Learn the best way to replace a strut with and without spring compressors - Discover a better ride

Sdílet
Vložit
  • čas přidán 11. 08. 2015
  • In the video, I show how I removed the strut and reinstall them plus I show how to change the strut without spring compressors starting at 11:30 I used a complete strut assembly. I changed my struts on my 2000 Pontiac Grand AM GT V6.
    Treat Oxman to a bottle water paypal.me/oxmanagain?locale.x...
    Complete Struts amzn.to/2j2lXvI
    KYB complete Strut Assembly amzn.to/2H6gBkl
    Single strut amzn.to/2jhRWsk
    Create Your own stories raw.film/?ref=charlesbooker
    After a strut change always get your car aligned.
    No music version • Learn How To Change St...
    Complete strut assemble • Complete Strut Assembl...
    #nospringcompressor #replacestruts #changestruts
    Music from www.bensound.com/
    Bird brainz by Otis Mcdonald
    Dope Steppa by MK2
    Ever felt by Otis Mcdonald
    Dig deep by RW Smith
    Not for nothing by Otis Mcdonald
  • Auta a dopravní prostředky

Komentáře • 796

  • @oxmanagain
    @oxmanagain  Před 5 lety +23

    Get your complete strut assembly and never have to use spring compressors again. amzn.to/2ETXzJV

    • @eastcoastcrim
      @eastcoastcrim Před 5 lety +1

      Saves money

    • @superman21958
      @superman21958 Před 4 lety +4

      But who makes a good quality quick strut? Help us out.

    • @jgrm4443
      @jgrm4443 Před 4 lety +8

      Instead of buying this "Quick-Strut Complete Strut Assembly" I rather getting ripped off by the dealer for several reasons. Those Quick-Struts are never like the original struts. They're either make the front of vehicle higher or those new springs are too thick and make the vehicle worst than the bad struts.

    • @djbhe
      @djbhe Před 4 lety +4

      @@jgrm4443
      Exactly!!! I had that same problem with a mechanic a few days ago about the springs on my car. He trying to tell me I should use the quick struts and I told him I wanted to use my original springs. I'm getting another mechanic to do it.

    • @NGC1433
      @NGC1433 Před 4 lety +2

      Why not just buy a new car? Or even build your own auto concern? You'd be able to afford a superyacht for the spare cash then!

  • @144Donn
    @144Donn Před 6 lety +61

    The most relaxed guy every fixing a car! I am always cussing up a storm at every bolt that doesn't want to come off! Nice job!

    • @oxmanagain
      @oxmanagain  Před 6 lety +1

      Thanks for the comment.

    • @Thatdavemarsh
      @Thatdavemarsh Před rokem +1

      Agree - but there a couple choice edits in there that we’ve all had to deal with. :).
      This is a great video (but backing track level isn’t my thing )and it’s done with common tools and well explained. This sort of info helps teach people what they can do.

    • @gegervary
      @gegervary Před rokem +1

      Me too, I like the satisfaction of accomplishment the job but I hate it, especially in the driveway, getting dirty, bruised, no matter what

    • @kingjamesjames9473
      @kingjamesjames9473 Před 11 měsíci

      😂😂😂😂😂😂 same here cursing so loud that my neighbor comes out to see who I am cursing at

  • @loverworld9220
    @loverworld9220 Před 2 lety +5

    6 years later and this video comes in handy! Much love bro!

  • @andrestl7052
    @andrestl7052 Před 2 lety +2

    Man you explained it better than Chris FIx you are the G.O.A.T new sub

  • @lucasmahood1930
    @lucasmahood1930 Před 5 lety +10

    Hey, well done. You clearly showed all the correct steps. Showing the two ways to get the job done was a great idea too. Most of us DIYers know to always check and recheck the torque specs so when you didn't go totally through that part in detail, we understood. Thanks for doing the video.

  • @woodrow0007
    @woodrow0007 Před 4 lety +4

    Thanks man for the video. Saved me about $400. Did mine yesterday and still had time to watch LSU/Bama.

