remove a plug and solder on the correct plug for your battery packs. Hobby shops can assist, or there are lots of helpful how to solder videos on CZcams.
I just installed the the 2n1 and no longer have the external ESC how do I get my lights working since I do not have the external ESC?
Most light setups simply need BEC power. You can plug most light kits into an open channel on the receiver, but you should check with the manufacture of the light kit to be sure.
@@HOBBYWINGOfficial I tried the receiver but there wasn’t enough power to run them.
@@HOBBYWINGOfficial thank you for responding and all your help!! I LOVE THE FUSION!!
My receiver isn’t getting any power
Clean your rig!
HobbyWing should make a mini Fusion motor for SCX24, TRX4M.
That sounds horrifying, I'm in