How to Setup Canon PIXMA TR4720 Printer For the First Time +Connect to PC & Scan

Sdílet
Vložit
  • čas přidán 22. 02. 2023
  • I will guide you step by step how to setup your Canon PIXMA TR4720 Printer for the first time (Connect to Wi-Fi, Pair with Computer, Load Paper, Scan..)
    ↓↓Amazon links↓↓
    ►Compatible Canon Ink Catriges (Black+Color): amzn.to/3KsyHwe
    ►Compatible Canon Black Ink Catrige (PG-275): amzn.to/3YbS2Fj
    ►Compatible Canon Color Ink Catrige (PG-276): amzn.to/3Ezvmrv
    ●PAPER FOR YOUR PRINTER:
    ►Canon Photo Paper Glossy 4" x 6": amzn.to/3klBWuP
    ►Canon Photo Paper Glossy 8.5" x 11" : amzn.to/3KyHsVC
    ►Canon Photo Paper Matte 8-1/2 x 11: amzn.to/3XUUPlV
    ►Multipurpose Copy Printer Paper 8.5 x 11 : amzn.to/3ZhEgBS
    ●PRINTER USED IN THE VIDEO:
    ►Canon PIXMA TR4720 Printer: amzn.to/3SrCJa1
    ●Alternative Canon budget printer:
    ►Canon PIXMA TS6420a: amzn.to/3XXYHCO
    ►Canon Pixma MG3620: amzn.to/3m2SR5T
    ●Alternative Canon Megatank printer:
    ►Canon PIXMA G6020: amzn.to/3kllRFt
    ►Canon PIXMA G3260: amzn.to/3XXUmj5
    The Amazon links above are affiliate, which means that I may get a small commission from them if you decide to buy something on their website. This is to support this channel :)
    Don't forget to like and subscribe if this was useful to you!
  • Jak na to + styl

Komentáře • 123

  • @NuclearTreerat
    @NuclearTreerat Před 8 měsíci +8

    I am... Impressed.
    After a day of beating my head against the brick wall that was Canon's instructions I found this. And it is so much BETTER. No leaving out key parts, no assuming that we are both experienced IT people and utter technophobes at the same time. 15 minutes total and most of that was me figuring out how to put in the password.
    Again, so much better than the official instructions and help.

  • @frankhoboPA
    @frankhoboPA Před 5 měsíci +13

    Well presented. He got right to the point without the usual soap operas.

  • @claudejohn4822
    @claudejohn4822 Před 9 dny

    I've just bought this same type of printer today.
    Having no idea how to operate it. This video has raised me from complete scratch. 🎉🎉🎉😊❤

  • @jessika6360
    @jessika6360 Před rokem +5

    I am dead serious I watched this video for the scanner setup..... Who would have thought that the reason I couldn't scan stuff was because I didn't have the scanner app. What happened to things being basic plug the cord in and it's connected. hahaha derp. Thank you for doing this for people like me who need a little extra guidance but don't really want to ask again lol. You are defiantly my hero right now!!!!

  • @hanaah1111
    @hanaah1111 Před 2 měsíci +2

    Omg finally I got my printer connected with your video! The angst and frustration of simply getting a new printer printing. Thank u sOoooo much!

  • @catherinehunt3617
    @catherinehunt3617 Před měsícem

    I literally NEVER leave a comment on a video but someone should buy this man a beer! This is the most concise instructional video I have ever watched. What I thought would take me hours, only took me the 8 minutes of this video. AMAZING!

  • @suomalainen275
    @suomalainen275 Před 2 měsíci +2

    Very helpful! Much better than Canon instructions. Thank you!

  • @valerierichardson873
    @valerierichardson873 Před 10 měsíci +6

    Thank you for this tutorial, exactly what I needed!

  • @vincentmontez2322
    @vincentmontez2322 Před 11 měsíci +3

    Thank you I couldn't figure out how to save scan to computer. This worked great and easy to follow.