  • @HUBBABUBBADOOPYDOOP
    @HUBBABUBBADOOPYDOOP Před 6 lety +9

    Very accurate and complete video. I especially liked the advice and trick of loosening the center nut first, then using a wrench to hold the top mount, while removing the center nut.

    • @oxmanagain
      @oxmanagain  Před 6 lety

      Thanks again for watching another video and you're welcome.

  • @1suspect241
    @1suspect241 Před rokem +1

    By far the best how to replace struts video. Every step explained simply and clearly. Everything shown on camera so that we get a good visual. Thank you and please keep it up

  • @moki7850
    @moki7850 Před 4 lety +5

    Thanks so much for putting both options in the video, so that I can show my Dad just one video. I don't think he'll mind the music that everyone seemed to be bothered by. It's the technique, after all, that I am sure they all came for. At least it was my reason for watching. Seems easy enough for a woman to do, if only men would let us. I looked through your other videos while I watched & subbed. You have much talent to be appreciated!

    • @troo_story
      @troo_story Před 2 lety

      "..if only men would let us" !!!! Lady, be my guest. Fill your boots. Go for it. Volunteer here. Why the hell wouldn't we?

  • @johninerie9251
    @johninerie9251 Před 4 lety +50

    Nice vid - and really smart dog you have there - once you went to remove the strut nut he went out the door.....

  • @drkirkpetersondc13
    @drkirkpetersondc13 Před 6 lety +1

    excellent video ! simple, straight forward, no unnecessary jabbering or silliness. I wish this guy would make videos for everything I need

  • @kingjamesjames9473
    @kingjamesjames9473 Před 11 měsíci

    Man, his dog is so tune seeing his master working, and he or she just sat right there watching he's master work .

  • @650gringo
    @650gringo Před 5 lety +1

    Great teaching techniques. This guy is a better instructor than any of the professors I had in college.

    • @oxmanagain
      @oxmanagain  Před 5 lety

      I really appreciate your comment. Thanks for watching.

  • @Adam-7_7_7
    @Adam-7_7_7 Před 4 měsíci

    8yrs ago , and still relevant today. Good vid mate

  • @tadcherkewich2825
    @tadcherkewich2825 Před 7 lety

    Of all the videos, including benz techs, this is the simplest most understandable and accurate video yet. I applaud your straight forward presentation!!

    • @oxmanagain
      @oxmanagain  Před 7 lety

      I really appreciate what you said thanks and I'm glad the video helped. Thanks for watching.

  • @beaufighter245
    @beaufighter245 Před 7 lety +2

    Great how to video. Straightforward and no messing! Nice chilled out style. Thanks for posting. Have mine to do on my Mg ZT, Great tip about loosening the centre strut bolt.

    • @oxmanagain
      @oxmanagain  Před 7 lety +1

      You're welcome and thanks for watching. Good luck on yours.

  • @delbertannis5642
    @delbertannis5642 Před 3 lety +2

    Sweet! Man, I wished I had a garage. Toyota told me a grand to replace my struts. 😳thanks for the inspiration ✌🏽

  • @GregTakayama
    @GregTakayama Před 5 lety +6

    You saved my repair job - I have a 2002 and I wasn't able to get the top nut off, but your breaking technique while it's still mounted did the trick. Thanks!

  • @drerey4675
    @drerey4675 Před 4 lety

    Probably the most easiest video on here. Thanks dude. Appreciate the video

  • @hirammendez4052
    @hirammendez4052 Před 4 lety +2

    So the way to change a strut without using a compressor is to get a complete strut assembly. Good Video.

  • @djjonnybong
    @djjonnybong Před 2 lety

    Doggy stole the whole first half of the video bub. Thanks for the shared knowledge 🙏🏻

  • @jackiejack4659
    @jackiejack4659 Před 7 lety +6

    Good video I never replaced struts before, but with your video I am 100% sure I can handle the job. Thank you good job!

    • @oxmanagain
      @oxmanagain  Před 7 lety +1

      Thanks I'm glad my video was able to give the confidence and understanding you needed. If you have any question feel free to ask. Thanks again and you're welcome.

