FHB3500
Vložit
- čas přidán 6. 09. 2018
- Mobile Hebebühne Finkbeiner FHB3500, Tragkraft 3500 kg / 3,5 t, für PKW und Transporter, energieautark durch Batterieantrieb, überall aufstellbar, leicht von einer Person verfahrbar, große Hubhöhe von 194 cm, hydraulischer Antrieb, Lastaufnahme mittels 4 Gelenkarme mit Spindel-Gummiteller.
Beispielsweise für Transporter wie Mercedes Sprinter, VW Crafter, MAN TGE.
Mobile vehicle lift Finkbeiner FHB3500, capacity 3500 kgs / 3.5 t, for cars and vans, independent by battery power, anywhere to install, easy to move by one person, large lifting height of 194 cm, hydraulic drive, load support by 4 swivel arms with spindle rubber pads.
For example, for transporters such as Mercedes Sprinter, VW Crafter, MAN TGE.
Mobile lift Finkbeiner FHB3500, capacité 3500 kg / 3,5 T, pour voitures et VUL, autonome en énergie grâce au fonctionnement par batterie, mise en place partout, déplaçable facilement par une personne, hauteur de levage de 194 cm, entraînement hydraulique, support de charge à l’aide de 4 bras télescopiques avec plateaux de fuseau.
Par exemple, pour les transporteurs tels que Mercedes Sprinter, VW Crafter, MAN TGE. - Auta a dopravní prostředky
This is the kind of present I was looking for my lovely mother in law.
😂😂🤣🤣👍👍
💀💀💀💀🤣🤣🤣🤣
🤣👏👏👏
🤣🤣🤣
😁
When you see that van a rockin’.......RUN,
When you're on a bridge and its rocking - you do the same? The flex of the steel is taken into account in the engineering calculations.
@@johnmichaeltwist5086 You're a dork......
This actually to me looks more stable then a typical two post lift.
1:20 I like how this mechanism gives an impending sense of doom
gahahaha
Thought so too 👍
I think that's actually the safety feature. If there's anything wrong with the hydraulic, that thing will stop it from just free falling
For those who are wondering all lifts rock and move. Flex is designed into it. Just like bridges and skyscrapers.
@@turbomustang8417 It's actually NOT designed into the system. It's a default result of the systems design. Steel acts like a spring and every type of structure has a degree of flexibility that you cannot get away from. It always a compromise between how much you want the structure to weight vs how much flexibility you're willing to tolerate vs how much stress the structure can accommodate safely.
Now for the $300 Harbor Freight knock-off.
Stop believing the fake news fear porn propaganda! Book by Dean Koontz in 1981 called Eyes of Darkness foretells the Corona virus [(which was changed to Covid -19 )] in this book as WUHAN -400 ( 400 is 20x20) the year 2020 was on the Chinese scientist named Li Chen and had in his possession a diskette with the virus on it
😂👍🏻
bahahahaha
@@stephenbartram7377 things like this are the god head doing it, coincidences like that are well beyond the realm of human planning.
Hahaha perfect!
Oh youtube algorithm, why has thee brought me here.
*thou
Maybe because your vehicle is about to break down
@@lyt_w8t "Don't thee thou me, thee thou thissen, and 'ow tha likes thee thouing."
+shingnosis Google knows that your car is about to need major repairs!
@@shingnosis
Huh.
They should make an inflatable version for easy storage.
Brilliant piece of kit, gamechanger for the professional mechanic seeking to control business overheads.
Idée simple et efficace... J'aime sa !
This is The fantastic Germany people ! From here Brazil São Paulo. God bless you amazing. Hugs
God bless germans???
Think it twice!
OMG. I have no idea why this appeared in my recommended for you feed but watching this I couldn’t decide if I was having a really cool dream or a terrifying nightmare. I just hope there’s a sequel.
We are truly living in great times here folks. The suicide booth from futurama is finally here!
That’s AWESOME!! Leave it to the Germans to invent something amazing in the automotive industry
I love this and would love to have one but...I'm good with my QuickJack system!!
Бесподобное чудо даже в обычном гараже будет круто 👍
Genial saludos cordiales desde Patagonia Chile
Good job!
german version: 100% safe. import version: human mouse trap
LMFAO.. 😂😂😂
The only thing missing from that machine is a brain, and sometimes that's missing from the operator as well.