  • @JAtube21
    @JAtube21 Před rokem +7

    This was a very good tutorial. Thank you!

  • @tangerine8345
    @tangerine8345 Před 7 měsíci +4

    This was a great step by step video! Thank you soooo much! You made the process so easy and fast. I appreciate it! 🙏

  • @twinksheartsong4478
    @twinksheartsong4478 Před 10 měsíci +1

    Thank you for this tutorial...much appreciated!

  • @paulgosal2855
    @paulgosal2855 Před 5 měsíci +1

    I like that his videos are always brief, but informative and to the point. Good stuff.

  • @minahunt7224
    @minahunt7224 Před 2 měsíci

    Excellent, thank you! I have spent hours trying to set this printer up - you made it very easy. Thank you.

  • @ShnikR1986
    @ShnikR1986 Před 3 měsíci

    This was very informative! It walked me through the entire process of setting up my new printer. Thanks!

  • @premiertrading
    @premiertrading Před 9 měsíci

    Thanks so much! This is the best video about this topic. Wish I had found it before.

  • @vickib.williamson3444
    @vickib.williamson3444 Před 3 měsíci

    Thank you! Thank you! Thank you! Very easy to follow and we are PRINTING!!

  • @valerireilly
    @valerireilly Před 3 měsíci +1

    This helped me so much in just watching the first half thank you!!!

  • @user-mc3ur3pw8u
    @user-mc3ur3pw8u Před 6 měsíci

    Such a great video, thanks for the help!

  • @Maishu777
    @Maishu777 Před 2 měsíci

    My printer instructions was showing blank paper laying on the light gray tray for the printer to pull in and use... You showed in your video that the paper went under the gray tray in between the 2 blue adjustable paper guides. Thank you very much. Now I need to figure out how to get it to print darker. Great video thx a lot. :)

  • @kimberlygreig7901
    @kimberlygreig7901 Před 11 hodinami

    extremely helpful! very well presented worked right away no problems.

  • @christineallen339
    @christineallen339 Před 10 měsíci +1

    You made the set up so easy!!!!!!

  • @Pattyn2024
    @Pattyn2024 Před 8 dny

    Great video and to the point. Made set up quick and easy. Thanks!

  • @Dakiniwoman
    @Dakiniwoman Před 7 měsíci

    Thank you so much for this video, it really helped me to set up my new printer.

  • @cococcake9370
    @cococcake9370 Před 4 měsíci +1

    I'm ordering mine today

  • @CraigTorango
    @CraigTorango Před měsícem

    Thank you so much for helping me setup soooo much easier.

  • @espetoussaint
    @espetoussaint Před rokem

    Very helpful thanks so much

  • @km9873
    @km9873 Před 3 měsíci

    Thank you so much for this very helpful video.

  • @seven8n235
    @seven8n235 Před rokem +1

    Thank you for excellent instruction. The Canon setup routine and help is TERRIBLE and it took me over two hours , until I found your videos.

  • @DonJulioTaco
    @DonJulioTaco Před 3 měsíci

    Very helpful. Thank you my friend. God bless!

  • @IamGilgamesh
    @IamGilgamesh Před 2 měsíci

    Thanks! Got me sorted out!

  • @teresaboggs8609
    @teresaboggs8609 Před 4 měsíci

    Thank you Sir. You made set up so easy.

  • @angelk3912
    @angelk3912 Před 10 měsíci

    Best video.. thank you 🙏🏾

  • @sequoiasmalls9358
    @sequoiasmalls9358 Před měsícem

    sooo useful! thank you so much!