    • @picklerix6162
      @picklerix6162 Před 5 lety

      I replaced the rear struts on my Mazda 626 before youtube existed. The first strut took me a couple hours because I didn't know what I was doing and I went slow with the spring compressor. Once I figured it out, it only took me 30 minutes to change out the second strut.

  • @datawind3296
    @datawind3296 Před 4 lety +3

    Nice job, and I enjoyed the tip of breaking loose the shock nut before you remove the strut. I wish I had done that first.

  • @waynemcgahon2255
    @waynemcgahon2255 Před 4 měsíci

    Great job. Doing my struts on the weekend. Thanks for the video!

  • @markwales5325
    @markwales5325 Před 8 lety +5

    Well done video, convinced me to get the whole assembly vs messing with compressing an "IED" spring....too old to be bothered with all that. Thanks!

    • @oxmanagain
      @oxmanagain  Před 8 lety +1

      I agree with you the whole assembly is so much easier and safe, plus you get all new components. Thanks for watching and I'm glad the video helped you out.

  • @northpoint1039
    @northpoint1039 Před 3 lety +1

    I really enjoyed your video. Thank you very much. Even though its about 6 years old, Its still very relevant to today's cars. It has'nt really changed that much. Im subscribed now and hope you are still putting out videos :)

  • @darronc5928
    @darronc5928 Před 5 lety

    Great video !!! You describe everything slowly and precisely. I also enjoyed your other video showing and describing the filters comparison... Thanks!!!!

  • @tratymorg
    @tratymorg Před 7 lety +1

    I will get at this over the weekend on a jeep 4x4 thanks again for the video

  • @pablovelazquez1570
    @pablovelazquez1570 Před 2 lety +3

    I do robotics and electronics, I have also learn a lot on my own about automotive mech. Your video, explanation, calmness and easy going are a super plus at the uppest limit (👈not mistake!!!) Thank you for sharing brother. You have two great friends in the background watching you and keeping you safe also, add more points!!!.

    • @oxmanagain
      @oxmanagain  Před 2 lety

      You have a very good eye for the details. Thanks for watching I appreciate the kind words. Enjoy the rest of your day. People like you are the reason I love making videos on CZcams.

  • @captainemeritus5927
    @captainemeritus5927 Před 4 lety +2

    That was a great video and gives me a lot of confidence to proceed and save a lot of money only replacing the failed parts.I want to maintain the same ride specs and this is the way to go. My two dogs watched it with me, too.
    I found the soundtrack interesting. Thanks for the help.

    • @oxmanagain
      @oxmanagain  Před 4 lety

      You're welcome and thanks for watching.

  • @pollyg562
    @pollyg562 Před 3 měsíci

    thanks watched 10 videos looking for the one bit of info you had it and I'm back on the job

  • @ervinb6696
    @ervinb6696 Před 2 lety

    Yo Bro you are the best I've seen yet so many people skip steps on strut assembly which is easy and not realistic or half at best, my knowledge speaks and my money speaks so I like to know all I can and not use so much money to replace already made struts. And if you are putting on fully compressed strut ask yourself how they do that, I know as a growing mechanic and being dormant for a great I want the grass roots how to replace a strut b/c you may be in a situation where all you can get is struts and now what your stuck like chuck, and may later pay more to a mechanic to stab the flesh out of your body, ems, some of y'all better chill and get this knowledge and be glad this man gave us the piece free of charge, organized, and very descriptive. Good piece ma dog you DA Man-Da-mechanic!!

  • @carlosdjclo
    @carlosdjclo Před 2 lety +1

    This guy is fricking awesome at explaining, good job, with a good camera and editor, I can see you getting lots of great content and followers. thank you for this awesome video.

    • @oxmanagain
      @oxmanagain  Před 2 lety

      I appreciate the comment and I'm glad the video was able to help. Thanks for watching and you enjoy the rest of your day.

