How to convert TT01 to RWD drift car-stage1(TT01 후륜드리프트카 개조)
Vložit
- čas přidán 30. 08. 2021
- TT01 RWD conversion kit link : www.cgtrader.com/3d-print-mod...
I will show you how to convert Tamiya TT-01 chassis into an rwd drift car with a simple task.
There is no need for CNC machining, but 3D printing is required.
Stage-1 is a concept that uses many parts of TT-01 chassis at low cost.
In Stage 2, I will plan to prepare a more upgraded version.
Inner:3mm, outer:6mm, thickness-2.5mm flange bearing link is
ko.aliexpress.com/item/100500...
간단한 작업으로 타미야 TT-01 새시를 rwd 드리프트카로 개조하는 방법을 공개합니다.
단, cnc머시닝등의 작업은 필요 없으나 3d 프린트 출력이 필요합니다.
스테이지-1 과정에서는 TT-01 새시의 부품을 최대한 사용하여 저비용으로 제작하는 컨셉입니다.
다음에 다룰 스테이지 2 에서는 더 업그레이드 된 버전을 준비할 예정입니다. - Auta a dopravní prostředky
다음버전도 기대중입니다!
ㅎㅎ,기대해 주셔서 감사합니다😄
Thank you so much for sharing. Great conversion.
Thank you.🤗
That's some insane steering angles 😱
Printing this as im typing! Cant waite to build it!
Thanks for sharing!!! I will do this to my tt01 now. Thank you
Thank you. Hope you enjoy the drift after completion. 🤭
Inspired! I will attempt the same with sg 1604 platform. Thanks for sharing your many projects with the world!
Thank you.🤗
how did it go
@@18kingen I have been too tied up with 1/24 builds to get to it. There's one guy who's done a bellcrank conversion and his design is not the greatest but a good proof of concept. He retained stock suspension geometry and knuckles. He gets a decent angle but not parallel Ackerman.
Great video also and thanks for the help
Thank you.🤗
Even without GYRO! You drift well bruh!
Thank you.🤗
this is so cool
아 이런 정말 대단합니다 저도 제우스님 데이터로 만들어봐야겠네요
감사합니다. 메일주소 남겨주시면 보내드리겠습니다.🤗
@@zeusgarage4368 can’t find your Facebook
す、凄いアッカーマンも切れ角もすごくいい
Wow...this is really an amazing video, I love this old chassis even if it's designed so NiMh in mind :p I have a very old beaten up TT01 chassis and this is a way to bring it back to life... 😊 Thank you for sharing! Did you design the parts?
Yes. I designed all parts.
Mantap bossku, hsp flying fish
Thank you.🤗
Hi, i love your things they are exzellent. Perhaps you can make a Frontspoiler like the Heckdiffusor. That were nice
I hope you can sell the whole angle kit for this tt01 including all the hardware.
혹시 차량에 사용하신 쇽이 아카데미껀가요?
맞다면 같은 아카데미 유저로서 되게 반가울 것 같군요 ㅎㅎㅎ
그나저나 실력이 ㅎㄷㄷ 하십니다 ㅎㅎㅎ
감사합니다. 네 아카데미 제 쇽입니다.🤗
Great video and awesome conversion. Would you mind sharing the stl files to print the parts for this rwd conversion? Thanks again
Thanks a lot. ☺TT01 RWD conversion kit link is above.
Awesome conversion man, great job! Can you leave a 3d files so we can also print it at home! Thanks!
Thank you. TT01 RWD conversion kit link is above.
Will this work on the tt01e chassie iv tryed to see what is different or the tt02
Nice job .il Love tto1 upgrade .please i have file 3d for mi
TT01 RWD conversion kit link is above.
Nice drift DIY, does it work for TT02? *Do you sell the parts? i can buy from you? thanks Zeus~
Wonderful work! Can this be applied to a TT01e car?
yeah, they're the same thing, the only difference is the top deck, and from what they advertise, "a lower center of gravity" but I don't think that's true.
Have you converted a fazer MK2 into a drift car (Idea maybe lol)
Hello sir awesome work, is it going to work with TT 02D ? Regards
I'm sorry. tt02d doesn't seem to work because the parts are different.
The files in cgtrader, is it for the parts of this video with the servo in the front or the file are for the servo in the back of stage 3? Because i wanted the version for the servo in the front like this video
Files for front servo version. Thank you.🤗
Are your parts aviable for buying completely? I dont have a 3d printer but I would like the parts
Do I have to buy four 3mm 38 mm shafts?
Very great!! I Have a old TT01 somewhere at home! Can you upload the files, please? Thank you!
I added download site link above.🤗
@@zeusgarage4368 👍😎👍
Can you give me the links to the designs please
Wo steht welche Teile ich zukaufen muß?
Where can I buy a 17mm long ball ends like in the video?I have already ordered similar ones once, but they did not fit
Similar parts are available on Ali.
www.aliexpress.com/item/1005003816922760.html?spm=a2g0o.productlist.0.0.7b555cf7ZEl6uE&algo_pvid=a1e1d253-74e8-4240-9cc6-4ed88a60de68&algo_exp_id=a1e1d253-74e8-4240-9cc6-4ed88a60de68-23&pdp_ext_f=%7B%22sku_id%22%3A%2212000027261009493%22%7D&pdp_pi=-1%3B3.98%3B-1%3B-1%40salePrice%3BUSD%3Bsearch-mainSearch
hi..i really love it..can i have the file..
TT01 RWD conversion kit link is above.
Great video. I’m getting everything printed. What size is the steering arm bearing?