This just in! Harbor Freight announces new portable car lift, Only $600. 20% Coupon Good this weekend Only!!
BobbyZ lol whats todays date?
@@chris24gone ha yep!
Вот что значит подходить к делу серьёзно.
Респект и уважуха.
Доброго здоровья. Не говори. Точно.
This virus got me deep into youtube.
Use Norton Antivirus
@@johnmichaeltwist5086 okay. I see what you did there
😄
LOL!
Holy cow, that's awesome
Leave that cow alone.
Wow love it ......very nice
Impresionante¡
I like finkbeiner equipments
💪👍...Cool !!
als mechaniker sehe ich euer hebebühne zu und staune..... welch eine ideereiche lösung. hut ab
Very useful and easy to MOVE.
For when Walmart starts selling cars and putting them on the top shelf..
Parabéns ao idealizador deste elevador.
1am and I'm watching a video about a pallet truck on steroids
🤣🤣🤣🤣🤣👍
😂👍😂 comments like this make the read worthwhile .
Frank Jenkins: Absolutely!!
....ready.....set....and FIRE !! (that said, We like this a bunch)
extremely well thought out
Awesome recommendation
Simply Wow!
Perfect !
Excellent congratulations
Hey that's pretty dope
Good work
Nice lift. I would have no problems using a lift like this. My question is how much does it cost in US dollars because it looks quite expensive.
Ok, but how stable is it? That thing was wobbling when he got it up. I wouldn’t work under it. What does Ave think of it?
Waouh !!!👏👏👏👍👌
So beautiful
Wow how interesting all I had to do was type in the CZcams search bar was best anti-car device on the market and here I am.
Quality German engineering. Those schmetterlinge know how to build anything.
especially "check engine" lights lmao
Very clever
😯 I like that that’s so 😎
Muito bacana
oh how i would love to have this on the driveway
Нихрена себе домкрат 😲
Nice car flipper
Super
Very dengerous
Brilliant.
That’s a random vid!!!!
Amazing to see....... not sure if I’d work under that motor 😧😬
This would be great for a home mechanic, the only downside I see is if you need to lift the body off like what needs to be done with pickup trucks today to get to the engine. It doesn't lift straight up, which is the same issue I have with my lift I have now. Might work OK if just lifting a few inches to replace the body mounts, but wont work if doing engine work.
Nice looking lift, nice engineering job but i will never trust something like this.
That’s exactly what I was going to say !!!
Always wear a helmet.
Idk... I would have to see just exactly what the safety features are on it-- like the ratcheting safety lock stand. I bet the specs aren't much different than a stationary lift and with the way center mass sits forward in lift position basically using the vehicle's weight to pinch the lift to the ground, like a fulcrum, it would create stability in the elevated platform itself. With the ratcheting lock stand it appears to hard-lock itself in position vs depending on just the hydraulics themselves, which I like the idea of-- the only thing I think that I would add is a couple of simple ratchet straps to secure it to the lift stands just to make sure a vehicle that was slightly off center couldn't walk itself out of position on the stands if someone was being aggressive on a rusty, stuck bolt like older vehicles tend to have on them. If it folds up easily, that lift could be very helpful to smaller racing crews, on-site repairman and some service technicians (for example tire changers that work out of open lots since they don't have to raise the vehicle all that much). The biggest thing I think anyone would have to watch for during use would be to ensure that it was set up for operation on flat, level ground which a couple of a built-in level vials (along with a set of built-in screwjacks on the base) could possibly help indicate, including safety shading that would tell the operator when the floor is too angled for safe operation. Apart from that I think I wouldn't mind trying it out if I ever needed a vehicle lift. It's rather ingenious and practical really-- if the price is reasonable ...
No, this is a very good design indeed.
Looks a little iffy, but if it's tested with a factor of safety of like 3 or something, I'd trust it.
Ferramenta linda
Click!
Nice!😁
Impressive
Top
Cool. I want one of these. Do you need reinforced concrete floor?
Jaa, this is good. Cool hoist. We need this kind of tools on the other side of the big pond - seems like American ingenuity kind of sucks lately. We use German made Hofmann hoist and other garage machinery on daily basis and thanks to free trade with EU we can get finally good quality parts for European made cars.
