Announcing GRIDFINITY 2.0! Print it now, FOR FREE!
Vložit
- čas přidán 31. 03. 2023
- Now with 50% more sides!
Download the Gridfinity 2.0 Beta Tiles: than.gs/m/818409?...
Download the Gridfinity 2.0 Beta Baseplate: than.gs/m/818411?...
Everything in this video is printed in Inland PLA+. Get some at any Micro Center or right here: amzn.to/3lXwEXd
Support the channel and these projects! / zackfreedman
Join our maker community: / discord
You'll need glue: amzn.to/3U9ODWX
And 10mm balls: amzn.to/3K3zYrR
Fusion 360 source: a360.co/3K4zNMN
Hot damn, this is one handsome Gridfinity baseplate: www.etsy.com/listing/13919074...
Credits:
Interference SFX from Partners in Rhyme
Honk SFX from www.zapsplat.com
That spiffy hype song is Exx F--k by Suhov
Prusa Research Prusa i3 Mk4 footage from Josef "Josef Prusa" Prusa of Prusa Research
Download the super-secret forbidden tile: than.gs/m/818412?... - Věda a technologie
Now, I need to see people making gridfinity storage for the hexagonal racks, and ball tracks for gridfinity racks. Make his joke a self fulfilling prophecy.
And adapter plates
@@brycesnell6071 well yes, that goes without saying, how else will we store our board game other than with gridfinity?
@@curvingfyre6810 no, the other way around. Having the hex baseplate layung around is unused space, and by that not efficient. We NEED to put gridfinity on it to store gridfinite amounts of stuff on the unused plate
But what about hextraction gridfinity pieces?
@@SWnAZ if your ball rolls off to the side its organized and never found again
This man developed an entire board game for April Fool's... I love the dedication to the bit.
There was also FL Studio who built an arcade cab version and posted the trailer on April 1st.
@@MrSonny6155 yh but image line have like 50+ employees, he's just 1 man
aren't they just Gravitrax tiles ?
Took me a while
@@MassisPipes My little brother got those for christmas, yeah it's the same
As an elementary STEM teacher with a couple 3D printers, this is a game changer. Could even have the students design their own tiles!
he just made Gravitrax duh? :D
A game changer 😏
Those flip flop tiles could be turned into binary counters too
@@AMTunLimited Oh man.... physical analog gravity powered circuits?? That could be legit useful for teaching binary logic
"And me, Sam Reich. I've been here the whole time!"
Awesome work I did not realize how huge the community had become I will be checking this out for sure. Thank you so much for sharing this with the community, truly an amazing project.
I was so confused for the first half of this video wondering why you hadn't shown a single bit of organization with your organization system yet. Fantastic.
Yeah, and the obvious tracks had me wondering if they would let parts move around, but then, how would that help organizations?
Why do I see you everywhere
@@fauscsk_9099 I'm freaking magic. Or we have good taste.
it took me until he said he was ditching the magnets
I thought the notch was a choice, wouldn't more orientation be better? but what ever
the magnets though made me check the description as I hear him say he's ditching open source lol
Hexagons are indeed the bestagons.
Yes, the hexagons are the structure that most cover the majority of surfaces, the 6 it's a great number
W Cgp grey moment
@@Box_God 💯 best phrase that came from the internet
That's literally exactly what I said as well
Yes yes yes
What i love about this, is that this could have been released on any other day of the year and i would simply take it as a fact, Zack is the quirky and funny guy after all
One year later and it still got me
I can’t believe he was able to slip the hitchhikers guide to the galaxy into the video THAT smoothly 🤣 awesome book, great taste Zack!
The MEANING OF THE UNIVERSE
Seriously panicked about the fragmentation this would cause. Well played.
I literally just started printing gridfinity a week ago, so... same here.
Dammit it ive been bamboozled!
Played hehe. Like a game? Get it? Cause it's a-
Took my until 7 mins in
I mean it's not that hard to print an adapter from square to bestagon, so I wouldn't be too concerned about that at all. Or just dick around with boolean mesh modifiers a bit and you can convert pretty much anything you want if needed.
Hexagons truly are the bestagons! Excited to see where this upgrade goes in the future!
It's like playing civilization in 3D printer
Pentagons begone!