  • @yandenuts
    @yandenuts Před 6 lety

    Great Vid, and as others have commented, great music. Can always tell a mechanic knows what he is talking about when you see that wheel under the car!! Plus his relaxd, laid back method of instruction. Thanks

    • @oxmanagain
      @oxmanagain  Před 6 lety

      Thanks for watching and I really appreciate the comment.

  • @DOOdooCHASERz
    @DOOdooCHASERz Před 6 měsíci

    you fooled me 😅 i thought you were gonna show me without compression clamps not assembled new strut installation 😅 you good dawg.

  • @Maxumized
    @Maxumized Před rokem

    Nice, even the dogs are chill as this dude…good man

  • @kurtshapiro7856
    @kurtshapiro7856 Před 6 lety

    THANK YOU!! Super helpful! Great music too, though I really like that you also did a music-free one that I can use when I need to. Now I feel like I can change my struts with confidence!

    • @oxmanagain
      @oxmanagain  Před 6 lety

      Kurt Shapiro You're welcome and thanks for the comment. I appreciate the support. Have a good day.

  • @raymiller1207
    @raymiller1207 Před 4 lety +3

    Thanks Man, perfect job well done

  • @mikeez5455
    @mikeez5455 Před 4 lety

    Smart guy, you make it look so easy. Nice tips!

  • @brittaswanson4302
    @brittaswanson4302 Před 7 lety +4

    great video. Gonna subscribe, you are great at editing and you got straight to the point. Great video all around. Gonna try to fix my struts on my 02 Acura RSX.

    • @oxmanagain
      @oxmanagain  Před 7 lety +1

      Ben Salvo I really appreciate the support and I'm glad my video helps you out if you have any questions feel free to ask. Thanks again

  • @ChrisD-kl3ty
    @ChrisD-kl3ty Před 3 měsíci

    Grate video explaining the spring compressor.

  • @wesfields9322
    @wesfields9322 Před rokem

    Most well behaved dogs I've ever seen. In anybody else's house they'll be then help rocket launch that spring.

  • @mnewln1800
    @mnewln1800 Před rokem

    I knew you were a smart guy when you threw that tire under the car. I've been doing that for years! Thanks for the video!

  • @freddubose8539
    @freddubose8539 Před 6 lety

    Great informative video . I watched the whole thing and it actually helped me get it done myself. Thanks

    • @oxmanagain
      @oxmanagain  Před 6 lety

      Glad I could help and thanks for watching. Good job on doing it yourself.

  • @afaulise01
    @afaulise01 Před 7 lety +1

    Thanks! Easy to follow. I thought I was going to have to replace my entire strut assemblies just to replace the mounts, but with your explanation of compressing the springs, I'll leave the struts in place (they're fine) and save a ton ($400+!) by just replacing the mounts ($25/ea).

    • @oxmanagain
      @oxmanagain  Před 7 lety

      You're welcome, I'm always happy when I can save somebody some money. Thanks for letting me know and I appreciate you watching.

    • @HughWoo
      @HughWoo Před 2 lety +1

      You still should change them every 50-100 thousands miles man. You’ll appreciate the ride quality and the rest of your car will too.

  • @basicponymods4501
    @basicponymods4501 Před 4 lety

    The best tutorial video and also a lot tips. I learned a lot from this tutorial. now im able to repair my own car and also to share my videos with all you.

  • @MM-je1tg
    @MM-je1tg Před 4 lety +1

    YOU MAKE IT SEEM SO EASY GREAT TEACHING VIDEO

  • @rmromanko
    @rmromanko Před 3 lety +4

    6:59 when the nut is taken off, Fang the Wonder Dog, "Dude, I'm OUTTA HERE!" :)

  • @woritsez
    @woritsez Před 6 lety

    good clear instruction, relaxed manner, sound light and camera.

    • @oxmanagain
      @oxmanagain  Před 6 lety

      Thank you and I appreciate the comment.

  • @jehangirasad2296
    @jehangirasad2296 Před 5 lety +1

    Thanks man ,very informative video.

  • @kermitefrog64
    @kermitefrog64 Před 5 lety

    Excellent video. Thank you. I have been hesitant to do this job but you make it look manageable.