Thank you. Flange bearing( out-6mm, in-3mm, 2.5t)*4ea.🤗
@@zeusgarage4368 thanks. What size ball connectors do we use?
@@zeusgarage4368 5mm ball connectors?
@@c33jp I used 4.3mm ball connectors.🤭
@@zeusgarage4368 and yd2 4.8mm ball end caps?
Hey i have ordered the bearings along with some other parts ready to install this upgrade. I was just wondering if it would still work without changing front and back dampers? Also is the servo upgrade 100% necessary? Thank you
The most important thing in the drift setting is to use a high speed servo. Otherwise, vibration will occur when using a gyro. And changing to soft dampers helps side sliding.☺
@@zeusgarage4368 Thanks for the speedy reply, I don't intend to install gyro right now but I should probably look into an improved servo then. Purchasing you tt-01 files later. Is there a link to your k969/k989 files also?
@@phaide1601 Leave email addresss on my facebook(link is on this channel home.).
Sent my email address over on facebook message. Thanks!
@@phaide1601 I sent a reply. Thank you.
🤗
Gửi cho em xin phần mềm in để em tự in được không anh
Free stl?????
Any chance you sell the conversation for the front steering
TT01 RWD conversion kit link : www.cgtrader.com/3d-print-models/hobby-diy/other/tamiya-tt01-rwd-drift-car-conversion-kit
😅,💥💥💥
I bought the "Tamiya TT01 RWD drift car conversion kit with interior parts" but it does not have the file for the caps. 9:03
I'm very sorry. I just uploaded a file.😂
@@zeusgarage4368 I needed is asap so I bought both of the build files. In the first one (without interior) I found the caps.
❤👍🏆👑🌞🔥😎♥️😊🤣
do you share the 3d print file for steering tt01 rwd please i really want to make the turns sharp hhe
TT01 RWD conversion kit link : www.cgtrader.com/3d-print-models/hobby-diy/other/tamiya-tt01-rwd-drift-car-conversion-kit
Check out How to convert k969 to rwd drift car stage-1(저렴하고 쉽게 k969 를 rwd 드리프트카로 개조하기) : czcams.com/video/Dl6sG_AUM2A/video.html
what reciever/controller do you use?
Sorry for late reply. I used Radiorink(Rc6gs,R7fg) parts.
Where's best to contact in order to get the 3D files?
TT01 RWD conversion kit link is above.
hello i could get the files. long I was looking for something similar thank you
@@dominikgulas3580
TT01 RWD conversion kit link is above.
Nice video, how do i get the files?
TT01 RWD conversion kit link : www.cgtrader.com/3d-print-models/hobby-diy/other/tamiya-tt01-rwd-drift-car-conversion-kit
안녕하세요. 혹시 tt02에도 적용이 가능할까요..?
아쉽게도 tt02과는 호환이 되질 않습니다. tt01과 tt02는 서스펜션 구조가 많이 틀려서 거의 다른 차라고 보시면 됩니다.😂
Hi, man, could you send me 3d file, that’s be really nice, can’t find it on google
TT01 RWD conversion kit link is above.🤗
I sent you a pm on your facebook page I would like to get the files as well
Will your 3D parts also fit the TT-01E?
It seems possible.🙂
@@zeusgarage4368 Will just the front suspension & steering parts work? I see you added the TT01E brace in the stage 2 video.
@@mikesofunny Sorry. I misunderstood it with tt02. tt01e is possible.
@@zeusgarage4368 Thanks, I will be printing the files soon!
Hi, where can i get gold of the stl files please?
What means of "gold of stl"? Download link for RWD is above.
@@zeusgarage4368 sorry, was suppose to say, hold.
Was wondering where I could get hold of the STL files, thanks, Drew.
Hello, would you be interested in the files, could you send them to me?
TT01 RWD conversion kit link is above.
Can I please get the 3d printed files thanks
TT01 RWD conversion kit link is above.
Hi, I have these files, but i didnt get the cups that attach the upper and lower arms to the chassis, any way you can email them to me? the ones shown at 9:09
Hi can you help me? May i know the part number for the "long ball ends" shown in 7:43 ?
Could you please share the files to 3D printing these parts ?
I added download site link above.🤗
@@zeusgarage4368
Thank you very kind of you
@@zeusgarage4368
I can not see any link above
I want to have a rc car but I can't afford it
Hi, i’m interested. Can i get the file please?
TT01 RWD conversion kit link is above.🤗
Is it gonna fit to TT02???
It doesn't fit tt02. But I'll make rwd parts for tt02 soon. I recently purchased a tt02 kit to make rwd parts.🤗
@@zeusgarage4368 great! I will waiting to buy IT ♥️
Great video, can you send me the stl file?
TT01 RWD conversion kit link is above.
@@zeusgarage4368 cool job! pls, can you share STL files?
can you please send me the stl files?
TT01 RWD conversion kit link is above.
can fit for hsp 94123
I don't have an hsp so I'm not sure. I'm sorry.
What social network can I contact you?
저는 TT-02키트입니다
만들고싶습니다 ㅠㅠ
3D 프린터 가게에서
이메일로받음 자료 보여주면 만들어줄까요?
@@user-pi6bq7kg4v 네 그대로 출력해달라고 하시면 됩니다.
프린터매장에 문의했어는데 가격이너무비싸내요 ...ㅠㅠ
Check out Tamiya TT02 RWD conversion with 3d printer : czcams.com/video/QUsKKTEY4Us/video.html
Would love to see a tt02 rwd
Hey we'd like to have the file 😊 PM the email Adress to you ?
TT01 RWD conversion kit link is above.