VIHART reference
He kinda had me until this line hahah
@@rexjaguarius CGP Grey, hm.
I was pretty hyped for hexagon based gridfinity. If I didn't have a dozen other projects I've not been paying attention too, I'd design parts for it
I can't wait for the gridfinity 2.0 pro league. Like imagine 100T vs Fnatic hextraction grand finals with jerseys and everything. It only makes sense for the next big competitive multiplayer game
This is sick I was just about to go hardcore into gridfinity but 2.0 this is a treat
Lol
April fools tho...
Such an amazing upgrade! Time to re-print all of my original gridfinity parts!
Wooooooooo!
Didn’t even watch the video.
@@yesterdaysproblem look at the upload date
@@jasperbarnett6819 april first, what's your point?
you can't reuse the same thing someone is calling you out for, haha
@@robblly8112 it's called sarcasm dude
The fact that you allowed people to sell something you designed? While I have no intention to do that (I have a solid 9-5), that is just pure kindness that most content creators don't do. Good on you. That earned you a new subscriber - which doesn't mean much for a massive channel like yours.
To greedfinity and beyond!
The dialog is always spot on, thank you for the smirks, smiles and laughs you provide through your carefully crafted words
Make sure you use the new Prusa hex filament to print this.
The community is very festive this year, I appreciate it
Zach, You were the only Fools Day prank/awesomeness that got me this year! Primarily seeing that I am now 4 weeks of printing into my Gridfinity adventure with 1.0...
I am so relieved and excited to start printing this as well!
Thank you for all that you do!
Had a mini heart attack, started printing a scary amount of gridfinity boxes this week, thought I had lost them all.
Same happened to me ...
You and Void Star Lab are pretty awesome. that would fit right onto my cluttered desk
Embigened! lol the noble spirit
I know this was a joke video but holy hell it's still super well done. Great job Zack, and great to see you settling into your new place/studio!
This was thoroughly entertaining… I will be printing all of this. Thank u for keeping parts free and open source for beta!
I used to make plaques with the names of my best customers. Of which I would mount on workbenches and special pieces of equipment in which their business helped me purchase. Cool idea to see it in your lab. It was always only a half-dozen or so....but folks who were fundamental in bringing me so much work that it helped me build my entire young adult life and two workshops back in the day. ( Back in the day was only like 15 years ago but you know what I mean)
finally the Sequel we all were waiting for, also Brooke throwing the pillows was hilarious
... can't wait for the Hextraction Gridfinity accessories
it's almost 5am on a saturday (sunday now, I guess) abd Zack Freedman just released a new video. Life couldn't get any better
Ahh another German with taste 😂
I am so very glad you're back up and making videos. I'm sorry you had a 3-D printed your ark before the flood, but I'm glad that you managed to come out the other in safely, with the two of every kind of filament.
Thank you! I love your tongue-twisting script and your brilliant designs!
Will Hextraction be compatable with Gravitrax because it looks identical to it?
Love it. Thanks Zack!
The only video released yesterday that managed to get a good laugh from me. Well done!
For the man who had to invent a grid just to hold his enormous balls, and then open sourced it in the hopes that one day we might grow our own.
The Open Source part is still April Fools, isn't it?
new here but you’re a riot and i’m here for it. keep it up you cyborg
I love the Prusa shade 😂
Another great video, had me rolling!
This system is truly amazing. Revolutionised how organise my work and definitely improved my quality of life in many areas. Congrats. Amazing achievement in the 3D printing world!
Very entertaining to watch while looking for stuff to print. Cheers mate, earned a subscriber (:
Ugh, you really got me there, watching this "one day later", after having started to print Gridfinity stuff (and even publishing my own blocks) just last week. Hats off, Mr. Freedman.
PS: Hexagons = is that you, Josef Prusa?
you gotta print these new baseplates and modules with the new hexagonal filament from prusa
This is so awesome! 2 days ago I decided to reset my workshop so a complete purge was necessary.
I found Gridfinity yesterday and I'll be implementing that, then this popped up and I was so excited to see hexagons until well I should have looked at the date this was posted haha.