  • @carolinacharm_asmr6095
    @carolinacharm_asmr6095 Před 6 měsíci

    Great video thank you I just set up my printer

  • @AudreyLove-gl5cf
    @AudreyLove-gl5cf Před 2 měsíci

    This was a great help, Thank you so much

  • @user-gq8tq9pu7k
    @user-gq8tq9pu7k Před 11 měsíci +1

    Thank you, excellent tutoral

  • @SurfWhammy
    @SurfWhammy Před 10 měsíci +1

    I'm on the Mac, and your video provided the necessary information. For reference, I was not able to find the delete key when entering the WIFI password. So I just started the Manual WIFI Setup over; selected my WIFI; and entered the password correctly after a few tries. As you said, the asterisk button changes the current character input from lowercase to uppercase to number. The best part is that your video provided the information I needed. The online Canon manual was useless. The paper "jammed" the first time I tried to print, but this was because I pushed the paper too far forward. After correcting the paper insertion to match the paper in your video, it worked nicely. Thanks for the video. I tried using the online manual for the PIXMA TS4700, but it was very confusing. I have the same Canon printer as the one shown in your video. Your video is straightforward and easy to follow, even though it is for a Windows PC. It's pretty much the same for the Mac, and I got it all working nicely after watching the first 5 minutes of your video. Once the printer was connected successfully to my WIFI, the MacBook Pro (Retina, 13-inch, Late 2012) running macOS Catalina recognized it in Printers and Scanners (System Preferences), including the correct Canon printer model number, Canon fax model, and so forth. When that was done, I printed from Preview (macOS app). Very nice! Later I will focus on getting it to work with my iPhone 12 mini (controlling the printer, printing, and so forth). Excellent video! Thanks! P.S. I subscribed to your CZcams channel and gave the video a "Thumbs Up!"

    • @doitdiddy
      @doitdiddy Před 7 měsíci

      CZcams videos are awesome to learn how to do things. It is now my go to place to learn.

  • @sweetpea7603
    @sweetpea7603 Před rokem +1

    Great! Easy to follow!

    • @Bigbopperairguns
      @Bigbopperairguns Před 10 měsíci

      How do you tipe the numbers on the wifi passwork

  • @BHR09
    @BHR09 Před rokem

    Ok I understand, thanks 👍

  • @pamparker4047
    @pamparker4047 Před rokem

    Excellent tutorial ❤❤❤❤

  • @childofGod316Adri
    @childofGod316Adri Před 3 měsíci

    thank you it worked!

  • @ludyacevedo3728
    @ludyacevedo3728 Před 9 měsíci

    Great information and tutorial

  • @JoeIsles
    @JoeIsles Před měsícem

    Thank you very helpful.

  • @b33lz
    @b33lz Před 10 měsíci

    I have a question. I just need this to make copies, do you need to go through all the steps setting up the computer if you only plan on using it for making copies and not printing anything from the computer?

  • @loricordero816
    @loricordero816 Před rokem +1

    Great video. Canon app sucks. But I did through out 2 perfectly good cartridges and added starter and it still wouldn't work until I read the comment below about pressing super hard. Then it works and I cried about my unused cartridges since they cost about the same as the printer. Second little Canon though. Workhorse!

  • @ronnietownsend2079
    @ronnietownsend2079 Před rokem

    Best video hands down thank you

  • @chrisolean
    @chrisolean Před 3 měsíci

    This helped a lot thank you 🙏

  • @thomasdavid1750
    @thomasdavid1750 Před 6 měsíci

    thanks for your help

  • @luemoonba
    @luemoonba Před 2 měsíci

    Thank you so much.

  • @anampatel3468
    @anampatel3468 Před měsícem

    Thank you!

  • @karlafigueroa5218
    @karlafigueroa5218 Před 2 měsíci

    Thank you so much 😊

  • @stefanverstappen2683
    @stefanverstappen2683 Před 2 měsíci

    thx for the information

  • @user-rv7nc9op8v
    @user-rv7nc9op8v Před 3 měsíci

    Thank you so much

  • @vanneronyse9657
    @vanneronyse9657 Před 6 měsíci

    Great thank you

  • @charnitabarnett
    @charnitabarnett Před 5 měsíci

    Thanks for making this video. If you have a video showing even more instructions can you drop a link.