@Wayne M Hell Yeah Brother!!! This guy ain't an American!!! Fuck the Commie EU!!! God bless DONALD TRUMP and the tariffs he's imposing on their asses!!! They've been taking advantage of the US for far too long!!!
Keep Rocking in America Brother!!!
@@rockerpat1085 ys
Кто бы мне такую подарил на день рождения!!👍
Interessante
How do you work on front brakes with that mechanism in your way? Where do you store this when not using it? A little wobbly at the top. No Thanks!
boa noite , show
Dont know why Iam here, but this thing looks nice, pretty mobile and small considering what it can lift.
A good 1:51 spent! 👏🏻 👏🏻
Интересная штука.
Весьма :). Более подробно о подъёмнике здесь: www.areon.su/catalog/8450
Падают с подьёмников которые в бетон вмантированные,а тут такое
Проверено, выдерживает землетрясение до 3 баллов. Машина не падает
Падают по 3-м причинам: плохие полы, плохие анкеры, низкое качество подъёмников, преимущественно, китайского производства. В данном случае устойчивость конструкции в значительно меньшей мере зависит от качества полов, т.к. достаточно того, чтобы пол выдерживал нагрузку, приходящуюся на площадь основания подъёмника, равную массе автомобиля+масса самого подъёмника. В отличие от обычного двухстоечного подъемника при подъёме автомобиля здесь не возникают силы, стремящиеся вырвать анкеры из пола, вся нагрузка равномерно распределяется на всю площадь основания подъёмника. Сама конструкция подъёмника значительно более прочная по сравнению с дешёвыми двухстоечниками за счёт применения замкнутых профилей сповышенной устойчивостью к изгибающим нагрузкам, толще и сам металл, в чем можно убедиться, сравнив массы подъёмников: так, масса популярных подъёмников Т4 начинается от 590 кг, а этот подъёмник весит 1350 кг. Естественно, его безопасность подтверждена европейскими и российскими сертификатами безопасности и соответствия.
@@user-te8bx4di8c,а какая тут толщина стенки профилей?
Awsome
Totally need this. You guys should reach out to me. Whats its max lifting capacity in LBS?
3500kg - why would anyone use lbs?
Finkbeiner, scaring the shit out of auto mechanics since 1927.
Супер
Что то стрёмно как то он качается.
Been reading Bernard Cornwell?
Опосян да? Ну если оригинал я думаю нормально, а если копий то сомнения есть.
А типа 2х стоечные не качаются когда на них висит 2.5 тонны ? Точно так же .
А что не показали как работать, с применением мотажек, кувалд и ТП. Ну допустим колесо закисло и сбить нет возможности без увесистого аргумента.)))))) Поднять опустить на любом можно а вот силу приложить.
I like that
Lots of naysayers here say they’ll never walk under one of those, but I have a feeling 100 % of those people have never walked under any kind of lift, car lifted or not.
If the Van is a rocking dont come a knocking 💥💥💥💥
Impressive yet scary
I don’t know what I would do with this but I find myself wanting one. It might be fun to lift a neighbors car at night and pretend to be as shocked as they are in the morning. 🤣
On the packet: "Uses 4 - AAA batteries. Not included" -
🤣😂👍
👏👏👏👏👏👏👏
BRAZIL AQUI PARABENS
Wobbly:) and not mobile! Just moveable!
Very cool and creative. But nothing is more sketchy than seeing those teeth clink and knowing that's what is saving your life.
For those times when your just.. sick of living the safe life.
I guess if nothing else matters in life go for it.
Les allemands ❤️
Very nice. Are these sold in the US? Do you manufacture wheel alignment lifts? I would like more information on this unique design; please have someone reach out to our company please.
Das is goot
The safety catch mechanism is a casting ?
Oh, me want one!
Innovative
good
Fantastic seems thing small did good job why can't you make a jig for lifting machine and to move up to few feet.
THX Surround sound audio intro
I agree, i don't know how i got here... I did do some query for Johny buckets and homemade backhoe ! or maybe it's...
😻
Wow😯
Sounds like the terminator song lol with all those clicks