But it did cement the idea of "don't change what isn't broken" and "stick to what you decided on" in my head lol thank you for this haha
Dude! You are Awsome! Love your vids so glad you were able to keep void star labs going! You tickle my funny bone so hard ;)
Got an idea for the game. Magnet tiles. 😈 if they're strong you can make the balls knock each other off too. Might interfere with other parts like the spinning ones but would that be more fun?
It is a good idea, a magnet could hold a ball that passes over it so it can then get knocked off by another ball. Or could curve the balls in unexpected ways.
This is going to be just as big as the original, mark my words. There is nothing more addictive and classic than marbles in tunnels. This is the Mousetrap of the new millennium. I already have ideas for custom tiles and I haven't even seen all the default ones yet. This is maker chocolate. Well done. ^,.'.,^
Indeed, the only thing I worry about a little is the board is so planar and the hexagon are perhaps a little too small to get really creative with. Really needs a second and perhaps third layer just for fun, and the rules probably need to allow for some amount of 'special' tiles that are larger than the standard single hex so we can do more insane stuff with it!
@@foldionepapyrus3441 it's open source, go nuts and do it yourself!
@@josuelservin Very true - however while the initial idea is still a bit more in beta I think it better to hope the standard the Z is creating may be refined further rather with our good ideas in mind than create a fork that may well end up incompatible with the changes we know he is planning.
And as I currently lack a decent printer can't test some of the dafter ideas I've come up with yet anyway - magic smoke got everywhere and I've not got around to restoring it yet.
@@foldionepapyrus3441 What if we made placeholder hexagons you can swap out once the full set is placed? Alternatively you can design sets of them that do the insane thing together but apart are just broken. Doesn't change the rules since the balls will either get stuck or fall off either way. I like the idea of a layered board, then you can have funnels to the lower level.
@@glowpon3 Can also have catapult that hold a marble until the the trigger end is hit etc. I was thinking the best way for layers is just to have the start be liftable 3 or maybe 4 tiles higher than the base as needed. And perhaps with some empty shell tiles that can be played freely above/below the tile you just played as a spacer.
You really made it multiplayer! Outstanding and so creative
PRUSA should send you an XL and MK4 for review. There are so many CZcamsrs that cover 3D printing only. That being said, you are PROJECT oriented. This provides another perspective which is valuable to people who use printers as a manufacturing tool.
1:07 - Congrats Zack! This is one of my new favorite channels... and I don't even have a 3D printer
Respect man. You’re the best 3d printing channel around
This looks and sounds fun! Will print some of them for sure.
Going to be honest, I seriously thought you were serious about all of this until the co-host asked where is the organization aspect of Gridfinity 2.0
Can't wait until people do mazes and contraptions using Hextraction, though! Like, those series of tubes and obstacles they make ball bearings run through? I bet they would look super cool with something like this!
You're one of my favorites on the internet, and I don't even have a 3D printer.
Awesome! Thanks for the nice vid and design.
"Hexagons are bestagons" Did i just hear a CGP Grey quote? Excellent!
This is how to do an april fool video. Fun. Self explanatory ("just a teaser"). By indroducing something new. And by showing off the power of gridfinity through the whole video.
Small suggestion, not a big deal, but a hex grid of 7 tiles across (4 on the on the edge) would have loose synergy with a couple other games. Like Isopath by Pocket 83. Tho your current grid has synergy with Catan. Which is probably a better option. Just thought I would mention it since this is something I've put research into while designing my own games.
You totally got me, I saw this on the 4th and didn't realize it was released on April Fool's. I was getting ready to download the baseplate model to start making a modular colored pencil cup system. I wondered why I had this nagging feeling that you weren't showing any cups...
as a vet stl printer, and an excited fdm noob, i'm excited for this. good work, my dude.
Is Hextraction a nod to Gravitrax?
P.S. Please tell me you are, in fact, changing the Gridfinity license.
You know this is going to compel someone in creating a hexagonal version of Gridfinity now right? Because it actually seems like a neat idea, aside from working around when hexagons are cut in half and odd remainders crop up.
No, it would be a terrible idea for any real-world use. (i.e. storing non-hexagonal things in or on workspaces, containers and drawers that are rectangular).
All of the advantages of hexagons would either be irrelevant for a storage solution, or are negated by having individual containers, and not a connected grid of them.