    • @oxmanagain
      @oxmanagain  Před 5 lety

      You're welcome and thanks for watching.

  • @soylentgreen2065
    @soylentgreen2065 Před 4 lety

    Very well done and thank you for providing the knowledge....very helpful

  • @SoulSurfer407
    @SoulSurfer407 Před 4 lety +1

    Man I'm gonna go for it! Lexus IS 350. Thanks for making it look easy Ox! Big Ups!

    • @oxmanagain
      @oxmanagain  Před 4 lety +1

      I appreciate your comment and let me know how it turns out.

  • @2pood
    @2pood Před 4 lety

    Thanks for the vid. It’s gonna help a lot!

  • @J_Lag
    @J_Lag Před 4 lety +1

    Thanks for sharing this video, it helped a lot 👍

  • @markcurtis6481
    @markcurtis6481 Před 8 lety

    Nicely done, thank you. that method of torquing is exactly what my dad used, I have stripped many a bolt / nut that way so I bought a torque wrench.
    I am doing my 98 buick so needed to see how to do it, looks like something even I can do, thanks again.

    • @oxmanagain
      @oxmanagain  Před 8 lety

      Thanks for the nice words and for watching, good luck on the 98 Buick.

  • @vempriex
    @vempriex Před 4 lety

    Enjoyable and informative video both ways. Your voice is soothing and the music is not too distracting. Unfortunately, plan to buy the whole assembly since it's so rusted except the coil spring. The rubber piece is worn and torn on both front side and driver side there are 2 zip ties ( just discovered after a DIY brake job) holding the strut bottom in place.

  • @dc5723
    @dc5723 Před 5 lety

    3 years old but still awesome, thanks!

  • @estrellasbrillante
    @estrellasbrillante Před 6 lety

    Very nice! Love the tip about loosening the strut head while still in the car. Thanks!

    • @oxmanagain
      @oxmanagain  Před 6 lety

      You're welcome and thanks for watching. Let me know how it goes.

  • @comeliusmcelveen4929
    @comeliusmcelveen4929 Před 6 lety

    Good video; using as a reminder since I haven't placed struts in a few years. Nice sound track.

    • @oxmanagain
      @oxmanagain  Před 6 lety

      Comelius McElveen Thanks, I appreciated the comment and thanks for watching. Glad the video could help and if you ever have any questions feel free to ask. You have good taste in music. You have a good day.

  • @garysteele9141
    @garysteele9141 Před 4 lety

    Good video man! Very helpful, thank you!

  • @scotthicks8338
    @scotthicks8338 Před 6 lety

    Your dogs are great, and thank you for the video. I learned a lot. Have a great day.

    • @oxmanagain
      @oxmanagain  Před 6 lety +1

      Haha, thanks for watching, a lot of people see the dogs. Good eyes.

  • @peterjoseph2803
    @peterjoseph2803 Před 3 lety +1

    Great video Dude.
    I would always recommend replacing the strut support mounting friction bearing. ( i learnt the hard way.) I had to repeat the hole process the week after. (Friction bearing!!!)

  • @rick3747
    @rick3747 Před 4 lety

    I love your dog just watching you work.

  • @blaisemichna8123
    @blaisemichna8123 Před 7 lety +17

    I love the music. The kind of stuff i like to listen to when working on vehicles to help keep me calm.

    • @oxmanagain
      @oxmanagain  Před 7 lety +1

      Thank you for watching and for liking the music.

  • @markclark5356
    @markclark5356 Před 7 lety +1

    Great video. I forwarded it to my son. Good tips. Wheel under the car. I usually do that. Should do it every time. Loosening the nut on the end of the strut while its still attached to the car. Great idea!! I never thought about that. Like you, I struggled getting the nut off after I had the strut removed from the car.

    • @oxmanagain
      @oxmanagain  Před 7 lety

      Mark Clark thanks for watching and leaving me a comment. CZcams is all about giving tips.Thanks again.