  • @specialbeamcharlie7250
    @specialbeamcharlie7250 Před měsícem

    Thank you so much! I couldnt get the keypad to switch to numbers for like 2 hrs...

  • @melcarter6451
    @melcarter6451 Před rokem

    Very nice presentation, thank you

  • @kennethvisconti2565
    @kennethvisconti2565 Před 2 měsíci

    Big Help!

  • @peterrichard7537
    @peterrichard7537 Před 5 měsíci +1

    I just got this printer for Christmas and when I install the ink cartridges, the printer says they’re not installed and is still prompting me to install them… any help?

  • @NeciBryant
    @NeciBryant Před 4 měsíci

    Do you need a phone jack to fax or is that wireless too?

  • @joelee720
    @joelee720 Před 3 měsíci

    Thanks alot

  • @carlenedwyer8877
    @carlenedwyer8877 Před 10 měsíci

    Thank you sir

  • @seydichavez2111
    @seydichavez2111 Před 10 měsíci

    Thank you

  • @vaughn6371
    @vaughn6371 Před 8 měsíci

    EXCELLENT!!!

  • @SoUtHMeMpHis
    @SoUtHMeMpHis Před měsícem

    Does the display screen on the printer light up?

  • @JAYDEESOTELO
    @JAYDEESOTELO Před 7 měsíci

    Hi I just bought mine today, my scanning cover was lose. Is it same as yours?

  • @TheEndleader
    @TheEndleader Před 5 měsíci

    Thanks, Hero

  • @nanachavis
    @nanachavis Před 10 měsíci

    Hello just wondering will this connect to my Samsung phone and my apple ipad

  • @kirbiejohnson4475
    @kirbiejohnson4475 Před rokem +1

    this was more informative than the cannon website, the only thing, when it came to entering numbers in the pw was like whoa. I appreciate the time you took to do this tutorial though.

    • @TricksTipsFix
      @TricksTipsFix  Před rokem +1

      Thanks for the feedback. I'm always surprise to see how Canon, a multi billion $ company can't produce clear and easy to understand tutorials for their own products.

    • @pamparker4047
      @pamparker4047 Před rokem

      You are so right ❤

  • @ivanvanegas124
    @ivanvanegas124 Před 6 měsíci

    Fantastic...

  • @justsomedude4097
    @justsomedude4097 Před 10 měsíci

    perfect

  • @spicybro
    @spicybro Před rokem

    Do i have to press the ink cartridges really hard

  • @IlyaAckerman-dw7gu
    @IlyaAckerman-dw7gu Před rokem

    Very useful

  • @morganadundee7461
    @morganadundee7461 Před 7 měsíci

    Thanks Buddy, got the printer working but could not get scanner to work.

  • @torunit4620
    @torunit4620 Před 6 měsíci

    Canon ought to pay you to do this.

  • @midulcecocina1818
    @midulcecocina1818 Před 6 měsíci

    Does anyone sell does Cartridge with out ink ? I am trying to convert the new cannon G7020 to edible ink but it won’t work out inserting the Headprint which is the the black cartridge and color cartridge. If any one knows who sell empty cartridge.

  • @wayalone70
    @wayalone70 Před měsícem

    Hi, my printer is making paper stuck now. Would you show me how can I fix it? I purchased this printer 6 months ago.

  • @billholder253
    @billholder253 Před 5 měsíci

    To Find The PDF Option File Type area:
    In the Left pane, just below the Scanner, you can see the Source. change from Auto-Configured to Flatbed and then you can selt PDF as the File Type drop-down.
    A Neat hidden option.