Hi Zack this project is beautiful, I'm trying to bring it to Italy because at the moment I don't see any videos in Italian that talk about it. Thanks again and I look forward to seeing your ideas announced.
you are amazing! love the new system. kudos and cheers.
Time to play "Is this an April Fool's video?" !
It seems that it is
Taking hextraction seriously - I think I'd vote for larger tiles to allow for more potential creativity with what people can fit into a tile :)
create ultra tiles that take up more slots, but you have to forgo a turn per extra tile space or something to get one
That seems like a nice mix. Ball parcour for kids, easy family game and maybe strategy game. Also we need a version with shot glasses for parties.
You know I'm probably going to end up just calling the game Gridfinity as a result of it being reinforced during most of the video. Helped by the brand recognition.
To further this prank, you should create some actual storage units the fit the hex grid.
I give it 12 hours before someone does this, unless it's already been done.
You are another level of creator and entertainer, best April fools joke out there.
Props for posting this at nearly midnight.
Hexagons are, in fact, the bestagons. Love to see CGP Grey represented
Your humor is the best that starts my day thinking very inventive!
It was most of the way into this before I realised how perfectly fitting the background decoration is
You brighten my day every time
actually looks super fun!
Amazing video as always. Freeballing is the superior name.
Ok. I am 5 minutes into your video and I had to pause, subscribe, and comment. I love your humor and so far love 2.0. Keep crushing it and now I will go back to the rest of the video that I will no doubt enjoy. I look forward to organizing myself now that you stop the 42 BS and figured out the 0 and 5 deal 😂.
Almost missed the date in EDT. Always love the vids.
LOL😂😅! You made my morning. I've never come across your videos. But im glad I did this morning. By the way I'm hitting the subscribe button. Thanks again have a great day. My kids are going to love this marble run!
thank you for actually making this a thing, I love april fools jokes that are also actually kinda cool and get released
Excellent rant! A++ will watch again.
oh my, the 'gravity being nature's magnet' absolutely killed me ! also, I think I first found this channel from the wizardry video which I really loved
This is so freaking nerdy 😂. I love it!! I NEED it!! I’m glad you didn’t name it that same thing. Hextraction is something I would’ve loved as a kid & makes me even crazier about it as an adult!
I came because I'd heard about Gridfinity and it sounded interesting. I'm subbing for the great humor!
It's already 2nd April... Well played anyway sir! I realised it was likely an April fools but found myself thinking "that game actually sounds pretty cool". Now it turns out that part is real? Can't wait to see the full video.
Maybe you should build the game into Gridfinity 1.0? The tag line could be "Organise your bits, then play with 'em" ;)
And here i was sitting here thinking, cool what new things are part of gridfinity 2.0 lol
Great video
I needed a reason to get to it and go pick up the stepper motor I need to fix my printer. THIS IS THE MOMENT.
holy shit amazing as always!!
PS. That HL2 ref right at the ragged end fucking GOT ME!
You had me at "Dank ass doobage"
L'Shanah Tovah! Have a sweet new year, Achi.
LOVE it, Zach! You go, girl XD
Definitely going to give this one a try.
I am going to be able to organize so many things now, thank you
What filament was used for the light blue tiles with tiny flecks in them at 9:10 (right around the "FreeBalling" name announcement)? Inland has some great PLA+ colors but I didn't see anything like that.
Omg this was fun to watch!
Multiples of 5! Thank you!
I love you man !! One day I wish I have the opportunity to meet you and have a beer. You are just awesome and you make me laugh everytime and your content is always very interesting ❤
your fu..king awesome dude love your use of language that you use to language us with your infinite communication
@ZackFreedmann Great to see how that awesome system can still get better! 👍 I can't wait to get my nozzles to temperature to start printing, and getting my messed up workspaces clean. ❤
Which material do you use to print? 🤔
I'm so challenging my coworker the moment this fully drops. She just got a printer for Christmas and I wanna challenge her.
My guy you are such a legend and I appreciate both your humor and genius 😂
The most epic youtube intro still to date
Hahah I love it. Well played Mr. Freedman... well played.
congrats on getting this out by April 1st : )
i just started printing holder for my tools included holder/ not gonna print out a whole tray for over 100 screwdriver bits. i guess ill have to see if reprinting everything is worth