    • @skip741x3
      @skip741x3 Před rokem

      we have all at sometime , forgotton to loosen that nut prior to pulling the strut..LOL wwhat I do is use the long bar from my 2 ton jack that you use to raise it up...I just position the bar between 2 of the 4 bolts on the top strut mount ..gives me plenty of stability to keep the mount from turning with the strut laid on its side and the bar keeping the mount still.

  • @mjm7187
    @mjm7187 Před rokem

    Well done, like how you demonstrated at the end that mounting bearin was working

  • @olenaerhardt7725
    @olenaerhardt7725 Před rokem

    Very nice, so unusual music, and very cute doggy, actually there is another one. I feel much more comfortable to do this project after watching the film. Thank you, especially for the tip on braking the nut. I'm replacing the whole assembly, but still that old spring should be released (for safety) before taking it anywhere for recycling or putting it in a trash container.

  • @gsheverything_2716
    @gsheverything_2716 Před 4 lety

    Job well done bro, cause I need a video like that, cause I'm going to try to change my mother's Toyota Avalon shocks

  • @charlesgriffieth
    @charlesgriffieth Před 3 lety

    To be honest with me I appreciate the tip about taking loosen the nut up before taking it all the way off and the music is good I enjoy it very much I really enjoyed it thanks man

    • @oxmanagain
      @oxmanagain  Před 3 lety

      I appreciate your comment about my video and the music. Thank you for watching.

  • @prodog7761
    @prodog7761 Před 4 lety

    Like the muzic one of the best videos for installing struts with hand tools ....helped me alot thanks

  • @1EVE1X
    @1EVE1X Před 4 měsíci

    yo you have all the classic instrumentals. takes me back

  • @kfbob364
    @kfbob364 Před 6 lety

    Great well-made video. I am going to change mine out this month.

    • @oxmanagain
      @oxmanagain  Před 6 lety

      Thanks and let me know how they turn out.

  • @Obed91011
    @Obed91011 Před 7 lety

    Thanks for the video. I am planning to get my shocks changed myself as garage is asking over £120. Some videos says it's too hard. You make it look simple. Cheers

    • @oxmanagain
      @oxmanagain  Před 7 lety +1

      You're welcome and thanks for watching. Let me know how it turns out.

  • @catfish7774
    @catfish7774 Před 8 lety

    your welcome brother thanks a lot man it helped me out a lot God bless you and family

    • @oxmanagain
      @oxmanagain  Před 8 lety

      +cliff hunt I appreciate the blessing more than anything else.That is why I put videos on youtube so I can help people out .Enjoy the rest of your day. God bless you and your family also. Thanks

  • @rowenawilliams7025
    @rowenawilliams7025 Před 7 lety

    Thanks great video,thanks for taking time to do it.I have been quoted $800-$1000 by 4 different shop to supply and fit.I will be doing it myself cheers Paul

    • @oxmanagain
      @oxmanagain  Před 7 lety

      That's what I like to hear, I'm glad you found the video that helpful and I'm glad I could save you some money. Thanks for watching and let me know how it turns out.

  • @KozmikEl7
    @KozmikEl7 Před 7 lety

    smooth music bro great video have to use this when I'm doing my diy's on my car!

    • @oxmanagain
      @oxmanagain  Před 7 lety

      N54 Lord Thanks for the support. I'm glad you liked the music some people talk about it. Thanks again.

  • @orionparkbench
    @orionparkbench Před 7 lety

    your an absolute bloody legend mate. thanks a trillion

    • @oxmanagain
      @oxmanagain  Před 7 lety

      You're welcome, and thanks. Best comment ever.

  • @mtnnoel63
    @mtnnoel63 Před 7 lety

    thx for the video. a nice refresher. it had been awhile since I replaced struts.....

    • @oxmanagain
      @oxmanagain  Před 7 lety

      Mtn Noel thanks for watching and you're welcome.

  • @johnkerr8019
    @johnkerr8019 Před 6 lety

    Great video, I bought a set of those compressor springs 20 years ago, used about twice, but they do work well. I've picked up some good tips here, all the best from Glasgow

    • @oxmanagain
      @oxmanagain  Před 6 lety

      You're welcome and thanks for watching.