  • @lightining10
    @lightining10 Před 6 měsíci

    Why can't I lower the blue retainer? Help please

  • @valerietakvorian1084
    @valerietakvorian1084 Před 3 měsíci

    The more technology, the more difficult it is to set up. I have always had canon printers, but now there are more steps to set them up.

  • @martybyers4122
    @martybyers4122 Před 3 měsíci

    Mine was working great then stopped a couple pages in it just stopped and won't print the screen

  • @jillballantyne1870
    @jillballantyne1870 Před měsícem +1

    mine will not find printer it is there but ugh---wont connect :(

  • @THEDORKKNIGHT1
    @THEDORKKNIGHT1 Před 5 měsíci

    Can you show how to connect with Chromebook laptop

  • @jamiisegura6205
    @jamiisegura6205 Před rokem

    How to fix a support code 5100 ?! It's a brand new printer and it's telling me this.

  • @Seth-ff5lp
    @Seth-ff5lp Před rokem

    I've got a tr4722 is it the same setup ?

  • @praveenkokkirala
    @praveenkokkirala Před 6 měsíci

    While setting up I had to use my mobile's flashlight to read the instructions on the LCD screen, it is frustrating. Does anyone else feel the same? Does the printer has no back light for LCD screen? or it has back light and I am just not able to get the settings right?

  • @lfraser8125
    @lfraser8125 Před 4 měsíci

    Once I had the printer and computer connected, I was stymied. It would NOT print a test page; it kept thinking I wanted to send a fax. Also, there was no "Manage" option offered once the printer was connected. I'm at my wit's end. This is ridiculous.

  • @Marasarj
    @Marasarj Před 6 měsíci

    I can’t get to the part “adjusting for the 1st use”. The scree just tells me the language. HELP!!!

  • @gavinvalencia7520
    @gavinvalencia7520 Před 5 měsíci

    Just bought this printer and tried everything to connect to anything lol i have tried manually and wirelessly and still get a 3441 error

  • @readmeright2010
    @readmeright2010 Před 4 měsíci

    I'm not understanding how to put the password number in

  • @tavarciare
    @tavarciare Před 3 měsíci

    My password is too long. Can I just use a a USB cable?

  • @sharonbeaumont4154
    @sharonbeaumont4154 Před rokem

    How can I restart to the beginning

    • @TricksTipsFix
      @TricksTipsFix  Před rokem +1

      Here I found on Canon's site how to reset the printer : support.usa.canon.com/kb/index?page=content&id=ART180489&actp=search&viewlocale=en_US&searchid=1638337053393

  • @MM-sc3zl
    @MM-sc3zl Před měsícem

    I been here 3 hours and this printer isnt found on any devices, i download app on phone as well and it doesnt print at all. This is terrible. 😮

  • @BonBon770
    @BonBon770 Před rokem

    What if it says failed to connect to wireless password

    • @MizzRoyalty
      @MizzRoyalty Před rokem +1

      The wifi password you entered is incorrect

    • @BonBon770
      @BonBon770 Před rokem

      @@MizzRoyalty tu

  • @childofGod316Adri
    @childofGod316Adri Před 3 měsíci

    for the password how do you use numbers ?

  • @mysterymann187
    @mysterymann187 Před 6 měsíci

    Did he show how to fax anything?

  • @502rcp
    @502rcp Před 9 měsíci

    Doesn't work for me. POS loses connection with the wifi and have to start all over. (Wifi is strong and signal is steady) Has happened twice, and now refers me to the "instructions on the comuter or smartphone" And where the hell are they? I bought this trash at Best Buy and it started its little tricks after 15 days return deadline. Oh, also getting a "black ink running low" and I've printed less than 50 pages. Open to suggestions for a replacement...oh, and I'll be buying it at Amazon where there's a decent return policy.

  • @3100fps
    @3100fps Před 11 měsíci

    WILL NOT WORK WITH WINDOWS 7

  • @sharonbeaumont4154
    @sharonbeaumont4154 Před rokem

    It never asked me for a password