S&M Intrakit Flatland Custom Frame Build @ Harvester Bikes
Vložit
- čas přidán 13. 11. 2019
- S&M had their two flatlanders, Chad Johnston and Sean Mckinney, go all out to make the Intrikat Frame perfect. To reach that lofty goal, True Temper's SuperTherm chromoly is used along with a short top tube and steep head angle. In addition, this ride sports a Mid bottom bracket, a low-profile integrated seat clamp for a clean look and an integrated head tube drilled for gyro tabs. Thread-on 990 mounts and 14mm dropouts finish off the frame. And like all S&M sleds, the Intrikat is handmade in their Santa Ana, CA shop.
Made in Santa Ana, California, USA.
Seatpost clamp integrated into the frame
Removable brake mounts and gyro tabs sold separately
New Shield engraved into headtube
Butted ThermalX ChromolyTubing
Bullet seat and chain stays for a nearly smooth transition into the dropouts. Smooth pivoting and no catching your shoes on the stays
All frames include integrated chain tensioners
TOP TUBE 19".19.5",20",20.5"
REAR END 13
HT ANGLE 75°
HEAD TUBE Integrated
SEAT ANGLE 71°
SEAT CLAMP Integrated
SEAT POST 1" (25.4mm)
BB HEIGHT 11.8"
BB STYLE Mid
STANDOVER 7.65"
BRAKE MOUNTS Thread-On (sold separately) 990 Mounts
DROPOUTS 14mm Slot, 4Q-Baked
GYRO TABS Removable - sold separately
WEIGHT 4.28 lb
TUBESET ThermalX chromoly
Editor: Royee Ben-Chorin - Sport
Awesome!
More flatland builds please!
Sick frame ...I used own one ..sick welds ..more great frames ...I have get anther one go with my sabbath
Thats a dope frame, and really cool flatland type build!
I always liked this frame but it was at a point in flatland when the frames weighed more than I did 😂😂
I like that shirt, man!
Nice to see some flatland!! Right on
You do the best work I've ever seen!! Nice job brother!!
That's a nice bike, great parts too. 😃👍👍
That bike is dope
Smooth
Hot set
He'll yeah harvester flatland parts in your shop yeahhhhhh!!!!!!!! I have been waiting for this 💯💯💯🤘 oh yeah btw this is the flatland guy at downtown Toronto 👍fire🔥🔥🔥midsss
Sweet
They have one of the best components I like the s and m dirt bike I’m definitely Ganna check out the website
You should do an old MirraCo build.
Awesom
Oooh baby s&m 😎
Sweet build/video mate, how much would this cost?
Dude, nice ass bike but next time either cut down the steer tube or swap some spacers to the top. That looks just bad like that
Coool
How much is the frame
Chingon men
Kiero una i gual
Flatland with no gyro?
that's a looong neck
Probably didn't wanna waste time cutting the forks down
Why so many headset spacers 🤦♂️
To fit the stem on I'm assuming
Yeah I think the steer tube on the forks were to long
@@matthubbard904 yeah he probably cut them down off video just probably didn't have time to do it yet
Tyler Albertson yeah probably