    • @deasttn
      @deasttn Před 6 lety

      Yeah, those compressors are the sort of tool I think I will rent from auto store.

    • @oxmanagain
      @oxmanagain  Před 6 lety

      deasttn I think it is a better deal to rent them because you can return them when you're done. Let me know how the job turns out and thanks for watching.

  • @johnnychisum3254
    @johnnychisum3254 Před 5 lety

    Haha very funny! Very informative! Thanks for the video

  • @reallyman941
    @reallyman941 Před 2 lety

    Just what I needed to see. Thanks.

  • @hermanheierman1790
    @hermanheierman1790 Před 6 lety

    great video, great job on explaining each step. thank you.

  • @StuartOliver83
    @StuartOliver83 Před 6 lety +19

    I hate working with coils,it's like handling a shot gun with faulty safety switch lol cheers for sharing

  • @lorenabowers205
    @lorenabowers205 Před 4 lety +1

    Good video, very informative. There are parts where what you are saying is drowned out by the music though. Thanks for making this video.

    • @oxmanagain
      @oxmanagain  Před 4 lety +1

      Thanks for watching I appreciate you taking the time to leave a comment. Yes, I know this was early in my CZcams career and the music was a little loud. I appreciate you seen it in such a nice way. You have a nice day.

  • @jdruedger
    @jdruedger Před 2 lety

    Thanks for the video. You did a great job.

  • @RotiPani75
    @RotiPani75 Před 5 lety

    Good stuff man. Keep it up!

  • @sharpemang
    @sharpemang Před 5 lety

    Thank you for this man!!!

  • @mikebarb86
    @mikebarb86 Před 7 lety

    thank you great video you may have saved my life. I had no idea about the dangers of the shock.

    • @oxmanagain
      @oxmanagain  Před 7 lety

      You're welcome and I'm glad I could help.

  • @suchasreallife
    @suchasreallife Před 3 lety

    I love seeing people work on cars with no rust

  • @BillSikes.
    @BillSikes. Před 4 měsíci

    This is super helpful, thanks bro 🤙

  • @28tpi
    @28tpi Před 4 lety

    Good Video. Thanks for posting!!!

  • @EXcellence2
    @EXcellence2 Před 7 lety

    Nice work man. Was easy thanks to you. :)

    • @oxmanagain
      @oxmanagain  Před 7 lety

      Thank you for letting me know and I appreciate you watching.

  • @Kuwandi
    @Kuwandi Před 6 lety

    so far you have the best lighting *** I can seeeeee

    • @oxmanagain
      @oxmanagain  Před 6 lety

      I'm glad I could help, thanks for watching.

  • @linoaguilar3038
    @linoaguilar3038 Před 4 lety

    Very good fella! Buen trabajo amigo. Buen tuturial.

  • @brazidas58
    @brazidas58 Před 3 lety +1

    love the two helpers.

  • @mikestrickland2755
    @mikestrickland2755 Před rokem

    You make it look so easy! :D

  • @g3o5d
    @g3o5d Před 7 lety

    Thanks for posting. I have to do this in a couple weeks on a '07 Mitsubishi Outlander. Was trying to get the Quick-Struts but they don't make them for my car. Searched everywhere online. Ordered Spring compressors and struts from Amazon. This video helped with a lot of questions I had. Thanks again. Good Thoughts!

    • @oxmanagain
      @oxmanagain  Před 7 lety

      Fred Olivo I'm glad I could help you out. Struts can be a little challenging so if you have any questions feel free to ask. Thanks for watching and have a good day.

  • @costasstephanopolis1688

    Very nice video and great work. Thanks for sharing and stay blessed...!

    • @oxmanagain
      @oxmanagain  Před 6 lety

      I'm glad the video was helpful, I appreciate you watching and thanks for the comment.

  • @carlosvpallares1407
    @carlosvpallares1407 Před 7 lety

    excellent video..thanks for sharing your experience with us..

    • @oxmanagain
      @oxmanagain  Před 7 lety

      You're welcome and thanks for watching.